1tracker-daemon(1) User Commands tracker-daemon(1)
2
6 tracker-daemon - Start, stop, restart and list daemons responsible for
7 indexing content
8
11 tracker daemon [options...]
12 tracker daemon -s | -t [daemons] | -k [daemons] | -l
13 tracker daemon -f | -w [ontology]
14 tracker daemon --miner <miner> --pause[-for-process] <reason>
15 tracker daemon --miner <miner> --resume <cookie>
16
20 Tracker has many components to it including a "store" for handling data
21 set updates and "miners" for handling data mining in their respective
22 areas.
23 The tracker daemon command allows for control of these components.
25 This ranges from starting, stopping and killing processes to pausing
26 and resuming them.
27 In addition to all this, there are ways to change the log verbsity for
29 all processes that generate logs and to follow or watch what is happen‐
30 ing in real time from a top level and right down where the SPARQL com‐
31 mits are happening too.
32 If no arguments are provided this command will show the current status
34 of all Tracker entities (store and all available data miners).
35 For tracker-store, the status is always "Idle" unless it is restoring a
37 backup and/or replaying a journal (see also tracker reset --soft). For
38 a list of common statuses, see --list-common-statuses.
39 The data miners can be paused or resumed using this command and you can
41 also list miners running and available.
42
45 -p, --list-processes
46 This lists all Tracker processes in the system.
47 -k, --kill=[daemons]
49 This uses SIGKILL to stop all Tracker processes found matching
50 the parameter, if no extra parameter is passed, "all" will be
51 assumed. This is not advised unless you are having problems
52 stopping Tracker in the first place. This GUARANTEES death.
53 The possible daemons options are:
55 · all - All daemons.
57 · store - Only the tracker-store.
59 · miners - Only data miners.
61 -t, --terminate=[daemons]
65 This uses SIGTERM to stop all Tracker processes found matching
66 the parameter, if no extra parameter is passed, "all" will be
67 assumed. This is recommended over --kill because it gives the
68 processes time to shutdown cleanly.
69 For a list of possible daemons, see --kill.
71 -s, --start
73 Starts all miners. This indirectly starts tracker-store too
74 because it is needed for miners to operate properly. The store
75 is started from D-Bus.
76 --get-log-verbosity
78 This displays the log verbosity for ALL components using GSet‐
79 tings for this configuration. For possible values, see
80 --set-log-verbosity.
81 --set-log-verbosity=<verbosity>
83 This sets the log verbosity for ALL daemons using GSettings to
84 store their "verbosity" configuration.
85 The possible verbosity options are:
87 · debug - Show EVERYTHING, from debug messages to errors.
89 This often includes actual SQL being executed.
90 · detailed - Show enough detail to understand what is happen‐
92 ing.
93 · minimal - Show an overview of what is going on, e.g. stats
95 and when things start or stop.
96 · errors - Show only warnings, criticals, errors or fatal
98 events.
99 -f, --follow
102 Follow status changes to daemons as they happen. This is a top
103 level view of what is happening. You will see the name for each
104 daemon and a state with the progress in that state.
105 This requires Ctrl+C to stop and return to the command line.
107 Each new status is put on a new line.
108 -w, --watch=[ontology]
111 Watch changes that happen to the database in real time. This
112 requires Ctrl+C to stop and return to the command line.
113 If ontology is unspecified, all updates are shown. The ontology
115 can be a comma separated list of shorthand or long hand ontology
116 properties. For example:
117 $ tracker-control -w nie:url,nie:mimeType,nfo:fileSize,nie:dataSource
119 Now listening for resource updates to the database
120 All nie:plainTextContent properties are omitted
121 Press Ctrl+C to stop
123 'nfo:Document'
125 'nfo:fileSize' = '1770'
126 'nie:dataSource' = 'http://www.tracker-project.org/ontologies/tracker#extractor-data-source'
127 'nie:mimeType' = 'text/plain'
128 'nie:url' = 'file:///home/martyn/.bash_aliases'
129 'nfo:Document'
130 'nie:dataSource' = 'http://www.tracker-project.org/ontologies/tracker#extractor-data-source'
131 ...
133 --list-common-statuses
136 This will list statuses most commonly produced by miners and the
137 store. These statuses are not translated when sent over D-Bus
138 and should be translated by each application. These are not con‐
139 sidered static and are subject to change at any point.
140 Additionally, these statuses are not the only ones which may be
142 reported by a miner. There may be other states pertaining to the
143 specific roles of the miner in question.
144 --list-miners-running
146 This will list all miners which have responded to a D-Bus call.
147 Sometimes it is helpful to use this command with --list-min‐
148 ers-available.
149 --list-miners-available
151 This will list all miners which are available even if they are
152 not running at the moment.
153 --pause-details
155 For listing all miners which are paused and the reasons for
156 being paused, you can use this. It will also display the appli‐
157 cation that requested the pause too.
158 --miner=<miner>
160 This argument is used with --pause or --resume to say which
161 miner you want to pause or resume. You can use the full D-Bus
162 name, e.g. "org.freedesktop.Tracker1.Miner.Files" OR you can use
163 the suffix, e.g. "Files".
164 --pause=<reason>
166 The reason here is useful to know WHY the miner should be
167 paused. A miner can be paused many times by multiple applica‐
168 tions. Only when all pauses have been resumed will it continue.
169 If successful, a cookie will be given to uniquely identify the
170 request. This cookie is used to resume the pause at a later
171 stage.
172 --pause-for-process=<reason>
174 This works exactly the same way as --pause with the exception
175 that it only keeps the pause active while the calling process is
176 alive. As soon as you press Ctrl+C the pause is resumed automat‐
177 ically.
178 --resume=<cookie>
180 The cookie is given by a successful --pause command. It is a
181 number which identifies each pause request. When all pauses have
182 been resumed, the miner will resume working.
183
186 tracker-store(1).
187GNU September 2014 tracker-daemon(1)