1MODE2(1)                         User Commands                        MODE2(1)
2
3
4

NAME

6       mode2,  smode2,  xmode2 - shows the pulse/space length of infrared sig‐
7       nals
8

SYNOPSIS

10       xmode2 [options]
11

DESCRIPTION

13       The main purpose of these programs is to check operation of your  home-
14       brew  LIRC  receiver  hardware and to see the IR waveform of the remote
15       controller without an expensive oscilloscope. Very  useful  for  debug‐
16       ging.  Of course this program won't work with hardware that decodes the
17       signals itself like e.g. TV cards or the Irman.
18
19
20       xmode2 is based on smode2 by Sinkovics Zoltan. It is just a  conversion
21       from  svga  to X with some basic support for resizing. The only differ‐
22       ences are that the --mode option enables an  alternative  display  mode
23       and that xmode2 can read and visualise mode2 output from stdin.
24
25       -h --help
26              display usage summary
27
28       -v --version
29              display version
30
31       -d --device=device
32              read from given device
33
34       -H --driver=driver
35              use given driver
36
37       -g --geometry=geometry window geometry
38
39       -t --timediv=value
40              ms per unit
41
42       -m --mode
43              enable alternative display mode
44
45       -r --raw
46              access device directly
47

SEE ALSO

49       mode2(1), smode2(1), xmode2(1)
50
51       The  documentation  for  lirc  is  maintained  as  html pages. They are
52       located under html/ in the documentation directory.
53
54
55
56mode2 0.9.0                       March 2011                          MODE2(1)