sane-magicolor(5)

1sane-magicolor(5)        SANE Scanner Access Now Easy        sane-magicolor(5)
2
3
4

NAME

6       sane-magicolor - SANE backend for KONICA MINOLTA magicolor scanners
7

DESCRIPTION

9       The  sane-magicolor  backend supports KONICA MINOLTA magicolor scanners
10       connected via USB or LAN. Currently, only the magicolor  1690MF  device
11       is  supported,  no  other  devices  with the same scanning protocol are
12       known.
13

SUPPORTED DEVICES

15       The following scanner should work with this backend:
16
17       Device Details
18       -----------------------------
19       Vendor: KONICA MINOLTA
20       Model: magicolor 1690MF
21
22

CONFIGURATION

24       This section decribes the backend's  configuration  file  entries.  The
25       file is located at:
26
27              /etc/sane.d/magicolor.conf
28
29       For a proper setup, at least one of the following entries are needed:
30
31              net autodiscovery
32              net [IP ADDRESS] [DEVICE-ID]
33              usb
34              usb [VENDOR-ID] [DEVICE-ID]
35
36

FILES

38       /etc/sane.d/magicolor.conf
39              The backend configuration file
40
41       /usr/lib64/sane/libsane-magicolor.a
42              The static library implementing this backend.
43
44       /usr/lib64/sane/libsane-magicolor.so
45              The shared library implementing this backend (present on systems
46              that support dynamic loading).
47

ENVIRONMENT

49       SANE_CONFIG_DIR
50              This environment variable specifies the list of directories that
51              may contain the configuration file.  Under UNIX, the directories
52              are separated by a colon (`:'), under OS/2, they  are  separated
53              by a semi-colon (`;').  If this variable is not set, the config‐
54              uration file is searched in two default directories: first,  the
55              current working directory (".") and then in /etc/sane.d.  If the
56              value of the environment variable ends with the directory  sepa‐
57              rator character, then the default directories are searched after
58              the explicitly  specified  directories.   For  example,  setting
59              SANE_CONFIG_DIR  to  "/tmp/config:"  would result in directories
60              "/tmp/config", ".", and "/etc/sane.d" being  searched  (in  this
61              order).
62
63       SANE_DEBUG_MAGICOLOR
64              If  the  library  was  compiled with debug support enabled, this
65              environment variable controls the debug level for this  backend.
66              Higher debug levels increase the verbosity of the output.
67
68              Example: export SANE_DEBUG_MAGICOLOR=127
69
70              To  obtain debug messages from the backend, set this environment
71              variable before calling your favorite  frontend  (e.g.  xscanim‐
72              age).
73
74              Example: SANE_DEBUG_MAGICOLOR=65 xscanimage
75

KNOWN BUGS AND RESTRICTIONS

77       Large  color  scans  may  sometimes timeout due to unknown reasons (the
78       scanner simply stops returning data)
79
80       Cancelling large scans may lock up the scanner.
81

AUTHOR

87       Reinhold Kainhofer <reinhold@kainhofer.com>
88
89
90
91                                  10 Jan 2011                sane-magicolor(5)