1CDB_File(3) User Contributed Perl Documentation CDB_File(3)
2
6 CDB_File - Perl extension for access to cdb databases
7
9 use CDB_File;
10 $c = tie %h, 'CDB_File', 'file.cdb' or die "tie failed: $!\n";
11 $fh = $c->handle;
13 sysseek $fh, $c->datapos, 0 or die ...;
14 sysread $fh, $x, $c->datalen;
15 undef $c;
16 untie %h;
17 $t = new CDB_File ('t.cdb', "t.$$") or die ...;
19 $t->insert('key', 'value');
20 $t->finish;
21 CDB_File::create %t, $file, "$file.$$";
23 or
25 use CDB_File 'create';
27 create %t, $file, "$file.$$";
28
30 CDB_File is a module which provides a Perl interface to Dan Bernstein's
31 cdb package:
32 cdb is a fast, reliable, lightweight package for creating and
34 reading constant databases.
35 Reading from a cdb
37 After the "tie" shown above, accesses to %h will refer to the cdb file
38 "file.cdb", as described in "tie" in perlfunc.
39 Low level access to the database is provided by the three methods
41 "handle", "datapos", and "datalen". To use them, you must remember the
42 "CDB_File" object returned by the "tie" call: $c in the example above.
43 The "datapos" and "datalen" methods return the file offset position and
44 length respectively of the most recently visited key (for example, via
45 "exists").
46 Beware that if you create an extra reference to the "CDB_File" object
48 (like $c in the example above) you must destroy it (with "undef")
49 before calling "untie" on the hash. This ensures that the object's
50 "DESTROY" method is called. Note that "perl -w" will check this for
51 you; see perltie for further details.
52 Creating a cdb
54 A cdb file is created in three steps. First call "new CDB_File
55 ($final, $tmp)", where $final is the name of the database to be
56 created, and $tmp is the name of a temporary file which can be
57 atomically renamed to $final. Secondly, call the "insert" method once
58 for each (key, value) pair. Finally, call the "finish" method to
59 complete the creation and renaming of the cdb file.
60 Alternatively, call the "insert()" method with multiple key/value
62 pairs. This can be significantly faster because there is less crossing
63 over the bridge from perl to C code. One simple way to do this is to
64 pass in an entire hash, as in: "$cdbmaker->insert(%hash);".
65 A simpler interface to cdb file creation is provided by
67 "CDB_File::create %t, $final, $tmp". This creates a cdb file named
68 $final containing the contents of %t. As before, $tmp must name a
69 temporary file which can be atomically renamed to $final.
70 "CDB_File::create" may be imported.
71
73 These are all complete programs.
74 1. Convert a Berkeley DB (B-tree) database to cdb format.
76 use CDB_File;
78 use DB_File;
79 tie %h, DB_File, $ARGV[0], O_RDONLY, undef, $DB_BTREE or
81 die "$0: can't tie to $ARGV[0]: $!\n";
82 CDB_File::create %h, $ARGV[1], "$ARGV[1].$$" or
84 die "$0: can't create cdb: $!\n";
85 2. Convert a flat file to cdb format. In this example, the flat file
87 consists of one key per line, separated by a colon from the value.
88 Blank lines and lines beginning with # are skipped.
89 use CDB_File;
91 $cdb = new CDB_File("data.cdb", "data.$$") or
93 die "$0: new CDB_File failed: $!\n";
94 while (<>) {
95 next if /^$/ or /^#/;
96 chop;
97 ($k, $v) = split /:/, $_, 2;
98 if (defined $v) {
99 $cdb->insert($k, $v);
100 } else {
101 warn "bogus line: $_\n";
102 }
103 }
104 $cdb->finish or die "$0: CDB_File finish failed: $!\n";
105 3. Perl version of cdbdump.
107 use CDB_File;
109 tie %data, 'CDB_File', $ARGV[0] or
111 die "$0: can't tie to $ARGV[0]: $!\n";
112 while (($k, $v) = each %data) {
113 print '+', length $k, ',', length $v, ":$k->$v\n";
114 }
115 print "\n";
116 4. For really enormous data values, you can use "handle", "datapos",
118 and "datalen", in combination with "sysseek" and "sysread", to avoid
119 reading the values into memory. Here is the script bun-x.pl, which can
120 extract uncompressed files and directories from a bun file.
121 use CDB_File;
123 sub unnetstrings {
125 my($netstrings) = @_;
126 my @result;
127 while ($netstrings =~ s/^([0-9]+)://) {
128 push @result, substr($netstrings, 0, $1, '');
129 $netstrings =~ s/^,//;
130 }
131 return @result;
132 }
133 my $chunk = 8192;
135 sub extract {
137 my($file, $t, $b) = @_;
138 my $head = $$b{"H$file"};
139 my ($code, $type) = $head =~ m/^([0-9]+)(.)/;
140 if ($type eq "/") {
141 mkdir $file, 0777;
142 } elsif ($type eq "_") {
143 my ($total, $now, $got, $x);
144 open OUT, ">$file" or die "open for output: $!\n";
145 exists $$b{"D$code"} or die "corrupt bun file\n";
146 my $fh = $t->handle;
147 sysseek $fh, $t->datapos, 0;
148 $total = $t->datalen;
149 while ($total) {
150 $now = ($total > $chunk) ? $chunk : $total;
151 $got = sysread $fh, $x, $now;
152 if (not $got) { die "read error\n"; }
153 $total -= $got;
154 print OUT $x;
155 }
156 close OUT;
157 } else {
158 print STDERR "warning: skipping unknown file type\n";
159 }
160 }
161 die "usage\n" if @ARGV != 1;
163 my (%b, $t);
165 $t = tie %b, 'CDB_File', $ARGV[0] or die "tie: $!\n";
166 map { extract $_, $t, \%b } unnetstrings $b{""};
167 5. Although a cdb file is constant, you can simulate updating it in
169 Perl. This is an expensive operation, as you have to create a new
170 database, and copy into it everything that's unchanged from the old
171 database. (As compensation, the update does not affect database
172 readers. The old database is available for them, till the moment the
173 new one is "finish"ed.)
174 use CDB_File;
176 $file = 'data.cdb';
178 $new = new CDB_File($file, "$file.$$") or
179 die "$0: new CDB_File failed: $!\n";
180 # Add the new values; remember which keys we've seen.
182 while (<>) {
183 chop;
184 ($k, $v) = split;
185 $new->insert($k, $v);
186 $seen{$k} = 1;
187 }
188 # Add any old values that haven't been replaced.
190 tie %old, 'CDB_File', $file or die "$0: can't tie to $file: $!\n";
191 while (($k, $v) = each %old) {
192 $new->insert($k, $v) unless $seen{$k};
193 }
194 $new->finish or die "$0: CDB_File finish failed: $!\n";
196
198 Most users can ignore this section.
199 A cdb file can contain repeated keys. If the "insert" method is called
201 more than once with the same key during the creation of a cdb file,
202 that key will be repeated.
203 Here's an example.
205 $cdb = new CDB_File ("$file.cdb", "$file.$$") or die ...;
207 $cdb->insert('cat', 'gato');
208 $cdb->insert('cat', 'chat');
209 $cdb->finish;
210 Normally, any attempt to access a key retrieves the first value stored
212 under that key. This code snippet always prints gato.
213 $catref = tie %catalogue, CDB_File, "$file.cdb" or die ...;
215 print "$catalogue{cat}";
216 However, all the usual ways of iterating over a hash---"keys",
218 "values", and "each"---do the Right Thing, even in the presence of
219 repeated keys. This code snippet prints cat cat gato chat.
220 print join(' ', keys %catalogue, values %catalogue);
222 And these two both print cat:gato cat:chat, although the second is more
224 efficient.
225 foreach $key (keys %catalogue) {
227 print "$key:$catalogue{$key} ";
228 }
229 while (($key, $val) = each %catalogue) {
231 print "$key:$val ";
232 }
233 The "multi_get" method retrieves all the values associated with a key.
235 It returns a reference to an array containing all the values. This
236 code prints gato chat.
237 print "@{$catref->multi_get('cat')}";
239 "multi_get" always returns an array reference. If the key was not
241 found in the database, it will be a reference to an empty array. To
242 test whether the key was found, you must test the array, and not the
243 reference.
244 $x = $catref->multiget($key);
246 warn "$key not found\n" unless $x; # WRONG; message never printed
247 warn "$key not found\n" unless @$x; # Correct
248 The "fetch_all" method returns a hashref of all keys with the first
250 value in the cdb. This is useful for quickly loading a cdb file where
251 there is a 1:1 key mapping. In practice it proved to be about 400%
252 faster then iterating a tied hash.
253 # Slow
255 my %copy = %tied_cdb;
256 # Much Faster
258 my $copy_hashref = $catref->fetch_all();
259
261 The routines "tie", "new", and "finish" return undef if the attempted
262 operation failed; $! contains the reason for failure.
263
265 The following fatal errors may occur. (See "eval" in perlfunc if you
266 want to trap them.)
267 Modification of a CDB_File attempted
269 You attempted to modify a hash tied to a CDB_File.
270 CDB database too large
272 You attempted to create a cdb file larger than 4 gigabytes.
273 [ Write to | Read of | Seek in ] CDB_File failed: <error string>
275 If error string is Protocol error, you tried to "use CDB_File" to
276 access something that isn't a cdb file. Otherwise a serious OS
277 level problem occurred, for example, you have run out of disk
278 space.
279
281 Sometimes you need to get the most performance possible out of a
282 library. Rumour has it that perl's tie() interface is slow. In order to
283 get around that you can use CDB_File in an object oriented fashion,
284 rather than via tie().
285 my $cdb = CDB_File->TIEHASH('/path/to/cdbfile.cdb');
287 if ($cdb->EXISTS('key')) {
289 print "Key is: ", $cdb->FETCH('key'), "\n";
290 }
291 For more information on the methods available on tied hashes see
293 perltie.
294
296 The "create()" interface could be done with "TIEHASH".
297
299 cdb(3).
300
302 Tim Goodwin, <tjg@star.le.ac.uk>. CDB_File began on 1997-01-08.
303 Now maintained by Matt Sergeant, <matt@sergeant.org>
305perl v5.28.0 2016-07-18 CDB_File(3)