1dune-uninstall(1) Dune Manual dune-uninstall(1)
2
6 dune-uninstall - Uninstall packages.
7
9 dune uninstall [OPTION]... [PACKAGE]...
10
12 --build-info
13 Show build information.
14 --context=CONTEXT
16 Select context to install from. By default, install files from all
17 defined contexts.
18 --destdir=PATH (absent DESTDIR env)
20 When passed, this directory is prepended to all installed paths.
21 --dry-run
23 Only display the file operations that would be performed.
24 -f, --force
26 Force actions associated to aliases to be re-executed even if their
27 dependencies haven't changed.
28 --help[=FMT] (default=auto)
30 Show this help in format FMT. The value FMT must be one of `auto',
31 `pager', `groff' or `plain'. With `auto', the format is `pager` or
32 `plain' whenever the TERM env var is `dumb' or undefined.
33 --libdir=PATH
35 Directory where library files are copied, relative to prefix or
36 absolute. If --prefix is specified the default is $prefix/lib,
37 otherwise it is the output of ocamlfind printconf destdir
38 --mandir=PATH
40 When passed, manually override the directory to install man pages
41 --prefix=PREFIX
43 Directory where files are copied. For instance binaries are copied
44 into $prefix/bin, library files into $prefix/lib, etc... It
45 defaults to the current opam prefix if opam is available and
46 configured, otherwise it uses the same prefix as the ocaml
47 compiler.
48 --sandbox=VAL (absent DUNE_SANDBOX env)
50 Sandboxing mode to use by default. Some actions require a certain
51 sandboxing mode, so they will ignore this setting. The allowed
52 values are: none, symlink, copy.
53 --sections=VAL
55 sections that should be installed
56 --version
58 Show version information.
59 -w, --watch
61 Instead of terminating build after completion, wait continuously
62 for file changes.
63
65 These options are common to all commands.
66 --always-show-command-line
68 Always show the full command lines of programs executed by dune
69 --auto-promote
71 Automatically promote files. This is similar to running dune
72 promote after the build.
73 --build-dir=FILE (absent DUNE_BUILD_DIR env)
75 Specified build directory. _build if unspecified
76 --cache=VAL (absent DUNE_CACHE env)
78 Activate binary cache (either `disabled' or `enabled'). Default is
79 `disabled'.
80 --cache-check-probability=VAL (absent=0. or
82 DUNE_CACHE_CHECK_PROBABILITY env)
83 Probability cached rules are rerun to check for reproducibility
84 --cache-duplication=VAL (absent DUNE_CACHE_DUPLICATION env)
86 Binary cache duplication mode
87 --cache-transport=VAL (absent DUNE_CACHE_TRANSPORT env)
89 Binary cache protocol
90 --config-file=FILE
92 Load this configuration file instead of the default one.
93 --debug-backtraces
95 Always print exception backtraces.
96 --debug-dependency-path
98 In case of error, print the dependency path from the targets on the
99 command line to the rule that failed.
100 --debug-findlib
102 Debug the findlib sub-system.
103 --default-target=TARGET (absent=@@default)
105 Set the default target that when none is specified to dune build.
106 --diff-command=VAL
108 Shell command to use to diff files. Use - to disable printing the
109 diff.
110 --disable-promotion (absent DUNE_DISABLE_PROMOTION env)
112 Disable all promotion rules
113 --display=MODE
115 Control the display mode of Dune. See dune-config(5) for more
116 details.
117 --ignore-promoted-rules
119 Ignore rules with (mode promote), except ones with (only ...). The
120 variable %{ignoring_promoted_rules} in dune files reflects whether
121 this option was passed or not.
122 -j JOBS
124 Run no more than JOBS commands simultaneously.
125 --no-buffer
127 Do not buffer the output of commands executed by dune. By default
128 dune buffers the output of subcommands, in order to prevent
129 interleaving when multiple commands are executed in parallel.
130 However, this can be an issue when debugging long running tests.
131 With --no-buffer, commands have direct access to the terminal. Note
132 that as a result their output won't be captured in the log file.
133 You should use this option in conjunction with -j 1, to avoid
134 interleaving. Additionally you should use --verbose as well, to
135 make sure that commands are printed before they are being executed.
136 --no-config
138 Do not load the configuration file
139 --no-print-directory
141 Suppress "Entering directory" messages
142 --only-packages=PACKAGES
144 Ignore stanzas referring to a package that is not in PACKAGES.
145 PACKAGES is a comma-separated list of package names. Note that this
146 has the same effect as deleting the relevant stanzas from dune
147 files. It is mostly meant for releases. During development, it is
148 likely that what you want instead is to build a particular
149 <package>.install target.
150 -p PACKAGES, --for-release-of-packages=PACKAGES
152 Shorthand for --release --only-packages PACKAGE. You must use this
153 option in your <package>.opam files, in order to build only what's
154 necessary when your project contains multiple packages as well as
155 getting reproducible builds.
156 --profile=VAL (absent DUNE_PROFILE env)
158 Select the build profile, for instance dev or release. The default
159 is dev.
160 --promote-install-files
162 Promote the generated <package>.install files to the source tree
163 --release
165 Put dune into a reproducible release mode. This is in fact a
166 shorthand for --root . --ignore-promoted-rules --no-config
167 --profile release --always-show-command-line
168 --promote-install-files --default-target @install. You should use
169 this option for release builds. For instance, you must use this
170 option in your <package>.opam files. Except if you already use -p,
171 as -p implies this option.
172 --root=DIR
174 Use this directory as workspace root instead of guessing it. Note
175 that this option doesn't change the interpretation of targets given
176 on the command line. It is only intended for scripts.
177 --store-orig-source-dir (absent DUNE_STORE_ORIG_SOURCE_DIR env)
179 Store original source location in dune-package metadata
180 --terminal-persistence=MODE
182 Changes how the log of build results are displayed to the console
183 between rebuilds while in --watch mode.
184 --trace-file=FILE
186 Output trace data in catapult format (compatible with
187 chrome://tracing)
188 --verbose
190 Same as --display verbose
191 --workspace=FILE (absent DUNE_WORKSPACE env)
193 Use this specific workspace file instead of looking it up.
194 -x VAL
196 Cross-compile using this toolchain.
197
199 Use `dune COMMAND --help' for help on a single command.
200
202 These environment variables affect the execution of uninstall:
203 DESTDIR
205 See option --destdir.
206 DUNE_BUILD_DIR
208 Specified build directory. _build if unspecified
209 DUNE_CACHE
211 Activate binary cache (either `disabled' or `enabled'). Default is
212 `disabled'.
213 DUNE_CACHE_CHECK_PROBABILITY
215 Probability cached rules are rerun to check for reproducibility
216 DUNE_CACHE_DUPLICATION
218 Binary cache duplication mode
219 DUNE_CACHE_TRANSPORT
221 Binary cache protocol
222 DUNE_DISABLE_PROMOTION
224 Disable all promotion rules
225 DUNE_PROFILE
227 Build profile. dev if unspecified or release if -p is set.
228 DUNE_SANDBOX
230 Sandboxing mode to use by default. (see --sandbox)
231 DUNE_STORE_ORIG_SOURCE_DIR
233 Store original source location in dune-package metadata
234 DUNE_WORKSPACE
236 Use this specific workspace file instead of looking it up.
237
239 Check bug reports at https://github.com/ocaml/dune/issues
240Dune n/a dune-uninstall(1)