1kexec(8)                         User Manuals                         kexec(8)
2
3
4

NAME

6       kexec - directly boot into a new kernel
7

SYNOPSIS

9       /sbin/kexec  [-v  (--version)]  [-f  (--force)]  [-x (--no-ifdown)] [-y
10       (--no-sync)] [-l (--load)]  [-p  (--load-panic)]  [-u  (--unload)]  [-e
11       (--exec)] [-t (--type)] [--mem-min=addr] [--mem-max=addr]
12
13

DESCRIPTION

15       kexec  is  a system call that enables you to load and boot into another
16       kernel from the currently running kernel.  kexec performs the  function
17       of  the  boot  loader  from  within  the kernel. The primary difference
18       between a standard system boot and a kexec boot is  that  the  hardware
19       initialization normally performed by the BIOS or firmware (depending on
20       architecture) is not performed during a kexec boot. This has the effect
21       of reducing the time required for a reboot.
22
23       Make sure you have selected CONFIG_KEXEC=y when configuring the kernel.
24       The CONFIG_KEXEC option enables the kexec system call.
25

USAGE

27       Using kexec consists of
28
29              (1) loading the kernel to be rebooted to into memory, and
30              (2) actually rebooting to the pre-loaded kernel.
31
32       To load a kernel, the syntax is as follows:
33
34              kexec   -l kernel-image   --append=command-line-options   --ini‐
35              trd=initrd-image
36
37       where kernel-image is the kernel file that you intend to reboot to.
38
39       Insert  the command-line parameters that must be passed to the new ker‐
40       nel  into  command-line-options.   Passing  the   exact   contents   of
41       /proc/cmdline  into  command-line-options  is  the safest way to ensure
42       that correct values are passed to the rebooting kernel.
43
44       The optional initrd-image is the initrd image to be used during boot.
45
46       It's also possible to invoke kexec without an option parameter. In that
47       case,  kexec  loads  the specified kernel and then invokes shutdown(8).
48       If the shutdown scripts of your Linux distribution support  kexec-based
49       rebooting,  they  then call kexec -e just before actually rebooting the
50       machine. That way, the machine does  a  clean  shutdown  including  all
51       shutdown scripts.
52
53

EXAMPLE

55       For   example,   if   the  kernel  image  you  want  to  reboot  to  is
56       /boot/vmlinux, the contents of /proc/cmdline is root=/dev/hda1, and the
57       path  to  the  initrd is /boot/initrd, then you would use the following
58       command to load the kernel:
59
60              kexec      -l /boot/vmlinux       --append=root=/dev/hda1 --ini‐
61              trd=/boot/initrd
62
63       After  this kernel is loaded, it can be booted to at any time using the
64       command:
65
66              kexec -e
67
68

OPTIONS

70       -d (--debug)
71              Enable debugging messages.
72
73       -S (--status)
74              Return 0 if the type (by default crash) is loaded. Can  be  used
75              in conjuction with -l or -p to toggle the type. Note this option
76              supersedes other options and it will not load or unload the ker‐
77              nel.
78
79       -e (--exec)
80              Run  the  currently loaded kernel. Note that it will reboot into
81              the loaded kernel without calling shutdown(8).
82
83       -f (--force)
84              Force an immediate kexec call, do not call shutdown(8) (contrary
85              to the default action without any option parameter). This option
86              performs the same actions like executing -l and -e in one call.
87
88       -h (--help)
89              Open a help file for kexec.
90
91       -i (--no-checks)
92              Fast reboot, no memory integrity checks.
93
94       -l (--load) kernel
95              Load the specified kernel into the current kernel.
96
97       -p (--load-panic)
98              Load the new kernel for use on panic.
99
100       -t (--type=type)
101              Specify that the new kernel is of this type.
102
103       -s (--kexec-file-syscall)
104              Specify that the new  KEXEC_FILE_LOAD  syscall  should  be  used
105              exclusively.
106
107       -c (--kexec-syscall)
108              Specify  that  the  old KEXEC_LOAD syscall should be used exclu‐
109              sively (the default).
110
111       -a (--kexec-syscall-auto)
112              Try the new KEXEC_FILE_LOAD syscall first and  when  it  is  not
113              supported  or  the kernel does not understand the supplied image
114              fall back to the old KEXEC_LOAD interface.
115
116              There is no one single interface that always works.
117
118              KEXEC_FILE_LOAD is required  on  systems  that  use  locked-down
119              secure  boot  to verify the kernel signature.  KEXEC_LOAD may be
120              also disabled in the kernel configuration.
121
122              KEXEC_LOAD is required for some  kernel  image  formats  and  on
123              architectures that do not implement KEXEC_FILE_LOAD.
124
125       -u (--unload)
126              Unload  the  current kexec target kernel. If a capture kernel is
127              being unloaded then specify -p with -u.
128
129       -v (--version)
130              Return the version number of the installed utility.
131
132       -x (--no-ifdown)
133              Shut down the running  kernel,  but  restore  the  interface  on
134              reload.
135
136       -y (--no-sync)
137              Shut down the running kernel, but skip syncing the filesystems.
138
139       --mem-min=addr
140              Specify the lowest memory address addr to load code into.
141
142       --mem-max=addr
143              Specify the highest memory address addr to load code into.
144
145       --entry=addr
146              Specify  the  jump  back address. (0 means it's not jump back or
147              preserve context)
148
149       --load-preserve-context
150              Load the new kernel and preserve context of current kernel  dur‐
151              ing kexec.
152
153       --load-jump-back-helper
154              Load a helper image to jump back to original kernel.
155
156       --reuseinitrd
157              Reuse initrd from first boot.
158
159       --print-ckr-size
160              Print crash kernel region size, if available.
161
162
163

SUPPORTED KERNEL FILE TYPES AND OPTIONS

165       Beoboot-x86
166
167              --args-elf
168                     Pass ELF boot notes.
169
170              --args-linux
171                     Pass Linux kernel style options.
172
173              --real-mode
174                     Use the kernel's real mode entry point.
175
176       elf-x86
177
178              --append=string
179                     Append string to the kernel command line.
180
181              --command-line=string
182                     Set the kernel command line to string.
183
184              --reuse-cmdline
185                     Use  the  command  line  from  the running system. When a
186                     panic kernel is loaded, it strips the crashkernel parame‐
187                     ter  automatically.  The  BOOT_IMAGE  parameter  is  also
188                     stripped.
189
190              --initrd=file
191                     Use file as the kernel's initial ramdisk.
192
193              --ramdisk=file
194                     Use file as the kernel's initial ramdisk.
195
196       bzImage-x86
197
198              --append=string
199                     Append string to the kernel command line.
200
201              --command-line=string
202                     Set the kernel command line to string.
203
204              --reuse-cmdline
205                     Use the command line from  the  running  system.  When  a
206                     panic kernel is loaded, it strips the crashkernel parame‐
207                     ter  automatically.  The  BOOT_IMAGE  parameter  is  also
208                     stripped.
209
210              --initrd=file
211                     Use file as the kernel's initial ramdisk.
212
213              --ramdisk=file
214                     Use file as the kernel's initial ramdisk.
215
216              --real-mode
217                     Use real-mode entry point.
218
219       multiboot-x86
220
221              --command-line=string
222                     Set the kernel command line to string.
223
224              --reuse-cmdline
225                     Use  the  command  line  from  the running system. When a
226                     panic kernel is loaded, it strips the crashkernel parame‐
227                     ter  automatically.  The  BOOT_IMAGE  parameter  is  also
228                     stripped.
229
230              --module=mod arg1 arg2 ...
231                     Load module mod with command-line arguments arg1 arg2 ...
232                     This parameter can be specified multiple times.
233
234       multiboot2-x86
235
236              --command-line=string
237                     Set the kernel command line to string.
238
239              --reuse-cmdline
240                     Use  the  command  line  from  the running system. When a
241                     panic kernel is loaded, it strips the crashkernel parame‐
242                     ter  automatically.  The  BOOT_IMAGE  parameter  is  also
243                     stripped.
244
245              --module=mod arg1 arg2 ...
246                     Load module mod with command-line arguments arg1 arg2 ...
247                     This parameter can be specified multiple times.
248
249

ARCHITECTURE OPTIONS

251       --console-serial
252              Enable the serial console.
253
254       --console-vga
255              Enable the VGA console.
256
257       --elf32-core-headers
258              Prepare core headers in ELF32 format.
259
260       --elf64-core-headers
261              Prepare core headers in ELF64 format.
262
263       --reset-vga
264              Attempt to reset a standard VGA device.
265
266       --serial=port
267              Specify the serial port for debug output.
268
269       --serial-baud=baud_rate
270              Specify the baud rate of the serial port.
271
272
273
274Linux                             April 2006                          kexec(8)
Impressum