1IPMCTL-SHOW-ERROR-LOG(1) ipmctl IPMCTL-SHOW-ERROR-LOG(1)
2
3
4
6 ipmctl-show-error-log - Shows thermal or media errors on the specified
7 PMem modules
8
10 ipmctl show [OPTIONS] -error (Thermal|Media) [TARGETS] [PROPERTIES]
11
13 Shows thermal or media errors on the specified PMem modules.
14
16 -a, -all
17 Shows all attributes.
18
19 -h, -help
20 Displays help for the command.
21
22 -ddrt
23 Used to specify DDRT as the desired transport protocol for the
24 current invocation of ipmctl.
25
26 -smbus
27 Used to specify SMBUS as the desired transport protocol for the
28 current invocation of ipmctl.
29
30 Note
31 The -ddrt and -smbus options are mutually exclusive and may not be
32 used together.
33
34 -lpmb
35 Used to specify large transport payload size for the current
36 invocation of ipmctl.
37
38 -spmb
39 Used to specify small transport payload size for the current
40 invocation of ipmctl.
41
42 Note
43 The -lpmb and -spmb options are mutually exclusive and may not be
44 used together.
45
46 -o (text|nvmxml), -output (text|nvmxml)
47 Changes the output format. One of: "text" (default) or "nvmxml".
48
50 -dimm [DimmIDs]
51 Filter output to specific PMem modules by optionally supplying one
52 or more comma-separated PMem module identifiers. The default is to
53 include all manageable PMem modules.
54
56 SequenceNumber
57 Error log entries are stored with a sequence number starting with 1
58 and rolling over back to 1 after 65535. Limit the error log entries
59 returned by providing a sequence number. Only errors with a
60 sequence number equal to or higher than provided will be returned.
61 The default is 1.
62
63 Level
64 Severity level of errors to be fetched. One of:
65
66 · "High": High severity errors (Default)
67
68 · "Low": Low severity errors
69
70 Count
71 Max number of error entries to be fetched and printed. The default
72 is 8 for media errors and 16 for thermal errors.
73
75 Show all high thermal error log entries
76
77 ipmctl show -error Thermal Level=High
78
79 Show all low media error log entries
80
81 ipmctl show -error Media Level=Low
82
84 To successfully execute this command, the specified PMem modules must
85 be manageable by the host software. In addition, for PMem modules with
86 firmware version 2.3 and above, errors due to AIT operations are no
87 longer exposed.
88
90 Prints errors of the specified type for the specified PMem modules. If
91 no errors are found, the following message will be printed:
92
93 No errors found on PMem module (DimmID)
94
96 DimmID | System Timestamp | Error Type
97 =============================================================
98 0x0001 | 01/01/1970 00:00:20 | 0x04 - Locked/Illegal Access
99 0x0001 | 01/01/1970 00:00:21 | 0x04 - Locked/Illegal Access
100 Show error executed successfully
101
102 Media Error occurred on Dimm (DimmID):
103 System Timestamp : 1527266471
104 DPA : 0x000014c0
105 PDA : 0x00000600
106 Range : 4B
107 Error Type : 4 - Locked/Illegal Access
108 Error Flags : DPA Valid
109 Transaction Type : 11 - CSR Write
110 Sequence Number : 2
111
112
113
114ipmctl 2020-05-01 IPMCTL-SHOW-ERROR-LOG(1)