1mcelog_selinux(8)            SELinux Policy mcelog           mcelog_selinux(8)
2
3
4

NAME

6       mcelog_selinux  -  Security  Enhanced  Linux Policy for the mcelog pro‐
7       cesses
8

DESCRIPTION

10       Security-Enhanced Linux  secures  the  mcelog  processes  via  flexible
11       mandatory access control.
12
13       The  mcelog  processes  execute with the mcelog_t SELinux type. You can
14       check if you have these processes running by executing the  ps  command
15       with the -Z qualifier.
16
17       For example:
18
19       ps -eZ | grep mcelog_t
20
21
22

ENTRYPOINTS

24       The  mcelog_t  SELinux  type  can be entered via the mcelog_exec_t file
25       type.
26
27       The default entrypoint paths for the mcelog_t domain are the following:
28
29       /usr/sbin/mcelog
30

PROCESS TYPES

32       SELinux defines process types (domains) for each process running on the
33       system
34
35       You can see the context of a process using the -Z option to ps
36
37       Policy  governs  the  access confined processes have to files.  SELinux
38       mcelog policy is very flexible allowing users  to  setup  their  mcelog
39       processes in as secure a method as possible.
40
41       The following process types are defined for mcelog:
42
43       mcelog_t
44
45       Note:  semanage  permissive -a mcelog_t can be used to make the process
46       type mcelog_t permissive. SELinux does not deny  access  to  permissive
47       process  types, but the AVC (SELinux denials) messages are still gener‐
48       ated.
49
50

BOOLEANS

52       SELinux policy is customizable based on least access required.   mcelog
53       policy is extremely flexible and has several booleans that allow you to
54       manipulate the policy and run mcelog with the tightest access possible.
55
56
57
58       If you want to determine whether mcelog supports client mode, you  must
59       turn on the mcelog_client boolean. Disabled by default.
60
61       setsebool -P mcelog_client 1
62
63
64
65       If  you want to determine whether mcelog can use all the user ttys, you
66       must turn on the mcelog_foreground boolean. Disabled by default.
67
68       setsebool -P mcelog_foreground 1
69
70
71
72       If you want to allow all domains to execute in fips_mode, you must turn
73       on the fips_mode boolean. Enabled by default.
74
75       setsebool -P fips_mode 1
76
77
78
79       If  you  want  to  allow  system  to run with NIS, you must turn on the
80       nis_enabled boolean. Disabled by default.
81
82       setsebool -P nis_enabled 1
83
84
85

MANAGED FILES

87       The SELinux process type mcelog_t can manage  files  labeled  with  the
88       following file types.  The paths listed are the default paths for these
89       file types.  Note the processes UID still need to have DAC permissions.
90
91       cluster_conf_t
92
93            /etc/cluster(/.*)?
94
95       cluster_var_lib_t
96
97            /var/lib/pcsd(/.*)?
98            /var/lib/cluster(/.*)?
99            /var/lib/openais(/.*)?
100            /var/lib/pengine(/.*)?
101            /var/lib/corosync(/.*)?
102            /usr/lib/heartbeat(/.*)?
103            /var/lib/heartbeat(/.*)?
104            /var/lib/pacemaker(/.*)?
105
106       cluster_var_run_t
107
108            /var/run/crm(/.*)?
109            /var/run/cman_.*
110            /var/run/rsctmp(/.*)?
111            /var/run/aisexec.*
112            /var/run/heartbeat(/.*)?
113            /var/run/corosync-qnetd(/.*)?
114            /var/run/corosync-qdevice(/.*)?
115            /var/run/corosync.pid
116            /var/run/cpglockd.pid
117            /var/run/rgmanager.pid
118            /var/run/cluster/rgmanager.sk
119
120       mcelog_var_run_t
121
122            /var/run/mcelog.*
123
124       root_t
125
126            /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
127            /
128            /initrd
129
130       sysfs_t
131
132            /sys(/.*)?
133
134

FILE CONTEXTS

136       SELinux requires files to have an extended attribute to define the file
137       type.
138
139       You can see the context of a file using the -Z option to ls
140
141       Policy  governs  the  access  confined  processes  have to these files.
142       SELinux mcelog policy is very flexible allowing users  to  setup  their
143       mcelog processes in as secure a method as possible.
144
145       STANDARD FILE CONTEXT
146
147       SELinux defines the file context types for the mcelog, if you wanted to
148       store files with these types in a diffent paths, you  need  to  execute
149       the  semanage  command  to  sepecify  alternate  labeling  and then use
150       restorecon to put the labels on disk.
151
152       semanage fcontext -a -t mcelog_var_run_t '/srv/mymcelog_content(/.*)?'
153       restorecon -R -v /srv/mymcelog_content
154
155       Note: SELinux often uses regular expressions  to  specify  labels  that
156       match multiple files.
157
158       The following file types are defined for mcelog:
159
160
161
162       mcelog_etc_t
163
164       -  Set  files  with  the mcelog_etc_t type, if you want to store mcelog
165       files in the /etc directories.
166
167
168
169       mcelog_exec_t
170
171       - Set files with the mcelog_exec_t type, if you want to  transition  an
172       executable to the mcelog_t domain.
173
174
175
176       mcelog_initrc_exec_t
177
178       -  Set files with the mcelog_initrc_exec_t type, if you want to transi‐
179       tion an executable to the mcelog_initrc_t domain.
180
181
182
183       mcelog_log_t
184
185       - Set files with the mcelog_log_t type, if you want to treat  the  data
186       as mcelog log data, usually stored under the /var/log directory.
187
188
189
190       mcelog_var_run_t
191
192       -  Set  files  with the mcelog_var_run_t type, if you want to store the
193       mcelog files under the /run or /var/run directory.
194
195
196
197       Note: File context can be temporarily modified with the chcon  command.
198       If  you want to permanently change the file context you need to use the
199       semanage fcontext command.  This will modify the SELinux labeling data‐
200       base.  You will need to use restorecon to apply the labels.
201
202

COMMANDS

204       semanage  fcontext  can also be used to manipulate default file context
205       mappings.
206
207       semanage permissive can also be used to manipulate  whether  or  not  a
208       process type is permissive.
209
210       semanage  module can also be used to enable/disable/install/remove pol‐
211       icy modules.
212
213       semanage boolean can also be used to manipulate the booleans
214
215
216       system-config-selinux is a GUI tool available to customize SELinux pol‐
217       icy settings.
218
219

AUTHOR

221       This manual page was auto-generated using sepolicy manpage .
222
223

SEE ALSO

225       selinux(8),  mcelog(8),  semanage(8),  restorecon(8),  chcon(1), sepol‐
226       icy(8), setsebool(8)
227
228
229
230mcelog                             21-03-26                  mcelog_selinux(8)
Impressum