1pki_tps_selinux(8)          SELinux Policy pki_tps          pki_tps_selinux(8)
2
3
4

NAME

6       pki_tps_selinux  -  Security Enhanced Linux Policy for the pki_tps pro‐
7       cesses
8

DESCRIPTION

10       Security-Enhanced Linux secures  the  pki_tps  processes  via  flexible
11       mandatory access control.
12
13       The  pki_tps processes execute with the pki_tps_t SELinux type. You can
14       check if you have these processes running by executing the  ps  command
15       with the -Z qualifier.
16
17       For example:
18
19       ps -eZ | grep pki_tps_t
20
21
22

ENTRYPOINTS

24       The  pki_tps_t  SELinux type can be entered via the pki_tps_exec_t file
25       type.
26
27       The default entrypoint paths for the pki_tps_t domain are  the  follow‐
28       ing:
29
30       /var/lib/pki-tps/pki-tps
31

PROCESS TYPES

33       SELinux defines process types (domains) for each process running on the
34       system
35
36       You can see the context of a process using the -Z option to ps
37
38       Policy governs the access confined processes have  to  files.   SELinux
39       pki_tps  policy  is very flexible allowing users to setup their pki_tps
40       processes in as secure a method as possible.
41
42       The following process types are defined for pki_tps:
43
44       pki_tps_t
45
46       Note: semanage permissive -a pki_tps_t can be used to make the  process
47       type  pki_tps_t  permissive. SELinux does not deny access to permissive
48       process types, but the AVC (SELinux denials) messages are still  gener‐
49       ated.
50
51

BOOLEANS

53       SELinux policy is customizable based on least access required.  pki_tps
54       policy is extremely flexible and has several booleans that allow you to
55       manipulate  the  policy and run pki_tps with the tightest access possi‐
56       ble.
57
58
59
60       If you want to allow all domains to execute in fips_mode, you must turn
61       on the fips_mode boolean. Enabled by default.
62
63       setsebool -P fips_mode 1
64
65
66

PORT TYPES

68       SELinux defines port types to represent TCP and UDP ports.
69
70       You  can  see  the  types associated with a port by using the following
71       command:
72
73       semanage port -l
74
75
76       Policy governs the access  confined  processes  have  to  these  ports.
77       SELinux  pki_tps  policy is very flexible allowing users to setup their
78       pki_tps processes in as secure a method as possible.
79
80       The following port types are defined for pki_tps:
81
82
83       pki_tps_port_t
84
85
86
87       Default Defined Ports:
88                 tcp 7888-7889
89

MANAGED FILES

91       The SELinux process type pki_tps_t can manage files  labeled  with  the
92       following file types.  The paths listed are the default paths for these
93       file types.  Note the processes UID still need to have DAC permissions.
94
95       cluster_conf_t
96
97            /etc/cluster(/.*)?
98
99       cluster_var_lib_t
100
101            /var/lib/pcsd(/.*)?
102            /var/lib/cluster(/.*)?
103            /var/lib/openais(/.*)?
104            /var/lib/pengine(/.*)?
105            /var/lib/corosync(/.*)?
106            /usr/lib/heartbeat(/.*)?
107            /var/lib/heartbeat(/.*)?
108            /var/lib/pacemaker(/.*)?
109
110       cluster_var_run_t
111
112            /var/run/crm(/.*)?
113            /var/run/cman_.*
114            /var/run/rsctmp(/.*)?
115            /var/run/aisexec.*
116            /var/run/heartbeat(/.*)?
117            /var/run/pcsd-ruby.socket
118            /var/run/corosync-qnetd(/.*)?
119            /var/run/corosync-qdevice(/.*)?
120            /var/run/corosync.pid
121            /var/run/cpglockd.pid
122            /var/run/rgmanager.pid
123            /var/run/cluster/rgmanager.sk
124
125       krb5_host_rcache_t
126
127            /var/tmp/krb5_0.rcache2
128            /var/cache/krb5rcache(/.*)?
129            /var/tmp/nfs_0
130            /var/tmp/DNS_25
131            /var/tmp/host_0
132            /var/tmp/imap_0
133            /var/tmp/HTTP_23
134            /var/tmp/HTTP_48
135            /var/tmp/ldap_55
136            /var/tmp/ldap_487
137            /var/tmp/ldapmap1_0
138
139       pki_common_t
140
141            /opt/nfast(/.*)?
142
143       pki_tps_etc_rw_t
144
145            /etc/pki-tps(/.*)?
146            /etc/sysconfig/pki/tps(/.*)?
147
148       pki_tps_lock_t
149
150
151       pki_tps_log_t
152
153            /var/log/pki-tps(/.*)?
154
155       pki_tps_tmp_t
156
157
158       pki_tps_var_lib_t
159
160            /var/lib/pki-tps(/.*)?
161
162       pki_tps_var_run_t
163
164            /var/run/pki/tps(/.*)?
165
166       root_t
167
168            /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
169            /
170            /initrd
171
172

FILE CONTEXTS

174       SELinux requires files to have an extended attribute to define the file
175       type.
176
177       You can see the context of a file using the -Z option to ls
178
179       Policy  governs  the  access  confined  processes  have to these files.
180       SELinux pki_tps policy is very flexible allowing users to  setup  their
181       pki_tps processes in as secure a method as possible.
182
183       EQUIVALENCE DIRECTORIES
184
185
186       pki_tps  policy  stores data with multiple different file context types
187       under the /var/lib/pki-tps directory.  If you would like to  store  the
188       data  in a different directory you can use the semanage command to cre‐
189       ate an equivalence mapping.  If you wanted to store this data under the
190       /srv directory you would execute the following command:
191
192       semanage fcontext -a -e /var/lib/pki-tps /srv/pki-tps
193       restorecon -R -v /srv/pki-tps
194
195       STANDARD FILE CONTEXT
196
197       SELinux  defines  the file context types for the pki_tps, if you wanted
198       to store files with these types in a diffent paths, you need to execute
199       the  semanage  command  to sepecify alternate labeling and then use re‐
200       storecon to put the labels on disk.
201
202       semanage fcontext -a -t pki_tps_tmp_t '/srv/mypki_tps_content(/.*)?'
203       restorecon -R -v /srv/mypki_tps_content
204
205       Note: SELinux often uses regular expressions  to  specify  labels  that
206       match multiple files.
207
208       The following file types are defined for pki_tps:
209
210
211
212       pki_tps_etc_rw_t
213
214       -  Set  files  with the pki_tps_etc_rw_t type, if you want to treat the
215       files as pki tps etc read/write content.
216
217
218       Paths:
219            /etc/pki-tps(/.*)?, /etc/sysconfig/pki/tps(/.*)?
220
221
222       pki_tps_exec_t
223
224       - Set files with the pki_tps_exec_t type, if you want to transition  an
225       executable to the pki_tps_t domain.
226
227
228
229       pki_tps_lock_t
230
231       -  Set  files  with  the  pki_tps_lock_t type, if you want to treat the
232       files as pki tps lock data, stored under the /var/lock directory
233
234
235
236       pki_tps_log_t
237
238       - Set files with the pki_tps_log_t type, if you want to treat the  data
239       as pki tps log data, usually stored under the /var/log directory.
240
241
242
243       pki_tps_script_exec_t
244
245       - Set files with the pki_tps_script_exec_t type, if you want to transi‐
246       tion an executable to the pki_tps_script_t domain.
247
248
249
250       pki_tps_tmp_t
251
252       - Set files with the pki_tps_tmp_t type, if you want to store  pki  tps
253       temporary files in the /tmp directories.
254
255
256
257       pki_tps_tomcat_exec_t
258
259       - Set files with the pki_tps_tomcat_exec_t type, if you want to transi‐
260       tion an executable to the pki_tps_tomcat_t domain.
261
262
263
264       pki_tps_var_lib_t
265
266       - Set files with the pki_tps_var_lib_t type, if you want to  store  the
267       pki tps files under the /var/lib directory.
268
269
270
271       pki_tps_var_run_t
272
273       -  Set  files with the pki_tps_var_run_t type, if you want to store the
274       pki tps files under the /run or /var/run directory.
275
276
277
278       Note: File context can be temporarily modified with the chcon  command.
279       If  you want to permanently change the file context you need to use the
280       semanage fcontext command.  This will modify the SELinux labeling data‐
281       base.  You will need to use restorecon to apply the labels.
282
283

COMMANDS

285       semanage  fcontext  can also be used to manipulate default file context
286       mappings.
287
288       semanage permissive can also be used to manipulate  whether  or  not  a
289       process type is permissive.
290
291       semanage  module can also be used to enable/disable/install/remove pol‐
292       icy modules.
293
294       semanage port can also be used to manipulate the port definitions
295
296       semanage boolean can also be used to manipulate the booleans
297
298
299       system-config-selinux is a GUI tool available to customize SELinux pol‐
300       icy settings.
301
302

AUTHOR

304       This manual page was auto-generated using sepolicy manpage .
305
306

SEE ALSO

308       selinux(8),  pki_tps(8),  semanage(8),  restorecon(8), chcon(1), sepol‐
309       icy(8), setsebool(8)
310
311
312
313pki_tps                            21-06-09                 pki_tps_selinux(8)
Impressum