1firstboot_selinux(8)       SELinux Policy firstboot       firstboot_selinux(8)
2
3
4

NAME

6       firstboot_selinux  -  Security  Enhanced Linux Policy for the firstboot
7       processes
8

DESCRIPTION

10       Security-Enhanced Linux secures the firstboot  processes  via  flexible
11       mandatory access control.
12
13       The  firstboot processes execute with the firstboot_t SELinux type. You
14       can check if you have these processes running by executing the ps  com‐
15       mand with the -Z qualifier.
16
17       For example:
18
19       ps -eZ | grep firstboot_t
20
21
22

ENTRYPOINTS

24       The  firstboot_t  SELinux  type can be entered via the firstboot_exec_t
25       file type.
26
27       The default entrypoint paths for the firstboot_t domain are the follow‐
28       ing:
29
30       /usr/sbin/firstboot, /usr/share/firstboot/firstboot.py
31

PROCESS TYPES

33       SELinux defines process types (domains) for each process running on the
34       system
35
36       You can see the context of a process using the -Z option to ps
37
38       Policy governs the access confined processes have  to  files.   SELinux
39       firstboot  policy is very flexible allowing users to setup their first‐
40       boot processes in as secure a method as possible.
41
42       The following process types are defined for firstboot:
43
44       firstboot_t
45
46       Note: semanage permissive -a  firstboot_t  can  be  used  to  make  the
47       process  type  firstboot_t  permissive. SELinux does not deny access to
48       permissive process types, but the AVC (SELinux  denials)  messages  are
49       still generated.
50
51

BOOLEANS

53       SELinux  policy is customizable based on least access required.  first‐
54       boot policy is extremely flexible and has several booleans  that  allow
55       you to manipulate the policy and run firstboot with the tightest access
56       possible.
57
58
59
60       If you want to deny user domains applications to map a memory region as
61       both  executable  and  writable,  this  is dangerous and the executable
62       should be reported in bugzilla, you must turn on the deny_execmem bool‐
63       ean. Enabled by default.
64
65       setsebool -P deny_execmem 1
66
67
68
69       If  you  want  to control the ability to mmap a low area of the address
70       space, as configured by /proc/sys/vm/mmap_min_addr, you  must  turn  on
71       the mmap_low_allowed boolean. Disabled by default.
72
73       setsebool -P mmap_low_allowed 1
74
75
76
77       If  you want to disable kernel module loading, you must turn on the se‐
78       cure_mode_insmod boolean. Enabled by default.
79
80       setsebool -P secure_mode_insmod 1
81
82
83
84       If you want to allow unconfined executables to make their  heap  memory
85       executable.   Doing  this  is  a  really bad idea. Probably indicates a
86       badly coded executable, but could indicate an attack.  This  executable
87       should  be  reported  in bugzilla, you must turn on the selinuxuser_ex‐
88       echeap boolean. Disabled by default.
89
90       setsebool -P selinuxuser_execheap 1
91
92
93
94       If you want to allow unconfined executables to make  their  stack  exe‐
95       cutable.   This  should  never, ever be necessary. Probably indicates a
96       badly coded executable, but could indicate an attack.  This  executable
97       should  be reported in bugzilla, you must turn on the selinuxuser_exec‐
98       stack boolean. Enabled by default.
99
100       setsebool -P selinuxuser_execstack 1
101
102
103

MANAGED FILES

105       The SELinux process type firstboot_t can manage files labeled with  the
106       following file types.  The paths listed are the default paths for these
107       file types.  Note the processes UID still need to have DAC permissions.
108
109       file_type
110
111            all files on the system
112
113

FILE CONTEXTS

115       SELinux requires files to have an extended attribute to define the file
116       type.
117
118       You can see the context of a file using the -Z option to ls
119
120       Policy  governs  the  access  confined  processes  have to these files.
121       SELinux firstboot policy is very flexible allowing users to setup their
122       firstboot processes in as secure a method as possible.
123
124       STANDARD FILE CONTEXT
125
126       SELinux defines the file context types for the firstboot, if you wanted
127       to store files with these types in a diffent paths, you need to execute
128       the  semanage  command  to  specify alternate labeling and then use re‐
129       storecon to put the labels on disk.
130
131       semanage  fcontext   -a   -t   firstboot_etc_t   '/srv/myfirstboot_con‐
132       tent(/.*)?'
133       restorecon -R -v /srv/myfirstboot_content
134
135       Note:  SELinux  often  uses  regular expressions to specify labels that
136       match multiple files.
137
138       The following file types are defined for firstboot:
139
140
141
142       firstboot_etc_t
143
144       - Set files with the firstboot_etc_t type, if you want to store  first‐
145       boot files in the /etc directories.
146
147
148
149       firstboot_exec_t
150
151       -  Set  files with the firstboot_exec_t type, if you want to transition
152       an executable to the firstboot_t domain.
153
154
155       Paths:
156            /usr/sbin/firstboot, /usr/share/firstboot/firstboot.py
157
158
159       Note: File context can be temporarily modified with the chcon  command.
160       If  you want to permanently change the file context you need to use the
161       semanage fcontext command.  This will modify the SELinux labeling data‐
162       base.  You will need to use restorecon to apply the labels.
163
164

COMMANDS

166       semanage  fcontext  can also be used to manipulate default file context
167       mappings.
168
169       semanage permissive can also be used to manipulate  whether  or  not  a
170       process type is permissive.
171
172       semanage  module can also be used to enable/disable/install/remove pol‐
173       icy modules.
174
175       semanage boolean can also be used to manipulate the booleans
176
177
178       system-config-selinux is a GUI tool available to customize SELinux pol‐
179       icy settings.
180
181

AUTHOR

183       This manual page was auto-generated using sepolicy manpage .
184
185

SEE ALSO

187       selinux(8),  firstboot(8), semanage(8), restorecon(8), chcon(1), sepol‐
188       icy(8), setsebool(8)
189
190
191
192firstboot                          21-11-19               firstboot_selinux(8)
Impressum