1REALMD.CONF(5) File Formats REALMD.CONF(5)
2
6 realmd.conf - Tweak behavior of realmd
7
9 realmd can be tweaked by network administrators to act in specific
10 ways. This is done by placing settings in a /etc/realmd.conf. This file
11 does not exist by default. The syntax of this file is the same as an
12 INI file or Desktop Entry file. If the file is changed and realmd is
13 running realmd must be restarted to read the new values.
14 In general, settings in this file only apply at the point of joining a
16 domain or realm. Once the realm has been setup the settings have no
17 effect. You may choose to configure SSSD[1] or Winbind[2] directly.
18 Only specify the settings you wish to override in the /etc/realmd.conf
20 file. Settings not specified will be loaded from their packaged
21 defaults which can be found in /usr/lib/realmd/realmd-defaults.conf and
22 /usr/lib/realmd/realmd-distro.conf. Only override the settings below.
23 You may find other settings if you look through the realmd source code.
24 However these are not guaranteed to remain stable.
25 There are various sections in the config file. Some sections are global
27 topic sections, and are listed below. Other sections are specific to a
28 given realm. These realm specific sections should always contain the
29 domain name in lower case as their section header.
30 Examples of each setting is found below, including the header of the
32 section it should be placed in. However in the resulting file only
33 include each section once, and combine the various section setting
34 together as lines underneath the section. For example
35 [users]
37 default-home = /home/%U
38 default-shell = /bin/bash
39
41 These options should go in an [active-directory] section of the
42 /etc/realmd.conf file. Only specify the settings you wish to override.
43 default-client
45 Specify the default-client setting in order to control which client
46 software is the preferred default for use with Active Directory.
47 [active-directory]
49 default-client = sssd
50 # default-client = winbind
51 The default setting for this is sssd which uses SSSD[1] as the
53 Active Directory client. You can also specify winbind to use Samba
54 Winbind[2].
55 Some callers of realmd such as the realm command line tool allow
57 specifying which client software should be used. Others, such as
58 GNOME Control Center, simplify choose the default.
59 You can verify the preferred default client softawre by running the
61 following command. The realm with the preferred client software
62 will be listed first.
63 $ realm discover domain.example.com
65 domain.example.com
66 configured: no
67 server-software: active-directory
68 client-software: sssd
69 type: kerberos
70 realm-name: AD.THEWALTER.LAN
71 domain-name: ad.thewalter.lan
72 domain.example.com
73 configured: no
74 server-software: active-directory
75 client-software: winbind
76 type: kerberos
77 realm-name: AD.THEWALTER.LAN
78 domain-name: ad.thewalter.lan
79 use-ldaps
81 Use the ldaps port when connecting to AD where possible. In general
82 this option is not needed because realmd itself only read public
83 information from the Active Directory domain controller which is
84 available anonymously. The supported membership software products
85 will use encrypted connections protected with GSS-SPNEGO/GSSAPI
86 which offers a comparable level of security than ldaps. This option
87 is only needed if the standard LDAP port (389/tcp) is blocked by a
88 firewall and only the LDAPS port (636/tcp) is available.
89 If this option is set to yes realmd will use the ldaps port when
91 reading the rootDSE and call the adcli membership software with the
92 option --use-ldaps. The Samba base membership currently offers only
93 deprecated ways to enable ldaps. Support will be added in realmd
94 when a new way is available.
95 os-name
97 (see below)
98 os-version
100 Specify the os-name and/or os-version settings to control the
101 values that are placed in the computer account operatingSystem and
102 operatingSystemVersion attributes.
103 This is an Active Directory specific option.
105 It is also possible to use the --os-name or --os-version argument
107 of the realm command to override the default values.
108 [active-directory]
110 os-name = Gentoo Linux
111 os-version = 9.9.9.9.9
112
114 These options should go in an [service] section of the /etc/realmd.conf
115 file. Only specify the settings you wish to override.
116 automatic-install
118 Set this to no to disable automatic installation of packages via
119 package-kit.
120 [service]
122 automatic-install = no
123 # automatic-install = yes
124 legacy-samba-config
126 Set this to yes to create a Samba configuration file with
127 id-mapping options used by Samba-3.5 and earlier version.
128 [service]
130 legacy-samba-config = no
131 # legacy-samba-config = yes
132
134 These options should go in an [users] section of the /etc/realmd.conf
135 file. Only specify the settings you wish to override.
136 default-home
138 Specify the default-home setting in order to control how to set the
139 home directory for accounts that have no home directory explicitly
140 set.
141 [users]
143 default-home = /home/%U@%D
144 # default-home = /nfs/home/%D-%U
145 # default-home = /home/%D/%U
146 The default setting for this is /home/%U@%D. The %D format is
148 replaced by the domain name. The %U format is replaced by the user
149 name.
150 You can verify the home directory for a user by running the
152 following command.
153 $ getent passwd 'DOMAIN/User'
155 DOMAIN\user:*:13445:13446:Name:/home/DOMAIN/user:/bin/bash
156 Note that in the case of IPA domains, most users already have a
157 home directory configured in the domain. Therefore this
158 configuration setting may rarely show through.
159 default-shell
161 Specify the default-shell setting in order to control how to set
162 the Unix shell for accounts that have no shell explicitly set.
163 [users]
165 default-shell = /bin/bash
166 # default-shell = /bin/sh
167 The default setting for this is /bin/bash shell. The shell should
169 be a valid shell if you expect the domain users be able to log in.
170 For example it should exist in the /etc/shells file.
171 You can verify the shell for a user by running the following
173 command.
174 $ getent passwd 'DOMAIN/User'
176 DOMAIN\user:*:13445:13446:Name:/home/DOMAIN/user:/bin/bash
177 Note that in the case of IPA domains, most users already have a
178 shell configured in the domain. Therefore this configuration
179 setting may rarely show through.
180
182 These options should go in an [paths] section of the /etc/realmd.conf
183 file. Only specify the settings you wish to override.
184 krb5.conf
186 Path to the Kerberos configuration file, typically /etc/krb5.conf.
187 It can also be the path of a file included by /etc/krb5.conf, e.g.
188 /etc/krb5.conf.d/realmd_settings, if the file does not exist if
189 will be created.
190 [paths]
192 krb5.conf = /etc/krb5.conf.d/realmd_settings
193 When joining an Active Directory domain realmd will set the
195 default_realm and udp_preference_limit options in the Kerberos
196 configuration:
197 default_realm = DOMAIN.EXAMPLE.COM
199 udp_preference_limit = 0
200 The default_realm option is e.g. needed when trying to resolve
202 enterprise principals and makes it more convenient to request
203 Kerberos tickets for users of the default realm. Instead of
204 specifying the whole principal just kinit username can be used.
205 With udp_preference_limit = 0 always TCP will be used to send
207 Kerberos request to domain controller. This is useful in Active
208 Directory environments because Kerberos will typically switch to
209 TCP after initially starting with UDP because AD Kerberos tickets
210 are often larger than UDP can handle. Using TCP by default will
211 avoid those extra UDP round trips. Additionally it helps to avoid
212 issues with password changes when the DC does not reply soon enough
213 and the client will send a second UDP request. The DC might reply
214 with a reply error to the second request although the original
215 password change request was successful and the client will no know
216 if the request was successful or not. When using TCP this cannot
217 happen because the client will never send a second request but
218 waits on the connection until the server replies.
219 Please note that realmd will not remove those options while leaving
221 the domain since they are useful in general. When joining a new
222 domain realmd will of course overwrite default_realm.
223
225 These options should go in an section with the same name as the realm
226 in the /etc/realmd.conf file. For example for the domain.example.com
227 domain the section would be called [domain.example.com]. To figure out
228 the canonical name for a realm use the realm command:
229 $ realm discover --name-only DOMAIN.example.com
231 domain.example.com
232 ...
233 Only specify the settings you wish to override.
235 computer-ou
237 Specify this option to create directory computer accounts in a
238 location other than the default. This currently only works with
239 Active Directory domains.
240 [domain.example.com]
242 computer-ou = OU=Linux Computers,DC=domain,DC=example,DC=com
243 # computer-ou = OU=Linux Computers,
244 Specify the OU as an LDAP DN. It can be relative to the Root DSE,
246 or a complete LDAP DN. Obviously the OU must exist in the
247 directory.
248 It is also possible to use the --computer-ou argument of the realm
250 command to create a computer account at a specific OU.
251 computer-name
253 This option only applied to Active Directory realms. Specify this
254 option to override the default name used when creating the computer
255 account. The system's FQDN will still be saved in the dNSHostName
256 attribute.
257 [domain.example.com]
259 computer-name = SERVER01
260 Specify the name as a string of 15 or fewer characters that is a
261 valid NetBIOS computer name.
262 It is also possible to use the --computer-name argument of the
264 realm command to override the default computer account name.
265 user-principal
267 Set the user-principal to yes to create userPrincipalName attribute
268 for the computer accounts in the realm. The exact value depends on
269 the defaults of the used membership software. To have full control
270 over the value please use the --user-principal option of the realm
271 command, see realm(8) for details.
272 [domain.example.com]
274 user-principal = yes
275 automatic-join
277 This option only applies to Active Directory realms. This option is
278 off by default. In Active Directory domains, a computer account can
279 be preset with a known computer account password. This can be used
280 for automatic joins without authentication.
281 When automatic joins are used there is no mutual authentication
283 between the machine and the domain during the join process.
284 [domain.example.com]
286 automatic-join = yes
287 automatic-id-mapping
289 This option is on by default for Active Directory realms. Turn it
290 off to use UID and GID information stored in the directory (as-per
291 RFC2307) rather than automatically generating UID and GID numbers.
292 This option only makes sense for Active Directory realms.
294 [domain.example.com]
296 automatic-id-mapping = no
297 # automatic-id-mapping = yes
298 manage-system
300 This option is on by default. Normally joining a realm affects many
301 aspects of the configuration and management of the system. Turning
302 this off limits the interaction with the realm or domain to
303 authentication and identity.
304 [domain.example.com]
306 manage-system = no
307 # manage-system = yes
308 When this option is turned on realmd defaults to using domain
310 policy to control who can log into this machine. Further
311 adjustments to login policy can be made with the realm permit
312 command.
313 fully-qualified-names
315 This option is on by default. If turned off then realm user and
316 group names are not qualified their name. This may cause them to
317 conflict with local user and group names.
318 [domain.example.com]
320 fully-qualified-names = no
321 # fully-qualified-names = yes
322
324 realm(8)
325
327 Stef Walter <stef@thewalter.net>
328 Maintainer
329
331 1. SSSD
332 https://fedorahosted.org/sssd/
333 2. Winbind
335 http://www.samba.org/samba/docs/man/Samba-HOWTO-Collection/winbind.html
336realmd 07/23/2021 REALMD.CONF(5)