1nut_upsmon_selinux(8)      SELinux Policy nut_upsmon     nut_upsmon_selinux(8)
2
3
4

NAME

6       nut_upsmon_selinux  - Security Enhanced Linux Policy for the nut_upsmon
7       processes
8

DESCRIPTION

10       Security-Enhanced Linux secures the nut_upsmon processes  via  flexible
11       mandatory access control.
12
13       The  nut_upsmon  processes  execute with the nut_upsmon_t SELinux type.
14       You can check if you have these processes running by executing  the  ps
15       command with the -Z qualifier.
16
17       For example:
18
19       ps -eZ | grep nut_upsmon_t
20
21
22

ENTRYPOINTS

24       The  nut_upsmon_t SELinux type can be entered via the nut_upsmon_exec_t
25       file type.
26
27       The default entrypoint paths for the nut_upsmon_t domain are  the  fol‐
28       lowing:
29
30       /usr/sbin/upsmon
31

PROCESS TYPES

33       SELinux defines process types (domains) for each process running on the
34       system
35
36       You can see the context of a process using the -Z option to ps
37
38       Policy governs the access confined processes have  to  files.   SELinux
39       nut_upsmon  policy  is  very  flexible  allowing  users  to setup their
40       nut_upsmon processes in as secure a method as possible.
41
42       The following process types are defined for nut_upsmon:
43
44       nut_upsmon_t
45
46       Note: semanage permissive -a nut_upsmon_t  can  be  used  to  make  the
47       process  type  nut_upsmon_t permissive. SELinux does not deny access to
48       permissive process types, but the AVC (SELinux  denials)  messages  are
49       still generated.
50
51

BOOLEANS

53       SELinux policy is customizable based on least access required.  nut_up‐
54       smon policy is extremely flexible and has several booleans  that  allow
55       you  to  manipulate the policy and run nut_upsmon with the tightest ac‐
56       cess possible.
57
58
59
60       If you want to allow all domains to execute in fips_mode, you must turn
61       on the fips_mode boolean. Enabled by default.
62
63       setsebool -P fips_mode 1
64
65
66
67       If  you  want  to  allow  system  to run with NIS, you must turn on the
68       nis_enabled boolean. Disabled by default.
69
70       setsebool -P nis_enabled 1
71
72
73

MANAGED FILES

75       The SELinux process type nut_upsmon_t can manage files labeled with the
76       following file types.  The paths listed are the default paths for these
77       file types.  Note the processes UID still need to have DAC permissions.
78
79       cluster_conf_t
80
81            /etc/cluster(/.*)?
82
83       cluster_var_lib_t
84
85            /var/lib/pcsd(/.*)?
86            /var/lib/cluster(/.*)?
87            /var/lib/openais(/.*)?
88            /var/lib/pengine(/.*)?
89            /var/lib/corosync(/.*)?
90            /usr/lib/heartbeat(/.*)?
91            /var/lib/heartbeat(/.*)?
92            /var/lib/pacemaker(/.*)?
93
94       cluster_var_run_t
95
96            /var/run/crm(/.*)?
97            /var/run/cman_.*
98            /var/run/rsctmp(/.*)?
99            /var/run/aisexec.*
100            /var/run/heartbeat(/.*)?
101            /var/run/pcsd-ruby.socket
102            /var/run/corosync-qnetd(/.*)?
103            /var/run/corosync-qdevice(/.*)?
104            /var/run/corosync.pid
105            /var/run/cpglockd.pid
106            /var/run/rgmanager.pid
107            /var/run/cluster/rgmanager.sk
108
109       initrc_var_run_t
110
111            /var/run/utmp
112            /var/run/random-seed
113            /var/run/runlevel.dir
114            /var/run/setmixer_flag
115
116       krb5_host_rcache_t
117
118            /var/tmp/krb5_0.rcache2
119            /var/cache/krb5rcache(/.*)?
120            /var/tmp/nfs_0
121            /var/tmp/DNS_25
122            /var/tmp/host_0
123            /var/tmp/imap_0
124            /var/tmp/HTTP_23
125            /var/tmp/HTTP_48
126            /var/tmp/ldap_55
127            /var/tmp/ldap_487
128            /var/tmp/ldapmap1_0
129
130       nut_upsmon_tmp_t
131
132
133       nut_var_run_t
134
135            /var/run/nut(/.*)?
136
137       root_t
138
139            /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
140            /
141            /initrd
142
143       systemd_passwd_var_run_t
144
145            /var/run/systemd/ask-password(/.*)?
146            /var/run/systemd/ask-password-block(/.*)?
147
148

FILE CONTEXTS

150       SELinux requires files to have an extended attribute to define the file
151       type.
152
153       You can see the context of a file using the -Z option to ls
154
155       Policy  governs  the  access  confined  processes  have to these files.
156       SELinux nut_upsmon policy is very  flexible  allowing  users  to  setup
157       their nut_upsmon processes in as secure a method as possible.
158
159       STANDARD FILE CONTEXT
160
161       SELinux  defines  the  file  context  types  for the nut_upsmon, if you
162       wanted to store files with these types in a diffent paths, you need  to
163       execute the semanage command to specify alternate labeling and then use
164       restorecon to put the labels on disk.
165
166       semanage  fcontext  -a  -t   nut_upsmon_tmp_t   '/srv/mynut_upsmon_con‐
167       tent(/.*)?'
168       restorecon -R -v /srv/mynut_upsmon_content
169
170       Note:  SELinux  often  uses  regular expressions to specify labels that
171       match multiple files.
172
173       The following file types are defined for nut_upsmon:
174
175
176
177       nut_upsmon_exec_t
178
179       - Set files with the nut_upsmon_exec_t type, if you want to  transition
180       an executable to the nut_upsmon_t domain.
181
182
183
184       nut_upsmon_tmp_t
185
186       -  Set  files  with the nut_upsmon_tmp_t type, if you want to store nut
187       upsmon temporary files in the /tmp directories.
188
189
190
191       Note: File context can be temporarily modified with the chcon  command.
192       If  you want to permanently change the file context you need to use the
193       semanage fcontext command.  This will modify the SELinux labeling data‐
194       base.  You will need to use restorecon to apply the labels.
195
196

COMMANDS

198       semanage  fcontext  can also be used to manipulate default file context
199       mappings.
200
201       semanage permissive can also be used to manipulate  whether  or  not  a
202       process type is permissive.
203
204       semanage  module can also be used to enable/disable/install/remove pol‐
205       icy modules.
206
207       semanage boolean can also be used to manipulate the booleans
208
209
210       system-config-selinux is a GUI tool available to customize SELinux pol‐
211       icy settings.
212
213

AUTHOR

215       This manual page was auto-generated using sepolicy manpage .
216
217

SEE ALSO

219       selinux(8), nut_upsmon(8), semanage(8), restorecon(8), chcon(1), sepol‐
220       icy(8), setsebool(8)
221
222
223
224nut_upsmon                         23-02-03              nut_upsmon_selinux(8)
Impressum