1VOMS(8) VOMS Server VOMS(8)
2
6 voms - VOMS server
7
9 voms [-foreground] [-port port] [-backlog pnum] [-logfile file]
10 [-globusid id] [-globuspwd file] [-passfile file]
11 [-x509_cert_dir path] [-x509_cert_file file]
12 [-x509_user_cert file] [-x509_user_key file]
13 [-x509_user_proxy file] [-dbname name] [-username name]
14 [-vo name] [-timeout limit] [-test] [-conf file] [-uri uri]
15 [-version] [-code c] [-loglevel lev] [-logtype type]
16 [-logformat str] [-logdateformat str] [-debug] [-sqlloc path]
17 [-compat] [-socktimeout num] [-logmax num] [-newformat]
18 [-skipcacheck] [-help] [-usage] [-globus version]
19 [-contactstring contact] [-mysql-port port] [-mysql-socket socket]
20 [-shortfqans] [-syslog] [-base64] [-nologfile]
21
23 VOMS - Virtual Organization Membership Service.
24 For the initial setup of the server, run the voms_install_db script as
26 root.
27
29 Options may be specified indifferently with either a "-" or "--"
30 prefix. Their meaning is the following.
31 -help
33 -usage
35 These options print a list of options that the server accepts. They are
37 synonyms.
38 -foreground
40 Runs part of the server in foreground. Easier debugging.
42 -port port
44 Listens on port port. The default is 754.
46 -backlog num
48 Sets the maximum backlof for the connections. The default is 50.
50 -logfile file
52 Selects the file for logging. The default is /ver/log/voms.
54 -globusid id
56 -globuspwd file
58 These options are supported for backwards compatibility only. They have
60 no effect, and indeed do not get listed by the -help option.
61 -passfile file
63 Reads the password to access the DB from file. The default is to read
65 it from the console during server's startup.
66 -x509_cert_dir path
68 -x509_cert_file file
70 -x509_user_cert file
72 -x509_user_key file
74 -x509_user_proxy file
76 These options set the respective variables.
78 -dbname name
80 Sets the name of the DB. Default voms.
82 -username name
84 Sets the name of the user for the DB login. The default is voms.
86 -vo name
88 Sets the name of the VO that owns this server. The default is
90 unspecified.
91 -timeout limit
93 Sets the length of time that the information is valid, measured in
95 secods. The default is 86400 seconds (24 hours).
96 -test
98 Prints information about the server startup and then exits.
100 -conf file
102 Reads option from the file file. The options must be present one per
104 line in the format -option[=value] where the value part must obviously
105 be present only if it is required.
106 -uri uri
108 Defines the uri of the server that will be included in the generated
110 pseudo certificate. The default value is hostname:port
111 -version
113 Prints information about the server and then exits.
115 -code c
117 -globus version
119 These options are obsolete and only present for backwards compatibility
121 with old installations. Currently, their values are ignored. Do not
122 specify them in new installations.
123 -logtype type
125 Sets the type of messages that will be loggged. Acceptable values are:
127 • 1 - STARTUP, print startup messages.
129 • 2 - REQUEST, print messages during the request interpretation
131 phase.
132 • 4 - RESULT, print messages during the result sending phase.
134 This values can be ORed together to indicate that all the corresponding
136 types of messages are required. The default values is 255.
137 -loglevel lev
139 Sets the level of verbosity of log messages. Acceptable values are:
141 • 1 - LEV_NONE, do not log anything.
143 • 2 - LEV_ERROR, the default, logs only error conditions.
145 • 3 - LEV_WARNINGS, logs also warning messages.
147 • 4 - LEV_INFO, logs also general informational messages.
149 • 5 - LEV_DEBUG, logs also a lot of debug messages. Setting this
151 level of verbosity overwrites the value of the -logtype option to
152 255.
153 Higher values include all messages printed by lower ones, and values
155 not documented here are translated as the highest level possible,
156 LEV_DEBUG
157 -logformat str
159 Sets the format used by the loggin system according toa printf-like
161 format string with the following directives format: \%[size][char]
162 where size, if present, sets the maximum length of the field and char
163 selects the type of substitution done. Possible values are the
164 following:
165 • % - Substitutes a plain '%'.
167 • d - Substitutes the date. The date format is specified by the
169 -logdateformat option.
170 • f - Substitutes the name of the source file that logs the message.
172 • F - Substitutes the name of the function that logs the message.
174 • h - Substitutes the hostname of the machine hosting the service.
176 • l - Substitutes the line number that logs the message.
178 • m - Substitutes the message proper.
180 • p - Substitutes the process' pid.
182 • s - Substitutes the service name ("vomsd").
184 • t - Substitutes the number of the message type. (see the -logtype
186 option)
187 • T - Substitutes the name of the message type. (see the -logtype
189 option)
190 • v - Substitutes the number of the message level. (see the -loglevel
192 option)
193 • V - Substitutes the name of the message level. (see the -loglevel
195 option)
196 The default value for this options is: "%d:%h:%s(%p):%V:%T:%F
198 (%f:%l):%m"
199 -logdateformat str
201 This option sets the format used to print the date. The format is the
203 same used by the strftime(3) function, and its default value is: "%c".
204 -debug
206 This option puts the server into debug mode. This mode automatically
208 implies -loglevel 5. Also, this option hurts scalability and is not
209 suggested in a production environment
210 -sqlloc /path/file
212 This option specifies the full path for the DB access library. Please
214 note that there is no default for this option!
215 -socktimeout num
217 This option sets the amount of time, in seconds, after which the server
219 will drop an inactive connection. The default is 60 seconds.
220 -maxlog num
222 This options sets the maximum size of a log file. Please note that this
224 size is approximate, and may be exceeded by a few thousand bytes. In
225 any case, when the specified amount is surpassed, logfiles are rotated.
226 The default is 10Mb
227 -newformat
229 This forces the server to generate ACs in the new (correct) format.
231 This is meant as a compatibility feature to ease migration while the
232 servers upgrade to the new version.
233 -skipcacheck
235 This option, if specified, forces voms to drop some of the checks done
237 as the authorization step before AC creation. Specifically, voms will
238 no longer be capable of distinguishing to certificates with the same DN
239 but different issuers. For obvious reasons, use of this option is
240 discouraged. Note also that activating this option requires a previous
241 check by the voms server administrator that there are no certificates
242 registered in the DB which the same DN and different issuers. If there
243 are, the result of a voms-proxy-init command for one of those users
244 will be unpredictable.
245 -contactstring contact
247 This string specifies information on how to contact the DB server. Its
249 exact meaning depends on the DB backend used. For MySQL it is the
250 hostname of the MySQL server, and it defaults to 'localhost'. For
251 Oracle it is the contactstring of the DB. However, for oracle it is
252 better to put what whould be the argument of this string into the
253 'tnsnames.ora' file and ignore this option,
254 -mysql-port port
256 This option specified the port on which the MySQL server is listening
258 if it is different from its 3306 default. This value is ignored for
259 Oracle backends.
260 -mysql-socket socket
262 MySQL servers may be configured to allow access through a unix-level
264 socket. This option allows to specify this method of contact. However,
265 it is almost always better to contact the server through the port. This
266 option is ignored for Oracle backends.
267 -shortfqans
269 This option instructs the server to always generate FQANs in their
271 short form, i.e. without the /Role=NULL and /Capability=NULL parts.
272 Successive server version will make this behaviour the default, and
273 provide a -noshortfqans option to fallback to the longer format.
274 Specifying this option is recommended.
275 -syslog
277 This option allows log messages to be sent to syslog.
279 -base64
281 This option instructs the server to use the base64 encoding for its
283 messages, rather than the in-house encoding. This option will be made
284 the default in future versions and -nobase64 will be provided to
285 fallback to the inhouse encoding. Specifying this option is
286 recommended.
287 -nologfile
289 This option disables logging on the voms specific logfile. Please note
291 that specifying this option without at the same time specifying -syslog
292 implies that no logging will take place.
293
295 EGEE Bug Tracking Tool[1]
296
298 voms-proxy-init(1), voms-proxy-info(1), voms-proxy-destroy(1)
299 EDT Auth Home page[2]
301 CVSweb[3]
303 RPM repository[4]
305
307 Vincenzo Ciaschini <Vincenzo.Ciaschini@cnaf.infn.it>.
308 Valerio Venturi <Valerio.Venturi@cnaf.infn.it>.
310
312 Copyright (c) Members of the EGEE Collaboration. 2004. See the
313 beneficiaries list for details on the copyright holders.
314 Licensed under the Apache License, Version 2.0 (the "License"); you may
316 not use this file except in compliance with the License. You may obtain
317 a copy of the License at
318 www.apache.org/licenses/LICENSE-2.0[5]
320 Unless required by applicable law or agreed to in writing, software
322 distributed under the License is distributed on an "AS IS" BASIS,
323 WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
324 implied. See the License for the specific language governing
325 permissions and limitations under the License.
326
328 1. EGEE Bug Tracking Tool
329 https://savannah.cern.ch/projects/jra1mdw/
330 2. EDT Auth Home page
332 http://grid-auth.infn.it
333 3. CVSweb
335 http://datagrid.in2p3.fr/cgi-bin/cvsweb.cgi/Auth/voms
336 4. RPM repository
338 http://datagrid.in2p3.fr/distribution/autobuild/i386-rh7.3
339 5. www.apache.org/licenses/LICENSE-2.0
341 http://www.apache.org/licenses/LICENSE-2.0
342VOMS Server 05/03/2021 VOMS(8)