1NCREMAP(1)                  General Commands Manual                 NCREMAP(1)
2
3
4

NAME

6       ncremap - netCDF Remapper
7

SYNTAX

9       ncremap  [-3]  [-4]  [-5]  [-6]  [-7] [-a alg_typ] [--a2o ] [--add_fll]
10       [--area_dgn ] [-D dbg_lvl] [-d dst_fl] [--devnull= dvn_flg]  [--dt_sng=
11       dt_sng]   [--fl_fmt=   fmt]   [--d2f   ]  [--dpt  ]  [--dpt_fl  dpt_fl]
12       [--esmf_typ= esmf_typ] [-G grd_sng] [-g grd_fl] [-I in_drc] [-i  in_fl]
13       [-j  job_nbr]  [-L  dfl_lvl]  [-M]  [-m  map_fl]  [--mpi_nbr=  mpi_nbr]
14       [--mpi_pfx=  mpi_pfx]  [--msh_fl=   msh_fl]   [--msk_apl]   [--msk_dst=
15       msk_dst] [--msk_out= msk_out] [--msk_src= msk_src] [--mss_val= mss_val]
16       [-n nco_usr] [--nm_dst=  nm_dst]  [--nm_src=  nm_src]  [--no_cll_msr  ]
17       [--no_frm_trm]   [--no_permute]   [-O  out_drc]  [-o  output-file]  [-P
18       prc_typ] [-p par_typ] [--pdq_opt= pdq_opt] [--ppc_opt= ppc_opt] [--pre‐
19       serve=  prs_stt]  [-R rgr_opt] [--ps_nm ps_nm] [--rrg_bb_wesn= bb_wesn]
20       [--rrg_dat_glb=  dat_glb]  [--rrg_grd_glb=   grd_glb]   [--rrg_grd_rgn=
21       grd_rgn]  [--rrg_rnm_sng=  rnm_sng]  [-s  grd_src] [--sgs_frc= sgs_frc]
22       [--sgs_msk= sgs_msk] [--sgs_nrm= sgs_nrm] [--skl_fl = skl_fl]  [--stdin
23       ]  [--no_stdin  ]  [--stg_grd] [--no_stg_grd] [-T drc_tmp] [-t thr_nbr]
24       [-U] [-u unq_sfx]  [--ugrid_fl=  ugrid_fl]  [--uio]  [-V  rgr_var]  [-v
25       var_lst] [--vrb_lvl= vrb_lvl] [--version ] [--vrt_in vrt.nc] [--vrt_out
26       vrt.nc] [--vrt_ntp= vrt_ntp]  [--vrt_xtr=  vrt_xtr]  [-W  wgt_opt]  [-w
27       wgt_cmd]  [-x  xtn_lst]  [--xcl_var  ] [--xtr_nsp= xtr_nsp] [--xtr_xpn=
28       xtr_xpn] input-file(s) [ output-file]
29
30
31

DESCRIPTION

33       ncremap remaps the data in the input-file file(s) to the grid specified
34       by  (in  descending  order  of precedence) map_fl , dst_fl, grd_dst, or
35       grd_sng.  If invoked with a single input-file then the  regridded  file
36       will  be written to output-file.  If invoked with multiple input files,
37       then the regridded version of each will be written  with  its  original
38       filename to out_drc.
39
40

AUTHOR

42       NCO  manual pages written by Charlie Zender and originally formatted by
43       Brian Mays.
44
45

REPORTING BUGS

47       Report bugs to <http://sf.net/bugs/?group_id=3331>.
48
49

51       Copyright © 1995-present Charlie Zender
52       This is free software; see the source for copying conditions.  There is
53       NO  warranty;  not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR
54       PURPOSE.
55
56

SEE ALSO

58       The full documentation for NCO is maintained as a Texinfo manual called
59       the  NCO Users Guide.  Because NCO is mathematical in nature, the docu‐
60       mentation includes TeX-intensive portions not  viewable  on  character-
61       based  displays.  Hence the only complete and authoritative versions of
62       the NCO Users Guide are the PDF (recommended), DVI, and Postscript ver‐
63       sions  at <http://nco.sf.net/nco.pdf>, <http://nco.sf.net/nco.dvi>, and
64       <http://nco.sf.net/nco.ps>, respectively.  HTML and  XML  versions  are
65       available          at          <http://nco.sf.net/nco.html>         and
66       <http://nco.sf.net/nco.xml>, respectively.
67
68       If the info and NCO programs are properly installed at your  site,  the
69       command
70
71              info nco
72
73       should  give  you access to the complete manual, except for the TeX-in‐
74       tensive portions.
75
76       ncap2(1),  ncatted(1),   ncbo(1),   ncclimo(1),   nces(1),   ncecat(1),
77       ncflint(1),  ncz2psx(1), ncks(1), nco(1), ncpdq(1), ncra(1), ncrcat(1),
78       ncremap(1), ncrename(1), ncwa(1)
79
80

HOMEPAGE

82       The NCO homepage at <http://nco.sf.net> contains more information.
83
84
85
86                                                                    NCREMAP(1)
Impressum