1polipo_selinux(8)            SELinux Policy polipo           polipo_selinux(8)
2
3
4

NAME

6       polipo_selinux  -  Security  Enhanced  Linux Policy for the polipo pro‐
7       cesses
8

DESCRIPTION

10       Security-Enhanced Linux  secures  the  polipo  processes  via  flexible
11       mandatory access control.
12
13       The  polipo  processes  execute with the polipo_t SELinux type. You can
14       check if you have these processes running by executing the  ps  command
15       with the -Z qualifier.
16
17       For example:
18
19       ps -eZ | grep polipo_t
20
21
22

ENTRYPOINTS

24       The  polipo_t  SELinux  type  can be entered via the polipo_exec_t file
25       type.
26
27       The default entrypoint paths for the polipo_t domain are the following:
28
29       /usr/bin/polipo
30

PROCESS TYPES

32       SELinux defines process types (domains) for each process running on the
33       system
34
35       You can see the context of a process using the -Z option to ps
36
37       Policy  governs  the  access confined processes have to files.  SELinux
38       polipo policy is very flexible allowing users  to  setup  their  polipo
39       processes in as secure a method as possible.
40
41       The following process types are defined for polipo:
42
43       polipo_t, polipo_session_t
44
45       Note:  semanage  permissive -a polipo_t can be used to make the process
46       type polipo_t permissive. SELinux does not deny  access  to  permissive
47       process  types, but the AVC (SELinux denials) messages are still gener‐
48       ated.
49
50

BOOLEANS

52       SELinux policy is customizable based on least access required.   polipo
53       policy is extremely flexible and has several booleans that allow you to
54       manipulate the policy and run polipo with the tightest access possible.
55
56
57
58       If you want to allow polipo to connect to all ports >  1023,  you  must
59       turn on the polipo_connect_all_unreserved boolean. Disabled by default.
60
61       setsebool -P polipo_connect_all_unreserved 1
62
63
64
65       If  you  want to determine whether polipo can access cifs file systems,
66       you must turn on the polipo_use_cifs boolean. Disabled by default.
67
68       setsebool -P polipo_use_cifs 1
69
70
71
72       If you want to determine whether Polipo can access  nfs  file  systems,
73       you must turn on the polipo_use_nfs boolean. Disabled by default.
74
75       setsebool -P polipo_use_nfs 1
76
77
78
79       If  you  want  to  dontaudit all daemons scheduling requests (setsched,
80       sys_nice), you must turn on the  daemons_dontaudit_scheduling  boolean.
81       Enabled by default.
82
83       setsebool -P daemons_dontaudit_scheduling 1
84
85
86
87       If you want to allow all domains to execute in fips_mode, you must turn
88       on the fips_mode boolean. Enabled by default.
89
90       setsebool -P fips_mode 1
91
92
93
94       If you want to allow system to run with  NIS,  you  must  turn  on  the
95       nis_enabled boolean. Disabled by default.
96
97       setsebool -P nis_enabled 1
98
99
100

MANAGED FILES

102       The  SELinux  process  type  polipo_t can manage files labeled with the
103       following file types.  The paths listed are the default paths for these
104       file types.  Note the processes UID still need to have DAC permissions.
105
106       cifs_t
107
108
109       cluster_conf_t
110
111            /etc/cluster(/.*)?
112
113       cluster_var_lib_t
114
115            /var/lib/pcsd(/.*)?
116            /var/lib/cluster(/.*)?
117            /var/lib/openais(/.*)?
118            /var/lib/pengine(/.*)?
119            /var/lib/corosync(/.*)?
120            /usr/lib/heartbeat(/.*)?
121            /var/lib/heartbeat(/.*)?
122            /var/lib/pacemaker(/.*)?
123
124       cluster_var_run_t
125
126            /var/run/crm(/.*)?
127            /var/run/cman_.*
128            /var/run/rsctmp(/.*)?
129            /var/run/aisexec.*
130            /var/run/heartbeat(/.*)?
131            /var/run/pcsd-ruby.socket
132            /var/run/corosync-qnetd(/.*)?
133            /var/run/corosync-qdevice(/.*)?
134            /var/run/corosync.pid
135            /var/run/cpglockd.pid
136            /var/run/rgmanager.pid
137            /var/run/cluster/rgmanager.sk
138
139       krb5_host_rcache_t
140
141            /var/tmp/krb5_0.rcache2
142            /var/cache/krb5rcache(/.*)?
143            /var/tmp/nfs_0
144            /var/tmp/DNS_25
145            /var/tmp/host_0
146            /var/tmp/imap_0
147            /var/tmp/HTTP_23
148            /var/tmp/HTTP_48
149            /var/tmp/ldap_55
150            /var/tmp/ldap_487
151            /var/tmp/ldapmap1_0
152
153       nfs_t
154
155
156       polipo_cache_t
157
158            /var/cache/polipo(/.*)?
159
160       polipo_log_t
161
162            /var/log/polipo.*
163
164       polipo_pid_t
165
166            /var/run/polipo(/.*)?
167
168       root_t
169
170            /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
171            /
172            /initrd
173
174

FILE CONTEXTS

176       SELinux requires files to have an extended attribute to define the file
177       type.
178
179       You can see the context of a file using the -Z option to ls
180
181       Policy governs the access  confined  processes  have  to  these  files.
182       SELinux  polipo  policy  is very flexible allowing users to setup their
183       polipo processes in as secure a method as possible.
184
185       STANDARD FILE CONTEXT
186
187       SELinux defines the file context types for the polipo, if you wanted to
188       store  files with these types in a different paths, you need to execute
189       the semanage command to specify alternate labeling  and  then  use  re‐
190       storecon to put the labels on disk.
191
192       semanage fcontext -a -t polipo_exec_t '/srv/polipo/content(/.*)?'
193       restorecon -R -v /srv/mypolipo_content
194
195       Note:  SELinux  often  uses  regular expressions to specify labels that
196       match multiple files.
197
198       The following file types are defined for polipo:
199
200
201
202       polipo_cache_home_t
203
204       - Set files with the polipo_cache_home_t type, if  you  want  to  store
205       polipo cache files in the users home directory.
206
207
208
209       polipo_cache_t
210
211       -  Set  files  with  the  polipo_cache_t type, if you want to store the
212       files under the /var/cache directory.
213
214
215
216       polipo_config_home_t
217
218       - Set files with the polipo_config_home_t type, if you  want  to  store
219       polipo config files in the users home directory.
220
221
222
223       polipo_etc_t
224
225       -  Set  files  with  the polipo_etc_t type, if you want to store polipo
226       files in the /etc directories.
227
228
229
230       polipo_exec_t
231
232       - Set files with the polipo_exec_t type, if you want to  transition  an
233       executable to the polipo_t domain.
234
235
236
237       polipo_initrc_exec_t
238
239       -  Set files with the polipo_initrc_exec_t type, if you want to transi‐
240       tion an executable to the polipo_initrc_t domain.
241
242
243
244       polipo_log_t
245
246       - Set files with the polipo_log_t type, if you want to treat  the  data
247       as polipo log data, usually stored under the /var/log directory.
248
249
250
251       polipo_pid_t
252
253       - Set files with the polipo_pid_t type, if you want to store the polipo
254       files under the /run directory.
255
256
257
258       polipo_unit_file_t
259
260       - Set files with the polipo_unit_file_t type, if you want to treat  the
261       files as polipo unit content.
262
263
264
265       Note:  File context can be temporarily modified with the chcon command.
266       If you want to permanently change the file context you need to use  the
267       semanage fcontext command.  This will modify the SELinux labeling data‐
268       base.  You will need to use restorecon to apply the labels.
269
270

COMMANDS

272       semanage fcontext can also be used to manipulate default  file  context
273       mappings.
274
275       semanage  permissive  can  also  be used to manipulate whether or not a
276       process type is permissive.
277
278       semanage module can also be used to enable/disable/install/remove  pol‐
279       icy modules.
280
281       semanage boolean can also be used to manipulate the booleans
282
283
284       system-config-selinux is a GUI tool available to customize SELinux pol‐
285       icy settings.
286
287

AUTHOR

289       This manual page was auto-generated using sepolicy manpage .
290
291

SEE ALSO

293       selinux(8), polipo(8),  semanage(8),  restorecon(8),  chcon(1),  sepol‐
294       icy(8),     setsebool(8),     polipo_session_selinux(8),    polipo_ses‐
295       sion_selinux(8)
296
297
298
299polipo                             23-10-20                  polipo_selinux(8)
Impressum