1DUNE-EXEC(1) Dune Manual DUNE-EXEC(1)
2
6 dune-exec - Execute a command in a similar environment as if
7 installation was performed.
8
10 dune exec [OPTION]… PROG [ARGS]…
11
13 dune exec -- COMMAND should behave in the same way as if you do:
14 $ dune install
16 $ COMMAND
17 In particular if you run dune exec ocaml, you will have access to the
19 libraries defined in the workspace using your usual directives
20 (#require for instance)
21 When a leading / is present in the command (absolute path), then the
23 path is interpreted as an absolute path
24 When a / is present at any other position (relative path), then the
26 path is interpreted as relative to the build context + current working
27 directory (or the value of --root when ran outside of the project root)
28
30 --action-stderr-on-success=VAL
31 Same as --action-stdout-on-success but for the standard output for
32 error messages. A good default for large mono-repositories is
33 --action-stdout-on-success=swallow
34 --action-stderr-on-success=must-be-empty. This ensures that a
35 successful build has a "clean" empty output.
36 --action-stdout-on-success=VAL
38 Specify how to deal with the standard output of actions when they
39 succeed. Possible values are: print to just print it to Dune's
40 output, swallow to completely ignore it and must-be-empty to
41 enforce that the action printed nothing. With must-be-empty, Dune
42 will consider that the action failed if it printed something to its
43 standard output. The default is print.
44 --build-info
46 Show build information.
47 --context=CONTEXT (absent=default)
49 Run the command in this build context.
50 --error-reporting=VAL (absent=deterministic)
52 Controls when the build errors are reported. early - report errors
53 as soon as they are discovered. deterministic - report errors at
54 the end of the build in a deterministic order. twice - report each
55 error twice: once as soon as the error is discovered and then again
56 at the end of the build, in a deterministic order.
57 -f, --force
59 Force actions associated to aliases to be re-executed even if their
60 dependencies haven't changed.
61 --file-watcher=VAL (absent=automatic)
63 Mechanism to detect changes in the source. Automatic to make dune
64 run an external program to detect changes. Manual to notify dune
65 that files have changed manually."
66 --no-build
68 don't rebuild target before executing
69 --passive-watch-mode
71 Similar to [--watch], but only start a build when instructed
72 externally by an RPC.
73 --react-to-insignificant-changes
75 react to insignificant file system changes; this is only useful for
76 benchmarking dune
77 --sandbox=VAL (absent DUNE_SANDBOX env)
79 Sandboxing mode to use by default. Some actions require a certain
80 sandboxing mode, so they will ignore this setting. The allowed
81 values are: none, symlink, copy, hardlink.
82 -w, --watch
84 Instead of terminating build after completion, wait continuously
85 for file changes.
86 --wait-for-filesystem-clock
88 Dune digest file contents for better incrementally. These digests
89 are themselves cached. In some cases, Dune needs to drop some
90 digest cache entries in order for things to be reliable. This
91 option makes Dune wait for the file system clock to advance so that
92 it doesn't need to drop anything. You should probably not care
93 about this option; it is mostly useful for Dune developers to make
94 Dune tests of the digest cache more reproducible.
95
97 These options are common to all commands.
98 --always-show-command-line
100 Always show the full command lines of programs executed by dune
101 --auto-promote
103 Automatically promote files. This is similar to running dune
104 promote after the build.
105 --build-dir=FILE (absent DUNE_BUILD_DIR env)
107 Specified build directory. _build if unspecified
108 --cache=VAL (absent DUNE_CACHE env)
110 Enable or disable Dune cache (either enabled or disabled). Default
111 is `disabled'.
112 --cache-check-probability=VAL (absent DUNE_CACHE_CHECK_PROBABILITY env)
114 Check build reproducibility by re-executing randomly chosen rules
115 and comparing their results with those stored in Dune cache. Note:
116 by increasing the probability of such checks you slow down the
117 build. The default probability is zero, i.e. no rules are checked.
118 --cache-storage-mode=VAL (absent DUNE_CACHE_STORAGE_MODE env)
120 Dune cache storage mode (one of auto, hardlink or copy). Default is
121 `auto'.
122 --config-file=FILE
124 Load this configuration file instead of the default one.
125 --debug-artifact-substitution
127 Print debugging info about artifact substitution
128 --debug-backtraces
130 Always print exception backtraces.
131 --debug-cache=VAL
133 Show debug messages on cache misses for the given cache layers.
134 Value is a comma-separated list of cache layer names. All available
135 cache layers: shared,workspace-local,fs.
136 --debug-dependency-path
138 In case of error, print the dependency path from the targets on the
139 command line to the rule that failed.
140 --debug-digests
142 Explain why Dune decides to re-digest some files
143 --debug-load-dir
145 Print debugging info about directory loading
146 --debug-store-digest-preimage
148 Store digest preimage for all computed digests, so that it's
149 possible to reverse them later, for debugging. The digests are
150 stored in the shared cache (see --cache flag) as values, even if
151 cache is otherwise disabled. This should be used only for
152 debugging, since it's slow and it litters the shared cache.
153 --default-target=TARGET (absent=@@default)
155 Set the default target that when none is specified to dune build.
156 --diff-command=VAL (absent DUNE_DIFF_COMMAND env)
158 Shell command to use to diff files. Use - to disable printing the
159 diff.
160 --disable-promotion (absent DUNE_DISABLE_PROMOTION env)
162 Disable all promotion rules
163 --display=MODE
165 Control the display mode of Dune. See dune-config(5) for more
166 details. Valid values for this option are One of progress, verbose,
167 short or quiet
168 --dump-memo-graph=FILE
170 Dumps the dependency graph to a file after the build is complete
171 --dump-memo-graph-format=FORMAT (absent=gexf)
173 File format to be used when dumping dependency graph
174 --dump-memo-graph-with-timing
176 With --dump-memo-graph, will re-run each cached node in the Memo
177 graph after building and include the runtime in the output. Since
178 all nodes contain a cached value, this will measure just the
179 runtime of each node
180 --help[=FMT] (default=auto)
182 Show this help in format FMT. The value FMT must be one of auto,
183 pager, groff or plain. With auto, the format is pager or plain
184 whenever the TERM env var is dumb or undefined.
185 --ignore-promoted-rules
187 Ignore rules with (mode promote), except ones with (only ...). The
188 variable %{ignoring_promoted_rules} in dune files reflects whether
189 this option was passed or not.
190 --instrument-with=BACKENDS (absent DUNE_INSTRUMENT_WITH env)
192 "Enable instrumentation by BACKENDS. BACKENDS is a comma-separated
193 list of library names, each one of which must declare an
194 instrumentation backend.
195 -j JOBS
197 Run no more than JOBS commands simultaneously.
198 --no-buffer
200 Do not buffer the output of commands executed by dune. By default
201 dune buffers the output of subcommands, in order to prevent
202 interleaving when multiple commands are executed in parallel.
203 However, this can be an issue when debugging long running tests.
204 With --no-buffer, commands have direct access to the terminal. Note
205 that as a result their output won't be captured in the log file.
206 You should use this option in conjunction with -j 1, to avoid
207 interleaving. Additionally you should use --verbose as well, to
208 make sure that commands are printed before they are being executed.
209 --no-config
211 Do not load the configuration file
212 --no-print-directory
214 Suppress "Entering directory" messages
215 --only-packages=PACKAGES
217 Ignore stanzas referring to a package that is not in PACKAGES.
218 PACKAGES is a comma-separated list of package names. Note that this
219 has the same effect as deleting the relevant stanzas from dune
220 files. It is mostly meant for releases. During development, it is
221 likely that what you want instead is to build a particular
222 <package>.install target.
223 -p PACKAGES, --for-release-of-packages=PACKAGES (required)
225 Shorthand for --release --only-packages PACKAGE. You must use this
226 option in your <package>.opam files, in order to build only what's
227 necessary when your project contains multiple packages as well as
228 getting reproducible builds.
229 --print-metrics
231 Print out various performance metrics after every build
232 --profile=VAL (absent DUNE_PROFILE env)
234 Select the build profile, for instance dev or release. The default
235 is dev.
236 --promote-install-files[=VAL] (default=true)
238 Promote the generated <package>.install files to the source tree
239 --release
241 Put dune into a reproducible release mode. This is in fact a
242 shorthand for --root . --ignore-promoted-rules --no-config
243 --profile release --always-show-command-line
244 --promote-install-files --default-target @install
245 --require-dune-project-file. You should use this option for release
246 builds. For instance, you must use this option in your
247 <package>.opam files. Except if you already use -p, as -p implies
248 this option.
249 --require-dune-project-file[=VAL] (default=true)
251 Fail if a dune-project file is missing.
252 --root=DIR
254 Use this directory as workspace root instead of guessing it. Note
255 that this option doesn't change the interpretation of targets given
256 on the command line. It is only intended for scripts.
257 --store-orig-source-dir (absent DUNE_STORE_ORIG_SOURCE_DIR env)
259 Store original source location in dune-package metadata
260 --terminal-persistence=MODE
262 Changes how the log of build results are displayed to the console
263 between rebuilds while in --watch mode. Supported modes: preserve,
264 clear-on-rebuild, clear-on-rebuild-and-flush-history.
265 --trace-file=FILE
267 Output trace data in catapult format (compatible with
268 chrome://tracing)
269 --verbose
271 Same as --display verbose
272 --version
274 Show version information.
275 --workspace=FILE (absent DUNE_WORKSPACE env)
277 Use this specific workspace file instead of looking it up.
278 -x VAL
280 Cross-compile using this toolchain.
281
283 Use `dune COMMAND --help' for help on a single command.
284
286 exec exits with the following status:
287 0 on success.
289 123 on indiscriminate errors reported on standard error.
291 124 on command line parsing errors.
293 125 on unexpected internal errors (bugs).
295
297 These environment variables affect the execution of exec:
298 DUNE_BUILD_DIR
300 Specified build directory. _build if unspecified
301 DUNE_CACHE
303 Enable or disable Dune cache (either enabled or disabled). Default
304 is `disabled'.
305 DUNE_CACHE_CHECK_PROBABILITY
307 Check build reproducibility by re-executing randomly chosen rules
308 and comparing their results with those stored in Dune cache. Note:
309 by increasing the probability of such checks you slow down the
310 build. The default probability is zero, i.e. no rules are checked.
311 DUNE_CACHE_STORAGE_MODE
313 Dune cache storage mode (one of auto, hardlink or copy). Default is
314 `auto'.
315 DUNE_DIFF_COMMAND
317 Shell command to use to diff files. Use - to disable printing the
318 diff.
319 DUNE_DISABLE_PROMOTION
321 Disable all promotion rules
322 DUNE_INSTRUMENT_WITH
324 "Enable instrumentation by BACKENDS. BACKENDS is a comma-separated
325 list of library names, each one of which must declare an
326 instrumentation backend.
327 DUNE_PROFILE
329 Build profile. dev if unspecified or release if -p is set.
330 DUNE_SANDBOX
332 Sandboxing mode to use by default. (see --sandbox)
333 DUNE_STORE_ORIG_SOURCE_DIR
335 Store original source location in dune-package metadata
336 DUNE_WORKSPACE
338 Use this specific workspace file instead of looking it up.
339
341 Check bug reports at https://github.com/ocaml/dune/issues
342
344 dune(1)
345
347 1. Run the executable named `my_exec':
348 dune exec my_exec
350 2. Run the executable defined in `foo.ml' with the argument `arg':
352 dune exec -- ./foo.exe arg
354Dune n/a DUNE-EXEC(1)