1AS(1) GNU Development Tools AS(1)
2
6 AS - the portable GNU assembler.
7
9 as [-a[cdghlns][=file]]
10 [--alternate]
11 [--compress-debug-sections] [--nocompress-debug-sections]
12 [-D]
13 [--dump-config]
14 [--debug-prefix-map old=new]
15 [--defsym sym=val]
16 [--elf-stt-common=[no|yes]]
17 [--emulation=name]
18 [-f]
19 [-g] [--gstabs] [--gstabs+]
20 [--gdwarf-<N>] [--gdwarf-sections]
21 [--gdwarf-cie-version=VERSION]
22 [--generate-missing-build-notes=[no|yes]]
23 [--gsframe]
24 [--hash-size=N]
25 [--help] [--target-help]
26 [-I dir]
27 [-J]
28 [-K]
29 [--keep-locals]
30 [-L]
31 [--listing-lhs-width=NUM]
32 [--listing-lhs-width2=NUM]
33 [--listing-rhs-width=NUM]
34 [--listing-cont-lines=NUM]
35 [--multibyte-handling=[allow|warn|warn-sym-only]]
36 [--no-pad-sections]
37 [-o objfile] [-R]
38 [--sectname-subst]
39 [--size-check=[error|warning]]
40 [--statistics]
41 [-v] [-version] [--version]
42 [-W] [--warn] [--fatal-warnings] [-w] [-x]
43 [-Z] [@FILE]
44 [target-options]
45 [--|files ...]
46
48 Target AArch64 options:
49 [-EB|-EL]
50 [-mabi=ABI]
51 Target Alpha options:
53 [-mcpu]
54 [-mdebug | -no-mdebug]
55 [-replace | -noreplace]
56 [-relax] [-g] [-Gsize]
57 [-F] [-32addr]
58 Target ARC options:
60 [-mcpu=cpu]
61 [-mA6|-mARC600|-mARC601|-mA7|-mARC700|-mEM|-mHS]
62 [-mcode-density]
63 [-mrelax]
64 [-EB|-EL]
65 Target ARM options:
67 [-mcpu=processor[+extension...]]
68 [-march=architecture[+extension...]]
69 [-mfpu=floating-point-format]
70 [-mfloat-abi=abi]
71 [-meabi=ver]
72 [-mthumb]
73 [-EB|-EL]
74 [-mapcs-32|-mapcs-26|-mapcs-float|
75 -mapcs-reentrant]
76 [-mthumb-interwork] [-k]
77 Target Blackfin options:
79 [-mcpu=processor[-sirevision]]
80 [-mfdpic]
81 [-mno-fdpic]
82 [-mnopic]
83 Target BPF options:
85 [-EL] [-EB]
86 Target CRIS options:
88 [--underscore | --no-underscore]
89 [--pic] [-N]
90 [--emulation=criself | --emulation=crisaout]
91 [--march=v0_v10 | --march=v10 | --march=v32 |
92 --march=common_v10_v32]
93 Target C-SKY options:
95 [-march=arch] [-mcpu=cpu]
96 [-EL] [-mlittle-endian] [-EB] [-mbig-endian]
97 [-fpic] [-pic]
98 [-mljump] [-mno-ljump]
99 [-force2bsr] [-mforce2bsr] [-no-force2bsr] [-mno-force2bsr]
100 [-jsri2bsr] [-mjsri2bsr] [-no-jsri2bsr ] [-mno-jsri2bsr]
101 [-mnolrw ] [-mno-lrw]
102 [-melrw] [-mno-elrw]
103 [-mlaf ] [-mliterals-after-func]
104 [-mno-laf] [-mno-literals-after-func]
105 [-mlabr] [-mliterals-after-br]
106 [-mno-labr] [-mnoliterals-after-br]
107 [-mistack] [-mno-istack]
108 [-mhard-float] [-mmp] [-mcp] [-mcache]
109 [-msecurity] [-mtrust]
110 [-mdsp] [-medsp] [-mvdsp]
111 Target D10V options:
113 [-O]
114 Target D30V options:
116 [-O|-n|-N]
117 Target EPIPHANY options:
119 [-mepiphany|-mepiphany16]
120 Target H8/300 options:
122 [-h-tick-hex]
123 Target i386 options:
125 [--32|--x32|--64] [-n]
126 [-march=CPU[+EXTENSION...]] [-mtune=CPU]
127 Target IA-64 options:
129 [-mconstant-gp|-mauto-pic]
130 [-milp32|-milp64|-mlp64|-mp64]
131 [-mle|mbe]
132 [-mtune=itanium1|-mtune=itanium2]
133 [-munwind-check=warning|-munwind-check=error]
134 [-mhint.b=ok|-mhint.b=warning|-mhint.b=error]
135 [-x|-xexplicit] [-xauto] [-xdebug]
136 Target IP2K options:
138 [-mip2022|-mip2022ext]
139 Target M32C options:
141 [-m32c|-m16c] [-relax] [-h-tick-hex]
142 Target M32R options:
144 [--m32rx|--[no-]warn-explicit-parallel-conflicts|
145 --W[n]p]
146 Target M680X0 options:
148 [-l] [-m68000|-m68010|-m68020|...]
149 Target M68HC11 options:
151 [-m68hc11|-m68hc12|-m68hcs12|-mm9s12x|-mm9s12xg]
152 [-mshort|-mlong]
153 [-mshort-double|-mlong-double]
154 [--force-long-branches] [--short-branches]
155 [--strict-direct-mode] [--print-insn-syntax]
156 [--print-opcodes] [--generate-example]
157 Target MCORE options:
159 [-jsri2bsr] [-sifilter] [-relax]
160 [-mcpu=[210|340]]
161 Target Meta options:
163 [-mcpu=cpu] [-mfpu=cpu] [-mdsp=cpu] Target MICROBLAZE options:
164 Target MIPS options:
166 [-nocpp] [-EL] [-EB] [-O[optimization level]]
167 [-g[debug level]] [-G num] [-KPIC] [-call_shared]
168 [-non_shared] [-xgot [-mvxworks-pic]
169 [-mabi=ABI] [-32] [-n32] [-64] [-mfp32] [-mgp32]
170 [-mfp64] [-mgp64] [-mfpxx]
171 [-modd-spreg] [-mno-odd-spreg]
172 [-march=CPU] [-mtune=CPU] [-mips1] [-mips2]
173 [-mips3] [-mips4] [-mips5] [-mips32] [-mips32r2]
174 [-mips32r3] [-mips32r5] [-mips32r6] [-mips64] [-mips64r2]
175 [-mips64r3] [-mips64r5] [-mips64r6]
176 [-construct-floats] [-no-construct-floats]
177 [-mignore-branch-isa] [-mno-ignore-branch-isa]
178 [-mnan=encoding]
179 [-trap] [-no-break] [-break] [-no-trap]
180 [-mips16] [-no-mips16]
181 [-mmips16e2] [-mno-mips16e2]
182 [-mmicromips] [-mno-micromips]
183 [-msmartmips] [-mno-smartmips]
184 [-mips3d] [-no-mips3d]
185 [-mdmx] [-no-mdmx]
186 [-mdsp] [-mno-dsp]
187 [-mdspr2] [-mno-dspr2]
188 [-mdspr3] [-mno-dspr3]
189 [-mmsa] [-mno-msa]
190 [-mxpa] [-mno-xpa]
191 [-mmt] [-mno-mt]
192 [-mmcu] [-mno-mcu]
193 [-mcrc] [-mno-crc]
194 [-mginv] [-mno-ginv]
195 [-mloongson-mmi] [-mno-loongson-mmi]
196 [-mloongson-cam] [-mno-loongson-cam]
197 [-mloongson-ext] [-mno-loongson-ext]
198 [-mloongson-ext2] [-mno-loongson-ext2]
199 [-minsn32] [-mno-insn32]
200 [-mfix7000] [-mno-fix7000]
201 [-mfix-rm7000] [-mno-fix-rm7000]
202 [-mfix-vr4120] [-mno-fix-vr4120]
203 [-mfix-vr4130] [-mno-fix-vr4130]
204 [-mfix-r5900] [-mno-fix-r5900]
205 [-mdebug] [-no-mdebug]
206 [-mpdr] [-mno-pdr]
207 Target MMIX options:
209 [--fixed-special-register-names] [--globalize-symbols]
210 [--gnu-syntax] [--relax] [--no-predefined-symbols]
211 [--no-expand] [--no-merge-gregs] [-x]
212 [--linker-allocated-gregs]
213 Target Nios II options:
215 [-relax-all] [-relax-section] [-no-relax]
216 [-EB] [-EL]
217 Target NDS32 options:
219 [-EL] [-EB] [-O] [-Os] [-mcpu=cpu]
220 [-misa=isa] [-mabi=abi] [-mall-ext]
221 [-m[no-]16-bit] [-m[no-]perf-ext] [-m[no-]perf2-ext]
222 [-m[no-]string-ext] [-m[no-]dsp-ext] [-m[no-]mac] [-m[no-]div]
223 [-m[no-]audio-isa-ext] [-m[no-]fpu-sp-ext] [-m[no-]fpu-dp-ext]
224 [-m[no-]fpu-fma] [-mfpu-freg=FREG] [-mreduced-regs]
225 [-mfull-regs] [-m[no-]dx-regs] [-mpic] [-mno-relax]
226 [-mb2bb]
227 Target PDP11 options:
229 [-mpic|-mno-pic] [-mall] [-mno-extensions]
230 [-mextension|-mno-extension]
231 [-mcpu] [-mmachine]
232 Target picoJava options:
234 [-mb|-me]
235 Target PowerPC options:
237 [-a32|-a64]
238 [-mpwrx|-mpwr2|-mpwr|-m601|-mppc|-mppc32|-m603|-m604|-m403|-m405|
239 -m440|-m464|-m476|-m7400|-m7410|-m7450|-m7455|-m750cl|-mgekko|
240 -mbroadway|-mppc64|-m620|-me500|-e500x2|-me500mc|-me500mc64|-me5500|
241 -me6500|-mppc64bridge|-mbooke|-mpower4|-mpwr4|-mpower5|-mpwr5|-mpwr5x|
242 -mpower6|-mpwr6|-mpower7|-mpwr7|-mpower8|-mpwr8|-mpower9|-mpwr9-ma2|
243 -mcell|-mspe|-mspe2|-mtitan|-me300|-mcom]
244 [-many] [-maltivec|-mvsx|-mhtm|-mvle]
245 [-mregnames|-mno-regnames]
246 [-mrelocatable|-mrelocatable-lib|-K PIC] [-memb]
247 [-mlittle|-mlittle-endian|-le|-mbig|-mbig-endian|-be]
248 [-msolaris|-mno-solaris]
249 [-nops=count]
250 Target PRU options:
252 [-link-relax]
253 [-mnolink-relax]
254 [-mno-warn-regname-label]
255 Target RISC-V options:
257 [-fpic|-fPIC|-fno-pic]
258 [-march=ISA]
259 [-mabi=ABI]
260 [-mlittle-endian|-mbig-endian]
261 Target RL78 options:
263 [-mg10]
264 [-m32bit-doubles|-m64bit-doubles]
265 Target RX options:
267 [-mlittle-endian|-mbig-endian]
268 [-m32bit-doubles|-m64bit-doubles]
269 [-muse-conventional-section-names]
270 [-msmall-data-limit]
271 [-mpid]
272 [-mrelax]
273 [-mint-register=number]
274 [-mgcc-abi|-mrx-abi]
275 Target s390 options:
277 [-m31|-m64] [-mesa|-mzarch] [-march=CPU]
278 [-mregnames|-mno-regnames]
279 [-mwarn-areg-zero]
280 Target SCORE options:
282 [-EB][-EL][-FIXDD][-NWARN]
283 [-SCORE5][-SCORE5U][-SCORE7][-SCORE3]
284 [-march=score7][-march=score3]
285 [-USE_R1][-KPIC][-O0][-G num][-V]
286 Target SPARC options:
288 [-Av6|-Av7|-Av8|-Aleon|-Asparclet|-Asparclite
289 -Av8plus|-Av8plusa|-Av8plusb|-Av8plusc|-Av8plusd
290 -Av8plusv|-Av8plusm|-Av9|-Av9a|-Av9b|-Av9c
291 -Av9d|-Av9e|-Av9v|-Av9m|-Asparc|-Asparcvis
292 -Asparcvis2|-Asparcfmaf|-Asparcima|-Asparcvis3
293 -Asparcvisr|-Asparc5]
294 [-xarch=v8plus|-xarch=v8plusa]|-xarch=v8plusb|-xarch=v8plusc
295 -xarch=v8plusd|-xarch=v8plusv|-xarch=v8plusm|-xarch=v9
296 -xarch=v9a|-xarch=v9b|-xarch=v9c|-xarch=v9d|-xarch=v9e
297 -xarch=v9v|-xarch=v9m|-xarch=sparc|-xarch=sparcvis
298 -xarch=sparcvis2|-xarch=sparcfmaf|-xarch=sparcima
299 -xarch=sparcvis3|-xarch=sparcvisr|-xarch=sparc5
300 -bump]
301 [-32|-64]
302 [--enforce-aligned-data][--dcti-couples-detect]
303 Target TIC54X options:
305 [-mcpu=54[123589]|-mcpu=54[56]lp] [-mfar-mode|-mf]
306 [-merrors-to-file <filename>|-me <filename>]
307 Target TIC6X options:
309 [-march=arch] [-mbig-endian|-mlittle-endian]
310 [-mdsbt|-mno-dsbt] [-mpid=no|-mpid=near|-mpid=far]
311 [-mpic|-mno-pic]
312 Target TILE-Gx options:
314 [-m32|-m64][-EB][-EL]
315 Target Visium options:
317 [-mtune=arch]
318 Target Xtensa options:
320 [--[no-]text-section-literals] [--[no-]auto-litpools]
321 [--[no-]absolute-literals]
322 [--[no-]target-align] [--[no-]longcalls]
323 [--[no-]transform]
324 [--rename-section oldname=newname]
325 [--[no-]trampolines]
326 [--abi-windowed|--abi-call0]
327 Target Z80 options:
329 [-march=CPU[-EXT][+EXT]]
330 [-local-prefix=PREFIX]
331 [-colonless]
332 [-sdcc]
333 [-fp-s=FORMAT]
334 [-fp-d=FORMAT]
335
337 GNU as is really a family of assemblers. If you use (or have used) the
338 GNU assembler on one architecture, you should find a fairly similar
339 environment when you use it on another architecture. Each version has
340 much in common with the others, including object file formats, most
341 assembler directives (often called pseudo-ops) and assembler syntax.
342 as is primarily intended to assemble the output of the GNU C compiler
344 "gcc" for use by the linker "ld". Nevertheless, we've tried to make as
345 assemble correctly everything that other assemblers for the same
346 machine would assemble. Any exceptions are documented explicitly.
347 This doesn't mean as always uses the same syntax as another assembler
348 for the same architecture; for example, we know of several incompatible
349 versions of 680x0 assembly language syntax.
350 Each time you run as it assembles exactly one source program. The
352 source program is made up of one or more files. (The standard input is
353 also a file.)
354 You give as a command line that has zero or more input file names. The
356 input files are read (from left file name to right). A command-line
357 argument (in any position) that has no special meaning is taken to be
358 an input file name.
359 If you give as no file names it attempts to read one input file from
361 the as standard input, which is normally your terminal. You may have
362 to type ctl-D to tell as there is no more program to assemble.
363 Use -- if you need to explicitly name the standard input file in your
365 command line.
366 If the source is empty, as produces a small, empty object file.
368 as may write warnings and error messages to the standard error file
370 (usually your terminal). This should not happen when a compiler runs
371 as automatically. Warnings report an assumption made so that as could
372 keep assembling a flawed program; errors report a grave problem that
373 stops the assembly.
374 If you are invoking as via the GNU C compiler, you can use the -Wa
376 option to pass arguments through to the assembler. The assembler
377 arguments must be separated from each other (and the -Wa) by commas.
378 For example:
379 gcc -c -g -O -Wa,-alh,-L file.c
381 This passes two options to the assembler: -alh (emit a listing to
383 standard output with high-level and assembly source) and -L (retain
384 local symbols in the symbol table).
385 Usually you do not need to use this -Wa mechanism, since many compiler
387 command-line options are automatically passed to the assembler by the
388 compiler. (You can call the GNU compiler driver with the -v option to
389 see precisely what options it passes to each compilation pass,
390 including the assembler.)
391
393 @file
394 Read command-line options from file. The options read are inserted
395 in place of the original @file option. If file does not exist, or
396 cannot be read, then the option will be treated literally, and not
397 removed.
398 Options in file are separated by whitespace. A whitespace
400 character may be included in an option by surrounding the entire
401 option in either single or double quotes. Any character (including
402 a backslash) may be included by prefixing the character to be
403 included with a backslash. The file may itself contain additional
404 @file options; any such options will be processed recursively.
405 -a[cdghlmns]
407 Turn on listings, in any of a variety of ways:
408 -ac omit false conditionals
410 -ad omit debugging directives
412 -ag include general information, like as version and options passed
414 -ah include high-level source
416 -al include assembly
418 -am include macro expansions
420 -an omit forms processing
422 -as include symbols
424 =file
426 set the name of the listing file
427 You may combine these options; for example, use -aln for assembly
429 listing without forms processing. The =file option, if used, must
430 be the last one. By itself, -a defaults to -ahls.
431 --alternate
433 Begin in alternate macro mode.
434 --compress-debug-sections
436 Compress DWARF debug sections using zlib with SHF_COMPRESSED from
437 the ELF ABI. The resulting object file may not be compatible with
438 older linkers and object file utilities. Note if compression would
439 make a given section larger then it is not compressed.
440 --compress-debug-sections=none
442 --compress-debug-sections=zlib
443 --compress-debug-sections=zlib-gnu
444 --compress-debug-sections=zlib-gabi
445 --compress-debug-sections=zstd
446 These options control how DWARF debug sections are compressed.
447 --compress-debug-sections=none is equivalent to
448 --nocompress-debug-sections. --compress-debug-sections=zlib and
449 --compress-debug-sections=zlib-gabi are equivalent to
450 --compress-debug-sections. --compress-debug-sections=zlib-gnu
451 compresses DWARF debug sections using the obsoleted zlib-gnu
452 format. The debug sections are renamed to begin with .zdebug.
453 --compress-debug-sections=zstd compresses DWARF debug sections
454 using zstd. Note - if compression would actually make a section
455 larger, then it is not compressed nor renamed.
456 --nocompress-debug-sections
458 Do not compress DWARF debug sections. This is usually the default
459 for all targets except the x86/x86_64, but a configure time option
460 can be used to override this.
461 -D Enable denugging in target specific backends, if supported.
463 Otherwise ignored. Even if ignored, this option is accepted for
464 script compatibility with calls to other assemblers.
465 --debug-prefix-map old=new
467 When assembling files in directory old, record debugging
468 information describing them as in new instead.
469 --defsym sym=value
471 Define the symbol sym to be value before assembling the input file.
472 value must be an integer constant. As in C, a leading 0x indicates
473 a hexadecimal value, and a leading 0 indicates an octal value. The
474 value of the symbol can be overridden inside a source file via the
475 use of a ".set" pseudo-op.
476 --dump-config
478 Displays how the assembler is configured and then exits.
479 --elf-stt-common=no
481 --elf-stt-common=yes
482 These options control whether the ELF assembler should generate
483 common symbols with the "STT_COMMON" type. The default can be
484 controlled by a configure option --enable-elf-stt-common.
485 --emulation=name
487 If the assembler is configured to support multiple different target
488 configurations then this option can be used to select the desired
489 form.
490 -f "fast"---skip whitespace and comment preprocessing (assume source
492 is compiler output).
493 -g
495 --gen-debug
496 Generate debugging information for each assembler source line using
497 whichever debug format is preferred by the target. This currently
498 means either STABS, ECOFF or DWARF2. When the debug format is
499 DWARF then a ".debug_info" and ".debug_line" section is only
500 emitted when the assembly file doesn't generate one itself.
501 --gstabs
503 Generate stabs debugging information for each assembler line. This
504 may help debugging assembler code, if the debugger can handle it.
505 --gstabs+
507 Generate stabs debugging information for each assembler line, with
508 GNU extensions that probably only gdb can handle, and that could
509 make other debuggers crash or refuse to read your program. This
510 may help debugging assembler code. Currently the only GNU
511 extension is the location of the current working directory at
512 assembling time.
513 --gdwarf-2
515 Generate DWARF2 debugging information for each assembler line.
516 This may help debugging assembler code, if the debugger can handle
517 it. Note---this option is only supported by some targets, not all
518 of them.
519 --gdwarf-3
521 This option is the same as the --gdwarf-2 option, except that it
522 allows for the possibility of the generation of extra debug
523 information as per version 3 of the DWARF specification. Note -
524 enabling this option does not guarantee the generation of any extra
525 information, the choice to do so is on a per target basis.
526 --gdwarf-4
528 This option is the same as the --gdwarf-2 option, except that it
529 allows for the possibility of the generation of extra debug
530 information as per version 4 of the DWARF specification. Note -
531 enabling this option does not guarantee the generation of any extra
532 information, the choice to do so is on a per target basis.
533 --gdwarf-5
535 This option is the same as the --gdwarf-2 option, except that it
536 allows for the possibility of the generation of extra debug
537 information as per version 5 of the DWARF specification. Note -
538 enabling this option does not guarantee the generation of any extra
539 information, the choice to do so is on a per target basis.
540 --gdwarf-sections
542 Instead of creating a .debug_line section, create a series of
543 .debug_line.foo sections where foo is the name of the corresponding
544 code section. For example a code section called .text.func will
545 have its dwarf line number information placed into a section called
546 .debug_line.text.func. If the code section is just called .text
547 then debug line section will still be called just .debug_line
548 without any suffix.
549 --gdwarf-cie-version=version
551 Control which version of DWARF Common Information Entries (CIEs)
552 are produced. When this flag is not specificed the default is
553 version 1, though some targets can modify this default. Other
554 possible values for version are 3 or 4.
555 --generate-missing-build-notes=yes
557 --generate-missing-build-notes=no
558 These options control whether the ELF assembler should generate GNU
559 Build attribute notes if none are present in the input sources.
560 The default can be controlled by the --enable-generate-build-notes
561 configure option.
562 --gsframe
564 --gsframe
565 Create .sframe section from CFI directives.
566 --hash-size N
568 Ignored. Supported for command line compatibility with other
569 assemblers.
570 --help
572 Print a summary of the command-line options and exit.
573 --target-help
575 Print a summary of all target specific options and exit.
576 -I dir
578 Add directory dir to the search list for ".include" directives.
579 -J Don't warn about signed overflow.
581 -K Issue warnings when difference tables altered for long
583 displacements.
584 -L
586 --keep-locals
587 Keep (in the symbol table) local symbols. These symbols start with
588 system-specific local label prefixes, typically .L for ELF systems
589 or L for traditional a.out systems.
590 --listing-lhs-width=number
592 Set the maximum width, in words, of the output data column for an
593 assembler listing to number.
594 --listing-lhs-width2=number
596 Set the maximum width, in words, of the output data column for
597 continuation lines in an assembler listing to number.
598 --listing-rhs-width=number
600 Set the maximum width of an input source line, as displayed in a
601 listing, to number bytes.
602 --listing-cont-lines=number
604 Set the maximum number of lines printed in a listing for a single
605 line of input to number + 1.
606 --multibyte-handling=allow
608 --multibyte-handling=warn
609 --multibyte-handling=warn-sym-only
610 --multibyte-handling=warn_sym_only
611 Controls how the assembler handles multibyte characters in the
612 input. The default (which can be restored by using the allow
613 argument) is to allow such characters without complaint. Using the
614 warn argument will make the assembler generate a warning message
615 whenever any multibyte character is encountered. Using the warn-
616 sym-only argument will only cause a warning to be generated when a
617 symbol is defined with a name that contains multibyte characters.
618 (References to undefined symbols will not generate a warning).
619 --no-pad-sections
621 Stop the assembler for padding the ends of output sections to the
622 alignment of that section. The default is to pad the sections, but
623 this can waste space which might be needed on targets which have
624 tight memory constraints.
625 -o objfile
627 Name the object-file output from as objfile.
628 -R Fold the data section into the text section.
630 --reduce-memory-overheads
632 Ignored. Supported for compatibility with tools that apss the same
633 option to both the assembler and the linker.
634 --sectname-subst
636 Honor substitution sequences in section names.
637 --size-check=error
639 --size-check=warning
640 Issue an error or warning for invalid ELF .size directive.
641 --statistics
643 Print the maximum space (in bytes) and total time (in seconds) used
644 by assembly.
645 --strip-local-absolute
647 Remove local absolute symbols from the outgoing symbol table.
648 -v
650 -version
651 Print the as version.
652 --version
654 Print the as version and exit.
655 -W
657 --no-warn
658 Suppress warning messages.
659 --fatal-warnings
661 Treat warnings as errors.
662 --warn
664 Don't suppress warning messages or treat them as errors.
665 -w Ignored.
667 -x Ignored.
669 -Z Generate an object file even after errors.
671 -- | files ...
673 Standard input, or source files to assemble.
674 The following options are available when as is configured for the
676 64-bit mode of the ARM Architecture (AArch64).
677 -EB This option specifies that the output generated by the assembler
679 should be marked as being encoded for a big-endian processor.
680 -EL This option specifies that the output generated by the assembler
682 should be marked as being encoded for a little-endian processor.
683 -mabi=abi
685 Specify which ABI the source code uses. The recognized arguments
686 are: "ilp32" and "lp64", which decides the generated object file in
687 ELF32 and ELF64 format respectively. The default is "lp64".
688 -mcpu=processor[+extension...]
690 This option specifies the target processor. The assembler will
691 issue an error message if an attempt is made to assemble an
692 instruction which will not execute on the target processor. The
693 following processor names are recognized: "cortex-a34",
694 "cortex-a35", "cortex-a53", "cortex-a55", "cortex-a57",
695 "cortex-a65", "cortex-a65ae", "cortex-a72", "cortex-a73",
696 "cortex-a75", "cortex-a76", "cortex-a76ae", "cortex-a77",
697 "cortex-a78", "cortex-a78ae", "cortex-a78c", "cortex-a510",
698 "cortex-a710", "ares", "exynos-m1", "falkor", "neoverse-n1",
699 "neoverse-n2", "neoverse-e1", "neoverse-v1", "qdf24xx", "saphira",
700 "thunderx", "vulcan", "xgene1" "xgene2", "cortex-r82", "cortex-x1",
701 and "cortex-x2". The special name "all" may be used to allow the
702 assembler to accept instructions valid for any supported processor,
703 including all optional extensions.
704 In addition to the basic instruction set, the assembler can be told
706 to accept, or restrict, various extension mnemonics that extend the
707 processor.
708 If some implementations of a particular processor can have an
710 extension, then then those extensions are automatically enabled.
711 Consequently, you will not normally have to specify any additional
712 extensions.
713 -march=architecture[+extension...]
715 This option specifies the target architecture. The assembler will
716 issue an error message if an attempt is made to assemble an
717 instruction which will not execute on the target architecture. The
718 following architecture names are recognized: "armv8-a",
719 "armv8.1-a", "armv8.2-a", "armv8.3-a", "armv8.4-a" "armv8.5-a",
720 "armv8.6-a", "armv8.7-a", "armv8.8-a", "armv8-r", "armv9-a",
721 "armv9.1-a", "armv9.2-a", and "armv9.3-a".
722 If both -mcpu and -march are specified, the assembler will use the
724 setting for -mcpu. If neither are specified, the assembler will
725 default to -mcpu=all.
726 The architecture option can be extended with the same instruction
728 set extension options as the -mcpu option. Unlike -mcpu,
729 extensions are not always enabled by default,
730 -mverbose-error
732 This option enables verbose error messages for AArch64 gas. This
733 option is enabled by default.
734 -mno-verbose-error
736 This option disables verbose error messages in AArch64 gas.
737 The following options are available when as is configured for an Alpha
739 processor.
740 -mcpu
742 This option specifies the target processor. If an attempt is made
743 to assemble an instruction which will not execute on the target
744 processor, the assembler may either expand the instruction as a
745 macro or issue an error message. This option is equivalent to the
746 ".arch" directive.
747 The following processor names are recognized: 21064, "21064a",
749 21066, 21068, 21164, "21164a", "21164pc", 21264, "21264a",
750 "21264b", "ev4", "ev5", "lca45", "ev5", "ev56", "pca56", "ev6",
751 "ev67", "ev68". The special name "all" may be used to allow the
752 assembler to accept instructions valid for any Alpha processor.
753 In order to support existing practice in OSF/1 with respect to
755 ".arch", and existing practice within MILO (the Linux ARC
756 bootloader), the numbered processor names (e.g. 21064) enable the
757 processor-specific PALcode instructions, while the "electro-vlasic"
758 names (e.g. "ev4") do not.
759 -mdebug
761 -no-mdebug
762 Enables or disables the generation of ".mdebug" encapsulation for
763 stabs directives and procedure descriptors. The default is to
764 automatically enable ".mdebug" when the first stabs directive is
765 seen.
766 -relax
768 This option forces all relocations to be put into the object file,
769 instead of saving space and resolving some relocations at assembly
770 time. Note that this option does not propagate all symbol
771 arithmetic into the object file, because not all symbol arithmetic
772 can be represented. However, the option can still be useful in
773 specific applications.
774 -replace
776 -noreplace
777 Enables or disables the optimization of procedure calls, both at
778 assemblage and at link time. These options are only available for
779 VMS targets and "-replace" is the default. See section 1.4.1 of
780 the OpenVMS Linker Utility Manual.
781 -g This option is used when the compiler generates debug information.
783 When gcc is using mips-tfile to generate debug information for
784 ECOFF, local labels must be passed through to the object file.
785 Otherwise this option has no effect.
786 -Gsize
788 A local common symbol larger than size is placed in ".bss", while
789 smaller symbols are placed in ".sbss".
790 -F
792 -32addr
793 These options are ignored for backward compatibility.
794 The following options are available when as is configured for an ARC
796 processor.
797 -mcpu=cpu
799 This option selects the core processor variant.
800 -EB | -EL
802 Select either big-endian (-EB) or little-endian (-EL) output.
803 -mcode-density
805 Enable Code Density extension instructions.
806 The following options are available when as is configured for the ARM
808 processor family.
809 -mcpu=processor[+extension...]
811 Specify which ARM processor variant is the target.
812 -march=architecture[+extension...]
814 Specify which ARM architecture variant is used by the target.
815 -mfpu=floating-point-format
817 Select which Floating Point architecture is the target.
818 -mfloat-abi=abi
820 Select which floating point ABI is in use.
821 -mthumb
823 Enable Thumb only instruction decoding.
824 -mapcs-32 | -mapcs-26 | -mapcs-float | -mapcs-reentrant
826 Select which procedure calling convention is in use.
827 -EB | -EL
829 Select either big-endian (-EB) or little-endian (-EL) output.
830 -mthumb-interwork
832 Specify that the code has been generated with interworking between
833 Thumb and ARM code in mind.
834 -mccs
836 Turns on CodeComposer Studio assembly syntax compatibility mode.
837 -k Specify that PIC code has been generated.
839 The following options are available when as is configured for the
841 Blackfin processor family.
842 -mcpu=processor[-sirevision]
844 This option specifies the target processor. The optional
845 sirevision is not used in assembler. It's here such that GCC can
846 easily pass down its "-mcpu=" option. The assembler will issue an
847 error message if an attempt is made to assemble an instruction
848 which will not execute on the target processor. The following
849 processor names are recognized: "bf504", "bf506", "bf512", "bf514",
850 "bf516", "bf518", "bf522", "bf523", "bf524", "bf525", "bf526",
851 "bf527", "bf531", "bf532", "bf533", "bf534", "bf535" (not
852 implemented yet), "bf536", "bf537", "bf538", "bf539", "bf542",
853 "bf542m", "bf544", "bf544m", "bf547", "bf547m", "bf548", "bf548m",
854 "bf549", "bf549m", "bf561", and "bf592".
855 -mfdpic
857 Assemble for the FDPIC ABI.
858 -mno-fdpic
860 -mnopic
861 Disable -mfdpic.
862 The following options are available when as is configured for the Linux
864 kernel BPF processor family.
865 @chapter BPF Dependent Features
867 Options
869 -EB This option specifies that the assembler should emit big-endian
870 eBPF.
871 -EL This option specifies that the assembler should emit little-endian
873 eBPF.
874 Note that if no endianness option is specified in the command line, the
876 host endianness is used. See the info pages for documentation of the
877 CRIS-specific options.
878 The following options are available when as is configured for the C-SKY
880 processor family.
881 -march=archname
883 Assemble for architecture archname. The --help option lists valid
884 values for archname.
885 -mcpu=cpuname
887 Assemble for architecture cpuname. The --help option lists valid
888 values for cpuname.
889 -EL
891 -mlittle-endian
892 Generate little-endian output.
893 -EB
895 -mbig-endian
896 Generate big-endian output.
897 -fpic
899 -pic
900 Generate position-independent code.
901 -mljump
903 -mno-ljump
904 Enable/disable transformation of the short branch instructions
905 "jbf", "jbt", and "jbr" to "jmpi". This option is for V2
906 processors only. It is ignored on CK801 and CK802 targets, which
907 do not support the "jmpi" instruction, and is enabled by default
908 for other processors.
909 -mbranch-stub
911 -mno-branch-stub
912 Pass through "R_CKCORE_PCREL_IMM26BY2" relocations for "bsr"
913 instructions to the linker.
914 This option is only available for bare-metal C-SKY V2 ELF targets,
916 where it is enabled by default. It cannot be used in code that
917 will be dynamically linked against shared libraries.
918 -force2bsr
920 -mforce2bsr
921 -no-force2bsr
922 -mno-force2bsr
923 Enable/disable transformation of "jbsr" instructions to "bsr".
924 This option is always enabled (and -mno-force2bsr is ignored) for
925 CK801/CK802 targets. It is also always enabled when -mbranch-stub
926 is in effect.
927 -jsri2bsr
929 -mjsri2bsr
930 -no-jsri2bsr
931 -mno-jsri2bsr
932 Enable/disable transformation of "jsri" instructions to "bsr".
933 This option is enabled by default.
934 -mnolrw
936 -mno-lrw
937 Enable/disable transformation of "lrw" instructions into a
938 "movih"/"ori" pair.
939 -melrw
941 -mno-elrw
942 Enable/disable extended "lrw" instructions. This option is enabled
943 by default for CK800-series processors.
944 -mlaf
946 -mliterals-after-func
947 -mno-laf
948 -mno-literals-after-func
949 Enable/disable placement of literal pools after each function.
950 -mlabr
952 -mliterals-after-br
953 -mno-labr
954 -mnoliterals-after-br
955 Enable/disable placement of literal pools after unconditional
956 branches. This option is enabled by default.
957 -mistack
959 -mno-istack
960 Enable/disable interrupt stack instructions. This option is
961 enabled by default on CK801, CK802, and CK802 processors.
962 The following options explicitly enable certain optional instructions.
964 These features are also enabled implicitly by using "-mcpu=" to specify
965 a processor that supports it.
966 -mhard-float
968 Enable hard float instructions.
969 -mmp
971 Enable multiprocessor instructions.
972 -mcp
974 Enable coprocessor instructions.
975 -mcache
977 Enable cache prefetch instruction.
978 -msecurity
980 Enable C-SKY security instructions.
981 -mtrust
983 Enable C-SKY trust instructions.
984 -mdsp
986 Enable DSP instructions.
987 -medsp
989 Enable enhanced DSP instructions.
990 -mvdsp
992 Enable vector DSP instructions.
993 The following options are available when as is configured for an
995 Epiphany processor.
996 -mepiphany
998 Specifies that the both 32 and 16 bit instructions are allowed.
999 This is the default behavior.
1000 -mepiphany16
1002 Restricts the permitted instructions to just the 16 bit set.
1003 The following options are available when as is configured for an H8/300
1005 processor. @chapter H8/300 Dependent Features
1006 Options
1008 The Renesas H8/300 version of "as" has one machine-dependent option:
1009 -h-tick-hex
1011 Support H'00 style hex constants in addition to 0x00 style.
1012 -mach=name
1014 Sets the H8300 machine variant. The following machine names are
1015 recognised: "h8300h", "h8300hn", "h8300s", "h8300sn", "h8300sx" and
1016 "h8300sxn".
1017 The following options are available when as is configured for an i386
1019 processor.
1020 --32 | --x32 | --64
1022 Select the word size, either 32 bits or 64 bits. --32 implies
1023 Intel i386 architecture, while --x32 and --64 imply AMD x86-64
1024 architecture with 32-bit or 64-bit word-size respectively.
1025 These options are only available with the ELF object file format,
1027 and require that the necessary BFD support has been included (on a
1028 32-bit platform you have to add --enable-64-bit-bfd to configure
1029 enable 64-bit usage and use x86-64 as target platform).
1030 -n By default, x86 GAS replaces multiple nop instructions used for
1032 alignment within code sections with multi-byte nop instructions
1033 such as leal 0(%esi,1),%esi. This switch disables the optimization
1034 if a single byte nop (0x90) is explicitly specified as the fill
1035 byte for alignment.
1036 --divide
1038 On SVR4-derived platforms, the character / is treated as a comment
1039 character, which means that it cannot be used in expressions. The
1040 --divide option turns / into a normal character. This does not
1041 disable / at the beginning of a line starting a comment, or affect
1042 using # for starting a comment.
1043 -march=CPU[+EXTENSION...]
1045 This option specifies the target processor. The assembler will
1046 issue an error message if an attempt is made to assemble an
1047 instruction which will not execute on the target processor. The
1048 following processor names are recognized: "i8086", "i186", "i286",
1049 "i386", "i486", "i586", "i686", "pentium", "pentiumpro",
1050 "pentiumii", "pentiumiii", "pentium4", "prescott", "nocona",
1051 "core", "core2", "corei7", "iamcu", "k6", "k6_2", "athlon",
1052 "opteron", "k8", "amdfam10", "bdver1", "bdver2", "bdver3",
1053 "bdver4", "znver1", "znver2", "znver3", "znver4", "btver1",
1054 "btver2", "generic32" and "generic64".
1055 In addition to the basic instruction set, the assembler can be told
1057 to accept various extension mnemonics. For example,
1058 "-march=i686+sse4+vmx" extends i686 with sse4 and vmx. The
1059 following extensions are currently supported: 8087, 287, 387, 687,
1060 "cmov", "fxsr", "mmx", "sse", "sse2", "sse3", "sse4a", "ssse3",
1061 "sse4.1", "sse4.2", "sse4", "avx", "avx2", "adx", "rdseed",
1062 "prfchw", "smap", "mpx", "sha", "rdpid", "ptwrite", "cet", "gfni",
1063 "vaes", "vpclmulqdq", "prefetchwt1", "clflushopt", "se1", "clwb",
1064 "movdiri", "movdir64b", "enqcmd", "serialize", "tsxldtrk", "kl",
1065 "widekl", "hreset", "avx512f", "avx512cd", "avx512er", "avx512pf",
1066 "avx512vl", "avx512bw", "avx512dq", "avx512ifma", "avx512vbmi",
1067 "avx512_4fmaps", "avx512_4vnniw", "avx512_vpopcntdq",
1068 "avx512_vbmi2", "avx512_vnni", "avx512_bitalg",
1069 "avx512_vp2intersect", "tdx", "avx512_bf16", "avx_vnni",
1070 "avx512_fp16", "prefetchi", "avx_ifma", "avx_vnni_int8",
1071 "cmpccxadd", "wrmsrns", "msrlist", "avx_ne_convert", "rao_int",
1072 "amx_int8", "amx_bf16", "amx_fp16", "amx_tile", "vmx", "vmfunc",
1073 "smx", "xsave", "xsaveopt", "xsavec", "xsaves", "aes", "pclmul",
1074 "fsgsbase", "rdrnd", "f16c", "bmi2", "fma", "movbe", "ept",
1075 "lzcnt", "popcnt", "hle", "rtm", "tsx", "invpcid", "clflush",
1076 "mwaitx", "clzero", "wbnoinvd", "pconfig", "waitpkg", "uintr",
1077 "cldemote", "rdpru", "mcommit", "sev_es", "lwp", "fma4", "xop",
1078 "cx16", "syscall", "rdtscp", "3dnow", "3dnowa", "sse4a", "sse5",
1079 "snp", "invlpgb", "tlbsync", "svme" and "padlock". Note that these
1080 extension mnemonics can be prefixed with "no" to revoke the
1081 respective (and any dependent) functionality.
1082 When the ".arch" directive is used with -march, the ".arch"
1084 directive will take precedent.
1085 -mtune=CPU
1087 This option specifies a processor to optimize for. When used in
1088 conjunction with the -march option, only instructions of the
1089 processor specified by the -march option will be generated.
1090 Valid CPU values are identical to the processor list of -march=CPU.
1092 -msse2avx
1094 This option specifies that the assembler should encode SSE
1095 instructions with VEX prefix.
1096 -muse-unaligned-vector-move
1098 This option specifies that the assembler should encode aligned
1099 vector move as unaligned vector move.
1100 -msse-check=none
1102 -msse-check=warning
1103 -msse-check=error
1104 These options control if the assembler should check SSE
1105 instructions. -msse-check=none will make the assembler not to
1106 check SSE instructions, which is the default. -msse-check=warning
1107 will make the assembler issue a warning for any SSE instruction.
1108 -msse-check=error will make the assembler issue an error for any
1109 SSE instruction.
1110 -mavxscalar=128
1112 -mavxscalar=256
1113 These options control how the assembler should encode scalar AVX
1114 instructions. -mavxscalar=128 will encode scalar AVX instructions
1115 with 128bit vector length, which is the default. -mavxscalar=256
1116 will encode scalar AVX instructions with 256bit vector length.
1117 WARNING: Don't use this for production code - due to CPU errata the
1119 resulting code may not work on certain models.
1120 -mvexwig=0
1122 -mvexwig=1
1123 These options control how the assembler should encode VEX.W-ignored
1124 (WIG) VEX instructions. -mvexwig=0 will encode WIG VEX
1125 instructions with vex.w = 0, which is the default. -mvexwig=1 will
1126 encode WIG EVEX instructions with vex.w = 1.
1127 WARNING: Don't use this for production code - due to CPU errata the
1129 resulting code may not work on certain models.
1130 -mevexlig=128
1132 -mevexlig=256
1133 -mevexlig=512
1134 These options control how the assembler should encode length-
1135 ignored (LIG) EVEX instructions. -mevexlig=128 will encode LIG
1136 EVEX instructions with 128bit vector length, which is the default.
1137 -mevexlig=256 and -mevexlig=512 will encode LIG EVEX instructions
1138 with 256bit and 512bit vector length, respectively.
1139 -mevexwig=0
1141 -mevexwig=1
1142 These options control how the assembler should encode w-ignored
1143 (WIG) EVEX instructions. -mevexwig=0 will encode WIG EVEX
1144 instructions with evex.w = 0, which is the default. -mevexwig=1
1145 will encode WIG EVEX instructions with evex.w = 1.
1146 -mmnemonic=att
1148 -mmnemonic=intel
1149 This option specifies instruction mnemonic for matching
1150 instructions. The ".att_mnemonic" and ".intel_mnemonic" directives
1151 will take precedent.
1152 -msyntax=att
1154 -msyntax=intel
1155 This option specifies instruction syntax when processing
1156 instructions. The ".att_syntax" and ".intel_syntax" directives
1157 will take precedent.
1158 -mnaked-reg
1160 This option specifies that registers don't require a % prefix. The
1161 ".att_syntax" and ".intel_syntax" directives will take precedent.
1162 -madd-bnd-prefix
1164 This option forces the assembler to add BND prefix to all branches,
1165 even if such prefix was not explicitly specified in the source
1166 code.
1167 -mno-shared
1169 On ELF target, the assembler normally optimizes out non-PLT
1170 relocations against defined non-weak global branch targets with
1171 default visibility. The -mshared option tells the assembler to
1172 generate code which may go into a shared library where all non-weak
1173 global branch targets with default visibility can be preempted.
1174 The resulting code is slightly bigger. This option only affects
1175 the handling of branch instructions.
1176 -mbig-obj
1178 On PE/COFF target this option forces the use of big object file
1179 format, which allows more than 32768 sections.
1180 -momit-lock-prefix=no
1182 -momit-lock-prefix=yes
1183 These options control how the assembler should encode lock prefix.
1184 This option is intended as a workaround for processors, that fail
1185 on lock prefix. This option can only be safely used with single-
1186 core, single-thread computers -momit-lock-prefix=yes will omit all
1187 lock prefixes. -momit-lock-prefix=no will encode lock prefix as
1188 usual, which is the default.
1189 -mfence-as-lock-add=no
1191 -mfence-as-lock-add=yes
1192 These options control how the assembler should encode lfence,
1193 mfence and sfence. -mfence-as-lock-add=yes will encode lfence,
1194 mfence and sfence as lock addl $0x0, (%rsp) in 64-bit mode and lock
1195 addl $0x0, (%esp) in 32-bit mode. -mfence-as-lock-add=no will
1196 encode lfence, mfence and sfence as usual, which is the default.
1197 -mrelax-relocations=no
1199 -mrelax-relocations=yes
1200 These options control whether the assembler should generate relax
1201 relocations, R_386_GOT32X, in 32-bit mode, or R_X86_64_GOTPCRELX
1202 and R_X86_64_REX_GOTPCRELX, in 64-bit mode.
1203 -mrelax-relocations=yes will generate relax relocations.
1204 -mrelax-relocations=no will not generate relax relocations. The
1205 default can be controlled by a configure option
1206 --enable-x86-relax-relocations.
1207 -malign-branch-boundary=NUM
1209 This option controls how the assembler should align branches with
1210 segment prefixes or NOP. NUM must be a power of 2. It should be 0
1211 or no less than 16. Branches will be aligned within NUM byte
1212 boundary. -malign-branch-boundary=0, which is the default, doesn't
1213 align branches.
1214 -malign-branch=TYPE[+TYPE...]
1216 This option specifies types of branches to align. TYPE is
1217 combination of jcc, which aligns conditional jumps, fused, which
1218 aligns fused conditional jumps, jmp, which aligns unconditional
1219 jumps, call which aligns calls, ret, which aligns rets, indirect,
1220 which aligns indirect jumps and calls. The default is
1221 -malign-branch=jcc+fused+jmp.
1222 -malign-branch-prefix-size=NUM
1224 This option specifies the maximum number of prefixes on an
1225 instruction to align branches. NUM should be between 0 and 5. The
1226 default NUM is 5.
1227 -mbranches-within-32B-boundaries
1229 This option aligns conditional jumps, fused conditional jumps and
1230 unconditional jumps within 32 byte boundary with up to 5 segment
1231 prefixes on an instruction. It is equivalent to
1232 -malign-branch-boundary=32 -malign-branch=jcc+fused+jmp
1233 -malign-branch-prefix-size=5. The default doesn't align branches.
1234 -mlfence-after-load=no
1236 -mlfence-after-load=yes
1237 These options control whether the assembler should generate lfence
1238 after load instructions. -mlfence-after-load=yes will generate
1239 lfence. -mlfence-after-load=no will not generate lfence, which is
1240 the default.
1241 -mlfence-before-indirect-branch=none
1243 -mlfence-before-indirect-branch=all
1244 -mlfence-before-indirect-branch=register
1245 -mlfence-before-indirect-branch=memory
1246 These options control whether the assembler should generate lfence
1247 before indirect near branch instructions.
1248 -mlfence-before-indirect-branch=all will generate lfence before
1249 indirect near branch via register and issue a warning before
1250 indirect near branch via memory. It also implicitly sets
1251 -mlfence-before-ret=shl when there's no explicit
1252 -mlfence-before-ret=. -mlfence-before-indirect-branch=register
1253 will generate lfence before indirect near branch via register.
1254 -mlfence-before-indirect-branch=memory will issue a warning before
1255 indirect near branch via memory.
1256 -mlfence-before-indirect-branch=none will not generate lfence nor
1257 issue warning, which is the default. Note that lfence won't be
1258 generated before indirect near branch via register with
1259 -mlfence-after-load=yes since lfence will be generated after
1260 loading branch target register.
1261 -mlfence-before-ret=none
1263 -mlfence-before-ret=shl
1264 -mlfence-before-ret=or
1265 -mlfence-before-ret=yes
1266 -mlfence-before-ret=not
1267 These options control whether the assembler should generate lfence
1268 before ret. -mlfence-before-ret=or will generate generate or
1269 instruction with lfence. -mlfence-before-ret=shl/yes will generate
1270 shl instruction with lfence. -mlfence-before-ret=not will generate
1271 not instruction with lfence. -mlfence-before-ret=none will not
1272 generate lfence, which is the default.
1273 -mx86-used-note=no
1275 -mx86-used-note=yes
1276 These options control whether the assembler should generate
1277 GNU_PROPERTY_X86_ISA_1_USED and GNU_PROPERTY_X86_FEATURE_2_USED GNU
1278 property notes. The default can be controlled by the
1279 --enable-x86-used-note configure option.
1280 -mevexrcig=rne
1282 -mevexrcig=rd
1283 -mevexrcig=ru
1284 -mevexrcig=rz
1285 These options control how the assembler should encode SAE-only EVEX
1286 instructions. -mevexrcig=rne will encode RC bits of EVEX
1287 instruction with 00, which is the default. -mevexrcig=rd,
1288 -mevexrcig=ru and -mevexrcig=rz will encode SAE-only EVEX
1289 instructions with 01, 10 and 11 RC bits, respectively.
1290 -mamd64
1292 -mintel64
1293 This option specifies that the assembler should accept only AMD64
1294 or Intel64 ISA in 64-bit mode. The default is to accept common,
1295 Intel64 only and AMD64 ISAs.
1296 -O0 | -O | -O1 | -O2 | -Os
1298 Optimize instruction encoding with smaller instruction size. -O
1299 and -O1 encode 64-bit register load instructions with 64-bit
1300 immediate as 32-bit register load instructions with 31-bit or
1301 32-bits immediates, encode 64-bit register clearing instructions
1302 with 32-bit register clearing instructions, encode 256-bit/512-bit
1303 VEX/EVEX vector register clearing instructions with 128-bit VEX
1304 vector register clearing instructions, encode 128-bit/256-bit EVEX
1305 vector register load/store instructions with VEX vector register
1306 load/store instructions, and encode 128-bit/256-bit EVEX packed
1307 integer logical instructions with 128-bit/256-bit VEX packed
1308 integer logical.
1309 -O2 includes -O1 optimization plus encodes 256-bit/512-bit EVEX
1311 vector register clearing instructions with 128-bit EVEX vector
1312 register clearing instructions. In 64-bit mode VEX encoded
1313 instructions with commutative source operands will also have their
1314 source operands swapped if this allows using the 2-byte VEX prefix
1315 form instead of the 3-byte one. Certain forms of AND as well as OR
1316 with the same (register) operand specified twice will also be
1317 changed to TEST.
1318 -Os includes -O2 optimization plus encodes 16-bit, 32-bit and
1320 64-bit register tests with immediate as 8-bit register test with
1321 immediate. -O0 turns off this optimization.
1322 The following options are available when as is configured for the
1324 Ubicom IP2K series.
1325 -mip2022ext
1327 Specifies that the extended IP2022 instructions are allowed.
1328 -mip2022
1330 Restores the default behaviour, which restricts the permitted
1331 instructions to just the basic IP2022 ones.
1332 The following options are available when as is configured for the
1334 Renesas M32C and M16C processors.
1335 -m32c
1337 Assemble M32C instructions.
1338 -m16c
1340 Assemble M16C instructions (the default).
1341 -relax
1343 Enable support for link-time relaxations.
1344 -h-tick-hex
1346 Support H'00 style hex constants in addition to 0x00 style.
1347 The following options are available when as is configured for the
1349 Renesas M32R (formerly Mitsubishi M32R) series.
1350 --m32rx
1352 Specify which processor in the M32R family is the target. The
1353 default is normally the M32R, but this option changes it to the
1354 M32RX.
1355 --warn-explicit-parallel-conflicts or --Wp
1357 Produce warning messages when questionable parallel constructs are
1358 encountered.
1359 --no-warn-explicit-parallel-conflicts or --Wnp
1361 Do not produce warning messages when questionable parallel
1362 constructs are encountered.
1363 The following options are available when as is configured for the
1365 Motorola 68000 series.
1366 -l Shorten references to undefined symbols, to one word instead of
1368 two.
1369 -m68000 | -m68008 | -m68010 | -m68020 | -m68030
1371 | -m68040 | -m68060 | -m68302 | -m68331 | -m68332
1372 | -m68333 | -m68340 | -mcpu32 | -m5200
1373 Specify what processor in the 68000 family is the target. The
1374 default is normally the 68020, but this can be changed at
1375 configuration time.
1376 -m68881 | -m68882 | -mno-68881 | -mno-68882
1378 The target machine does (or does not) have a floating-point
1379 coprocessor. The default is to assume a coprocessor for 68020,
1380 68030, and cpu32. Although the basic 68000 is not compatible with
1381 the 68881, a combination of the two can be specified, since it's
1382 possible to do emulation of the coprocessor instructions with the
1383 main processor.
1384 -m68851 | -mno-68851
1386 The target machine does (or does not) have a memory-management unit
1387 coprocessor. The default is to assume an MMU for 68020 and up.
1388 The following options are available when as is configured for an Altera
1390 Nios II processor.
1391 -relax-section
1393 Replace identified out-of-range branches with PC-relative "jmp"
1394 sequences when possible. The generated code sequences are suitable
1395 for use in position-independent code, but there is a practical
1396 limit on the extended branch range because of the length of the
1397 sequences. This option is the default.
1398 -relax-all
1400 Replace branch instructions not determinable to be in range and all
1401 call instructions with "jmp" and "callr" sequences (respectively).
1402 This option generates absolute relocations against the target
1403 symbols and is not appropriate for position-independent code.
1404 -no-relax
1406 Do not replace any branches or calls.
1407 -EB Generate big-endian output.
1409 -EL Generate little-endian output. This is the default.
1411 -march=architecture
1413 This option specifies the target architecture. The assembler
1414 issues an error message if an attempt is made to assemble an
1415 instruction which will not execute on the target architecture. The
1416 following architecture names are recognized: "r1", "r2". The
1417 default is "r1".
1418 The following options are available when as is configured for a PRU
1420 processor.
1421 -mlink-relax
1423 Assume that LD would optimize LDI32 instructions by checking the
1424 upper 16 bits of the expression. If they are all zeros, then LD
1425 would shorten the LDI32 instruction to a single LDI. In such case
1426 "as" will output DIFF relocations for diff expressions.
1427 -mno-link-relax
1429 Assume that LD would not optimize LDI32 instructions. As a
1430 consequence, DIFF relocations will not be emitted.
1431 -mno-warn-regname-label
1433 Do not warn if a label name matches a register name. Usually
1434 assembler programmers will want this warning to be emitted. C
1435 compilers may want to turn this off.
1436 The following options are available when as is configured for a MIPS
1438 processor.
1439 -G num
1441 This option sets the largest size of an object that can be
1442 referenced implicitly with the "gp" register. It is only accepted
1443 for targets that use ECOFF format, such as a DECstation running
1444 Ultrix. The default value is 8.
1445 -EB Generate "big endian" format output.
1447 -EL Generate "little endian" format output.
1449 -mips1
1451 -mips2
1452 -mips3
1453 -mips4
1454 -mips5
1455 -mips32
1456 -mips32r2
1457 -mips32r3
1458 -mips32r5
1459 -mips32r6
1460 -mips64
1461 -mips64r2
1462 -mips64r3
1463 -mips64r5
1464 -mips64r6
1465 Generate code for a particular MIPS Instruction Set Architecture
1466 level. -mips1 is an alias for -march=r3000, -mips2 is an alias for
1467 -march=r6000, -mips3 is an alias for -march=r4000 and -mips4 is an
1468 alias for -march=r8000. -mips5, -mips32, -mips32r2, -mips32r3,
1469 -mips32r5, -mips32r6, -mips64, -mips64r2, -mips64r3, -mips64r5, and
1470 -mips64r6 correspond to generic MIPS V, MIPS32, MIPS32 Release 2,
1471 MIPS32 Release 3, MIPS32 Release 5, MIPS32 Release 6, MIPS64,
1472 MIPS64 Release 2, MIPS64 Release 3, MIPS64 Release 5, and MIPS64
1473 Release 6 ISA processors, respectively.
1474 -march=cpu
1476 Generate code for a particular MIPS CPU.
1477 -mtune=cpu
1479 Schedule and tune for a particular MIPS CPU.
1480 -mfix7000
1482 -mno-fix7000
1483 Cause nops to be inserted if the read of the destination register
1484 of an mfhi or mflo instruction occurs in the following two
1485 instructions.
1486 -mfix-rm7000
1488 -mno-fix-rm7000
1489 Cause nops to be inserted if a dmult or dmultu instruction is
1490 followed by a load instruction.
1491 -mfix-r5900
1493 -mno-fix-r5900
1494 Do not attempt to schedule the preceding instruction into the delay
1495 slot of a branch instruction placed at the end of a short loop of
1496 six instructions or fewer and always schedule a "nop" instruction
1497 there instead. The short loop bug under certain conditions causes
1498 loops to execute only once or twice, due to a hardware bug in the
1499 R5900 chip.
1500 -mdebug
1502 -no-mdebug
1503 Cause stabs-style debugging output to go into an ECOFF-style
1504 .mdebug section instead of the standard ELF .stabs sections.
1505 -mpdr
1507 -mno-pdr
1508 Control generation of ".pdr" sections.
1509 -mgp32
1511 -mfp32
1512 The register sizes are normally inferred from the ISA and ABI, but
1513 these flags force a certain group of registers to be treated as 32
1514 bits wide at all times. -mgp32 controls the size of general-
1515 purpose registers and -mfp32 controls the size of floating-point
1516 registers.
1517 -mgp64
1519 -mfp64
1520 The register sizes are normally inferred from the ISA and ABI, but
1521 these flags force a certain group of registers to be treated as 64
1522 bits wide at all times. -mgp64 controls the size of general-
1523 purpose registers and -mfp64 controls the size of floating-point
1524 registers.
1525 -mfpxx
1527 The register sizes are normally inferred from the ISA and ABI, but
1528 using this flag in combination with -mabi=32 enables an ABI variant
1529 which will operate correctly with floating-point registers which
1530 are 32 or 64 bits wide.
1531 -modd-spreg
1533 -mno-odd-spreg
1534 Enable use of floating-point operations on odd-numbered single-
1535 precision registers when supported by the ISA. -mfpxx implies
1536 -mno-odd-spreg, otherwise the default is -modd-spreg.
1537 -mips16
1539 -no-mips16
1540 Generate code for the MIPS 16 processor. This is equivalent to
1541 putting ".module mips16" at the start of the assembly file.
1542 -no-mips16 turns off this option.
1543 -mmips16e2
1545 -mno-mips16e2
1546 Enable the use of MIPS16e2 instructions in MIPS16 mode. This is
1547 equivalent to putting ".module mips16e2" at the start of the
1548 assembly file. -mno-mips16e2 turns off this option.
1549 -mmicromips
1551 -mno-micromips
1552 Generate code for the microMIPS processor. This is equivalent to
1553 putting ".module micromips" at the start of the assembly file.
1554 -mno-micromips turns off this option. This is equivalent to
1555 putting ".module nomicromips" at the start of the assembly file.
1556 -msmartmips
1558 -mno-smartmips
1559 Enables the SmartMIPS extension to the MIPS32 instruction set.
1560 This is equivalent to putting ".module smartmips" at the start of
1561 the assembly file. -mno-smartmips turns off this option.
1562 -mips3d
1564 -no-mips3d
1565 Generate code for the MIPS-3D Application Specific Extension. This
1566 tells the assembler to accept MIPS-3D instructions. -no-mips3d
1567 turns off this option.
1568 -mdmx
1570 -no-mdmx
1571 Generate code for the MDMX Application Specific Extension. This
1572 tells the assembler to accept MDMX instructions. -no-mdmx turns
1573 off this option.
1574 -mdsp
1576 -mno-dsp
1577 Generate code for the DSP Release 1 Application Specific Extension.
1578 This tells the assembler to accept DSP Release 1 instructions.
1579 -mno-dsp turns off this option.
1580 -mdspr2
1582 -mno-dspr2
1583 Generate code for the DSP Release 2 Application Specific Extension.
1584 This option implies -mdsp. This tells the assembler to accept DSP
1585 Release 2 instructions. -mno-dspr2 turns off this option.
1586 -mdspr3
1588 -mno-dspr3
1589 Generate code for the DSP Release 3 Application Specific Extension.
1590 This option implies -mdsp and -mdspr2. This tells the assembler to
1591 accept DSP Release 3 instructions. -mno-dspr3 turns off this
1592 option.
1593 -mmsa
1595 -mno-msa
1596 Generate code for the MIPS SIMD Architecture Extension. This tells
1597 the assembler to accept MSA instructions. -mno-msa turns off this
1598 option.
1599 -mxpa
1601 -mno-xpa
1602 Generate code for the MIPS eXtended Physical Address (XPA)
1603 Extension. This tells the assembler to accept XPA instructions.
1604 -mno-xpa turns off this option.
1605 -mmt
1607 -mno-mt
1608 Generate code for the MT Application Specific Extension. This
1609 tells the assembler to accept MT instructions. -mno-mt turns off
1610 this option.
1611 -mmcu
1613 -mno-mcu
1614 Generate code for the MCU Application Specific Extension. This
1615 tells the assembler to accept MCU instructions. -mno-mcu turns off
1616 this option.
1617 -mcrc
1619 -mno-crc
1620 Generate code for the MIPS cyclic redundancy check (CRC)
1621 Application Specific Extension. This tells the assembler to accept
1622 CRC instructions. -mno-crc turns off this option.
1623 -mginv
1625 -mno-ginv
1626 Generate code for the Global INValidate (GINV) Application Specific
1627 Extension. This tells the assembler to accept GINV instructions.
1628 -mno-ginv turns off this option.
1629 -mloongson-mmi
1631 -mno-loongson-mmi
1632 Generate code for the Loongson MultiMedia extensions Instructions
1633 (MMI) Application Specific Extension. This tells the assembler to
1634 accept MMI instructions. -mno-loongson-mmi turns off this option.
1635 -mloongson-cam
1637 -mno-loongson-cam
1638 Generate code for the Loongson Content Address Memory (CAM)
1639 instructions. This tells the assembler to accept Loongson CAM
1640 instructions. -mno-loongson-cam turns off this option.
1641 -mloongson-ext
1643 -mno-loongson-ext
1644 Generate code for the Loongson EXTensions (EXT) instructions. This
1645 tells the assembler to accept Loongson EXT instructions.
1646 -mno-loongson-ext turns off this option.
1647 -mloongson-ext2
1649 -mno-loongson-ext2
1650 Generate code for the Loongson EXTensions R2 (EXT2) instructions.
1651 This option implies -mloongson-ext. This tells the assembler to
1652 accept Loongson EXT2 instructions. -mno-loongson-ext2 turns off
1653 this option.
1654 -minsn32
1656 -mno-insn32
1657 Only use 32-bit instruction encodings when generating code for the
1658 microMIPS processor. This option inhibits the use of any 16-bit
1659 instructions. This is equivalent to putting ".set insn32" at the
1660 start of the assembly file. -mno-insn32 turns off this option.
1661 This is equivalent to putting ".set noinsn32" at the start of the
1662 assembly file. By default -mno-insn32 is selected, allowing all
1663 instructions to be used.
1664 --construct-floats
1666 --no-construct-floats
1667 The --no-construct-floats option disables the construction of
1668 double width floating point constants by loading the two halves of
1669 the value into the two single width floating point registers that
1670 make up the double width register. By default --construct-floats
1671 is selected, allowing construction of these floating point
1672 constants.
1673 --relax-branch
1675 --no-relax-branch
1676 The --relax-branch option enables the relaxation of out-of-range
1677 branches. By default --no-relax-branch is selected, causing any
1678 out-of-range branches to produce an error.
1679 -mignore-branch-isa
1681 -mno-ignore-branch-isa
1682 Ignore branch checks for invalid transitions between ISA modes.
1683 The semantics of branches does not provide for an ISA mode switch,
1684 so in most cases the ISA mode a branch has been encoded for has to
1685 be the same as the ISA mode of the branch's target label.
1686 Therefore GAS has checks implemented that verify in branch assembly
1687 that the two ISA modes match. -mignore-branch-isa disables these
1688 checks. By default -mno-ignore-branch-isa is selected, causing any
1689 invalid branch requiring a transition between ISA modes to produce
1690 an error.
1691 -mnan=encoding
1693 Select between the IEEE 754-2008 (-mnan=2008) or the legacy
1694 (-mnan=legacy) NaN encoding format. The latter is the default.
1695 --emulation=name
1697 This option was formerly used to switch between ELF and ECOFF
1698 output on targets like IRIX 5 that supported both. MIPS ECOFF
1699 support was removed in GAS 2.24, so the option now serves little
1700 purpose. It is retained for backwards compatibility.
1701 The available configuration names are: mipself, mipslelf and
1703 mipsbelf. Choosing mipself now has no effect, since the output is
1704 always ELF. mipslelf and mipsbelf select little- and big-endian
1705 output respectively, but -EL and -EB are now the preferred options
1706 instead.
1707 -nocpp
1709 as ignores this option. It is accepted for compatibility with the
1710 native tools.
1711 --trap
1713 --no-trap
1714 --break
1715 --no-break
1716 Control how to deal with multiplication overflow and division by
1717 zero. --trap or --no-break (which are synonyms) take a trap
1718 exception (and only work for Instruction Set Architecture level 2
1719 and higher); --break or --no-trap (also synonyms, and the default)
1720 take a break exception.
1721 -n When this option is used, as will issue a warning every time it
1723 generates a nop instruction from a macro.
1724 The following options are available when as is configured for a
1726 LoongArch processor.
1727 -fpic
1729 -fPIC
1730 Generate position-independent code
1731 -fno-pic
1733 Don't generate position-independent code (default)
1734 The following options are available when as is configured for a Meta
1736 processor.
1737 "-mcpu=metac11"
1739 Generate code for Meta 1.1.
1740 "-mcpu=metac12"
1742 Generate code for Meta 1.2.
1743 "-mcpu=metac21"
1745 Generate code for Meta 2.1.
1746 "-mfpu=metac21"
1748 Allow code to use FPU hardware of Meta 2.1.
1749 See the info pages for documentation of the MMIX-specific options.
1751 The following options are available when as is configured for a NDS32
1753 processor.
1754 "-O1"
1756 Optimize for performance.
1757 "-Os"
1759 Optimize for space.
1760 "-EL"
1762 Produce little endian data output.
1763 "-EB"
1765 Produce little endian data output.
1766 "-mpic"
1768 Generate PIC.
1769 "-mno-fp-as-gp-relax"
1771 Suppress fp-as-gp relaxation for this file.
1772 "-mb2bb-relax"
1774 Back-to-back branch optimization.
1775 "-mno-all-relax"
1777 Suppress all relaxation for this file.
1778 "-march=<arch name>"
1780 Assemble for architecture <arch name> which could be v3, v3j, v3m,
1781 v3f, v3s, v2, v2j, v2f, v2s.
1782 "-mbaseline=<baseline>"
1784 Assemble for baseline <baseline> which could be v2, v3, v3m.
1785 "-mfpu-freg=FREG"
1787 Specify a FPU configuration.
1788 "0 8 SP / 4 DP registers"
1790 "1 16 SP / 8 DP registers"
1791 "2 32 SP / 16 DP registers"
1792 "3 32 SP / 32 DP registers"
1793 "-mabi=abi"
1794 Specify a abi version <abi> could be v1, v2, v2fp, v2fpp.
1795 "-m[no-]mac"
1797 Enable/Disable Multiply instructions support.
1798 "-m[no-]div"
1800 Enable/Disable Divide instructions support.
1801 "-m[no-]16bit-ext"
1803 Enable/Disable 16-bit extension
1804 "-m[no-]dx-regs"
1806 Enable/Disable d0/d1 registers
1807 "-m[no-]perf-ext"
1809 Enable/Disable Performance extension
1810 "-m[no-]perf2-ext"
1812 Enable/Disable Performance extension 2
1813 "-m[no-]string-ext"
1815 Enable/Disable String extension
1816 "-m[no-]reduced-regs"
1818 Enable/Disable Reduced Register configuration (GPR16) option
1819 "-m[no-]audio-isa-ext"
1821 Enable/Disable AUDIO ISA extension
1822 "-m[no-]fpu-sp-ext"
1824 Enable/Disable FPU SP extension
1825 "-m[no-]fpu-dp-ext"
1827 Enable/Disable FPU DP extension
1828 "-m[no-]fpu-fma"
1830 Enable/Disable FPU fused-multiply-add instructions
1831 "-mall-ext"
1833 Turn on all extensions and instructions support
1834 The following options are available when as is configured for a PowerPC
1836 processor.
1837 -a32
1839 Generate ELF32 or XCOFF32.
1840 -a64
1842 Generate ELF64 or XCOFF64.
1843 -K PIC
1845 Set EF_PPC_RELOCATABLE_LIB in ELF flags.
1846 -mpwrx | -mpwr2
1848 Generate code for POWER/2 (RIOS2).
1849 -mpwr
1851 Generate code for POWER (RIOS1)
1852 -m601
1854 Generate code for PowerPC 601.
1855 -mppc, -mppc32, -m603, -m604
1857 Generate code for PowerPC 603/604.
1858 -m403, -m405
1860 Generate code for PowerPC 403/405.
1861 -m440
1863 Generate code for PowerPC 440. BookE and some 405 instructions.
1864 -m464
1866 Generate code for PowerPC 464.
1867 -m476
1869 Generate code for PowerPC 476.
1870 -m7400, -m7410, -m7450, -m7455
1872 Generate code for PowerPC 7400/7410/7450/7455.
1873 -m750cl, -mgekko, -mbroadway
1875 Generate code for PowerPC 750CL/Gekko/Broadway.
1876 -m821, -m850, -m860
1878 Generate code for PowerPC 821/850/860.
1879 -mppc64, -m620
1881 Generate code for PowerPC 620/625/630.
1882 -me200z2, -me200z4
1884 Generate code for e200 variants, e200z2 with LSP, e200z4 with SPE.
1885 -me300
1887 Generate code for PowerPC e300 family.
1888 -me500, -me500x2
1890 Generate code for Motorola e500 core complex.
1891 -me500mc
1893 Generate code for Freescale e500mc core complex.
1894 -me500mc64
1896 Generate code for Freescale e500mc64 core complex.
1897 -me5500
1899 Generate code for Freescale e5500 core complex.
1900 -me6500
1902 Generate code for Freescale e6500 core complex.
1903 -mlsp
1905 Enable LSP instructions. (Disables SPE and SPE2.)
1906 -mspe
1908 Generate code for Motorola SPE instructions. (Disables LSP.)
1909 -mspe2
1911 Generate code for Freescale SPE2 instructions. (Disables LSP.)
1912 -mtitan
1914 Generate code for AppliedMicro Titan core complex.
1915 -mppc64bridge
1917 Generate code for PowerPC 64, including bridge insns.
1918 -mbooke
1920 Generate code for 32-bit BookE.
1921 -ma2
1923 Generate code for A2 architecture.
1924 -maltivec
1926 Generate code for processors with AltiVec instructions.
1927 -mvle
1929 Generate code for Freescale PowerPC VLE instructions.
1930 -mvsx
1932 Generate code for processors with Vector-Scalar (VSX) instructions.
1933 -mhtm
1935 Generate code for processors with Hardware Transactional Memory
1936 instructions.
1937 -mpower4, -mpwr4
1939 Generate code for Power4 architecture.
1940 -mpower5, -mpwr5, -mpwr5x
1942 Generate code for Power5 architecture.
1943 -mpower6, -mpwr6
1945 Generate code for Power6 architecture.
1946 -mpower7, -mpwr7
1948 Generate code for Power7 architecture.
1949 -mpower8, -mpwr8
1951 Generate code for Power8 architecture.
1952 -mpower9, -mpwr9
1954 Generate code for Power9 architecture.
1955 -mpower10, -mpwr10
1957 Generate code for Power10 architecture.
1958 -mfuture
1960 Generate code for 'future' architecture.
1961 -mcell
1963 -mcell
1964 Generate code for Cell Broadband Engine architecture.
1965 -mcom
1967 Generate code Power/PowerPC common instructions.
1968 -many
1970 Generate code for any architecture (PWR/PWRX/PPC).
1971 -mregnames
1973 Allow symbolic names for registers.
1974 -mno-regnames
1976 Do not allow symbolic names for registers.
1977 -mrelocatable
1979 Support for GCC's -mrelocatable option.
1980 -mrelocatable-lib
1982 Support for GCC's -mrelocatable-lib option.
1983 -memb
1985 Set PPC_EMB bit in ELF flags.
1986 -mlittle, -mlittle-endian, -le
1988 Generate code for a little endian machine.
1989 -mbig, -mbig-endian, -be
1991 Generate code for a big endian machine.
1992 -msolaris
1994 Generate code for Solaris.
1995 -mno-solaris
1997 Do not generate code for Solaris.
1998 -nops=count
2000 If an alignment directive inserts more than count nops, put a
2001 branch at the beginning to skip execution of the nops.
2002 The following options are available when as is configured for a RISC-V
2004 processor.
2005 -fpic
2007 -fPIC
2008 Generate position-independent code
2009 -fno-pic
2011 Don't generate position-independent code (default)
2012 -march=ISA
2014 Select the base isa, as specified by ISA. For example
2015 -march=rv32ima. If this option and the architecture attributes
2016 aren't set, then assembler will check the default configure setting
2017 --with-arch=ISA.
2018 -misa-spec=ISAspec
2020 Select the default isa spec version. If the version of ISA isn't
2021 set by -march, then assembler helps to set the version according to
2022 the default chosen spec. If this option isn't set, then assembler
2023 will check the default configure setting --with-isa-spec=ISAspec.
2024 -mpriv-spec=PRIVspec
2026 Select the privileged spec version. We can decide whether the CSR
2027 is valid or not according to the chosen spec. If this option and
2028 the privilege attributes aren't set, then assembler will check the
2029 default configure setting --with-priv-spec=PRIVspec.
2030 -mabi=ABI
2032 Selects the ABI, which is either "ilp32" or "lp64", optionally
2033 followed by "f", "d", or "q" to indicate single-precision, double-
2034 precision, or quad-precision floating-point calling convention, or
2035 none to indicate the soft-float calling convention. Also, "ilp32"
2036 can optionally be followed by "e" to indicate the RVE ABI, which is
2037 always soft-float.
2038 -mrelax
2040 Take advantage of linker relaxations to reduce the number of
2041 instructions required to materialize symbol addresses. (default)
2042 -mno-relax
2044 Don't do linker relaxations.
2045 -march-attr
2047 Generate the default contents for the riscv elf attribute section
2048 if the .attribute directives are not set. This section is used to
2049 record the information that a linker or runtime loader needs to
2050 check compatibility. This information includes ISA string, stack
2051 alignment requirement, unaligned memory accesses, and the major,
2052 minor and revision version of privileged specification.
2053 -mno-arch-attr
2055 Don't generate the default riscv elf attribute section if the
2056 .attribute directives are not set.
2057 -mcsr-check
2059 Enable the CSR checking for the ISA-dependent CRS and the read-only
2060 CSR. The ISA-dependent CSR are only valid when the specific ISA is
2061 set. The read-only CSR can not be written by the CSR instructions.
2062 -mno-csr-check
2064 Don't do CSR checking.
2065 -mlittle-endian
2067 Generate code for a little endian machine.
2068 -mbig-endian
2070 Generate code for a big endian machine.
2071 See the info pages for documentation of the RX-specific options.
2073 The following options are available when as is configured for the s390
2075 processor family.
2076 -m31
2078 -m64
2079 Select the word size, either 31/32 bits or 64 bits.
2080 -mesa
2082 -mzarch
2083 Select the architecture mode, either the Enterprise System
2084 Architecture (esa) or the z/Architecture mode (zarch).
2085 -march=processor
2087 Specify which s390 processor variant is the target, g5 (or arch3),
2088 g6, z900 (or arch5), z990 (or arch6), z9-109, z9-ec (or arch7), z10
2089 (or arch8), z196 (or arch9), zEC12 (or arch10), z13 (or arch11),
2090 z14 (or arch12), z15 (or arch13), or z16 (or arch14).
2091 -mregnames
2093 -mno-regnames
2094 Allow or disallow symbolic names for registers.
2095 -mwarn-areg-zero
2097 Warn whenever the operand for a base or index register has been
2098 specified but evaluates to zero.
2099 The following options are available when as is configured for a
2101 TMS320C6000 processor.
2102 -march=arch
2104 Enable (only) instructions from architecture arch. By default, all
2105 instructions are permitted.
2106 The following values of arch are accepted: "c62x", "c64x", "c64x+",
2108 "c67x", "c67x+", "c674x".
2109 -mdsbt
2111 -mno-dsbt
2112 The -mdsbt option causes the assembler to generate the
2113 "Tag_ABI_DSBT" attribute with a value of 1, indicating that the
2114 code is using DSBT addressing. The -mno-dsbt option, the default,
2115 causes the tag to have a value of 0, indicating that the code does
2116 not use DSBT addressing. The linker will emit a warning if objects
2117 of different type (DSBT and non-DSBT) are linked together.
2118 -mpid=no
2120 -mpid=near
2121 -mpid=far
2122 The -mpid= option causes the assembler to generate the
2123 "Tag_ABI_PID" attribute with a value indicating the form of data
2124 addressing used by the code. -mpid=no, the default, indicates
2125 position-dependent data addressing, -mpid=near indicates position-
2126 independent addressing with GOT accesses using near DP addressing,
2127 and -mpid=far indicates position-independent addressing with GOT
2128 accesses using far DP addressing. The linker will emit a warning
2129 if objects built with different settings of this option are linked
2130 together.
2131 -mpic
2133 -mno-pic
2134 The -mpic option causes the assembler to generate the "Tag_ABI_PIC"
2135 attribute with a value of 1, indicating that the code is using
2136 position-independent code addressing, The "-mno-pic" option, the
2137 default, causes the tag to have a value of 0, indicating position-
2138 dependent code addressing. The linker will emit a warning if
2139 objects of different type (position-dependent and position-
2140 independent) are linked together.
2141 -mbig-endian
2143 -mlittle-endian
2144 Generate code for the specified endianness. The default is little-
2145 endian.
2146 The following options are available when as is configured for a TILE-Gx
2148 processor.
2149 -m32 | -m64
2151 Select the word size, either 32 bits or 64 bits.
2152 -EB | -EL
2154 Select the endianness, either big-endian (-EB) or little-endian
2155 (-EL).
2156 The following option is available when as is configured for a Visium
2158 processor.
2159 -mtune=arch
2161 This option specifies the target architecture. If an attempt is
2162 made to assemble an instruction that will not execute on the target
2163 architecture, the assembler will issue an error message.
2164 The following names are recognized: "mcm24" "mcm" "gr5" "gr6"
2166 The following options are available when as is configured for an Xtensa
2168 processor.
2169 --text-section-literals | --no-text-section-literals
2171 Control the treatment of literal pools. The default is
2172 --no-text-section-literals, which places literals in separate
2173 sections in the output file. This allows the literal pool to be
2174 placed in a data RAM/ROM. With --text-section-literals, the
2175 literals are interspersed in the text section in order to keep them
2176 as close as possible to their references. This may be necessary
2177 for large assembly files, where the literals would otherwise be out
2178 of range of the "L32R" instructions in the text section. Literals
2179 are grouped into pools following ".literal_position" directives or
2180 preceding "ENTRY" instructions. These options only affect literals
2181 referenced via PC-relative "L32R" instructions; literals for
2182 absolute mode "L32R" instructions are handled separately.
2183 --auto-litpools | --no-auto-litpools
2185 Control the treatment of literal pools. The default is
2186 --no-auto-litpools, which in the absence of --text-section-literals
2187 places literals in separate sections in the output file. This
2188 allows the literal pool to be placed in a data RAM/ROM. With
2189 --auto-litpools, the literals are interspersed in the text section
2190 in order to keep them as close as possible to their references,
2191 explicit ".literal_position" directives are not required. This may
2192 be necessary for very large functions, where single literal pool at
2193 the beginning of the function may not be reachable by "L32R"
2194 instructions at the end. These options only affect literals
2195 referenced via PC-relative "L32R" instructions; literals for
2196 absolute mode "L32R" instructions are handled separately. When
2197 used together with --text-section-literals, --auto-litpools takes
2198 precedence.
2199 --absolute-literals | --no-absolute-literals
2201 Indicate to the assembler whether "L32R" instructions use absolute
2202 or PC-relative addressing. If the processor includes the absolute
2203 addressing option, the default is to use absolute "L32R"
2204 relocations. Otherwise, only the PC-relative "L32R" relocations
2205 can be used.
2206 --target-align | --no-target-align
2208 Enable or disable automatic alignment to reduce branch penalties at
2209 some expense in code size. This optimization is enabled by
2210 default. Note that the assembler will always align instructions
2211 like "LOOP" that have fixed alignment requirements.
2212 --longcalls | --no-longcalls
2214 Enable or disable transformation of call instructions to allow
2215 calls across a greater range of addresses. This option should be
2216 used when call targets can potentially be out of range. It may
2217 degrade both code size and performance, but the linker can
2218 generally optimize away the unnecessary overhead when a call ends
2219 up within range. The default is --no-longcalls.
2220 --transform | --no-transform
2222 Enable or disable all assembler transformations of Xtensa
2223 instructions, including both relaxation and optimization. The
2224 default is --transform; --no-transform should only be used in the
2225 rare cases when the instructions must be exactly as specified in
2226 the assembly source. Using --no-transform causes out of range
2227 instruction operands to be errors.
2228 --rename-section oldname=newname
2230 Rename the oldname section to newname. This option can be used
2231 multiple times to rename multiple sections.
2232 --trampolines | --no-trampolines
2234 Enable or disable transformation of jump instructions to allow
2235 jumps across a greater range of addresses. This option should be
2236 used when jump targets can potentially be out of range. In the
2237 absence of such jumps this option does not affect code size or
2238 performance. The default is --trampolines.
2239 --abi-windowed | --abi-call0
2241 Choose ABI tag written to the ".xtensa.info" section. ABI tag
2242 indicates ABI of the assembly code. A warning is issued by the
2243 linker on an attempt to link object files with inconsistent ABI
2244 tags. Default ABI is chosen by the Xtensa core configuration.
2245 The following options are available when as is configured for an Z80
2247 processor.
2248 @chapter Z80 Dependent Features
2250 Command-line Options
2252 -march=CPU[-EXT...][+EXT...]
2253 This option specifies the target processor. The assembler will
2254 issue an error message if an attempt is made to assemble an
2255 instruction which will not execute on the target processor. The
2256 following processor names are recognized: "z80", "z180", "ez80",
2257 "gbz80", "z80n", "r800". In addition to the basic instruction set,
2258 the assembler can be told to accept some extention mnemonics. For
2259 example, "-march=z180+sli+infc" extends z180 with SLI instructions
2260 and IN F,(C). The following extentions are currently supported:
2261 "full" (all known instructions), "adl" (ADL CPU mode by default,
2262 eZ80 only), "sli" (instruction known as SLI, SLL or SL1), "xyhl"
2263 (instructions with halves of index registers: IXL, IXH, IYL, IYH),
2264 "xdcb" (instructions like RotOp (II+d),R and BitOp n,(II+d),R),
2265 "infc" (instruction IN F,(C) or IN (C)), "outc0" (instruction OUT
2266 (C),0). Note that rather than extending a basic instruction set,
2267 the extention mnemonics starting with "-" revoke the respective
2268 functionality: "-march=z80-full+xyhl" first removes all default
2269 extentions and adds support for index registers halves only.
2270 If this option is not specified then "-march=z80+xyhl+infc" is
2272 assumed.
2273 -local-prefix=prefix
2275 Mark all labels with specified prefix as local. But such label can
2276 be marked global explicitly in the code. This option do not change
2277 default local label prefix ".L", it is just adds new one.
2278 -colonless
2280 Accept colonless labels. All symbols at line begin are treated as
2281 labels.
2282 -sdcc
2284 Accept assembler code produced by SDCC.
2285 -fp-s=FORMAT
2287 Single precision floating point numbers format. Default: ieee754
2288 (32 bit).
2289 -fp-d=FORMAT
2291 Double precision floating point numbers format. Default: ieee754
2292 (64 bit).
2293
2295 gcc(1), ld(1), and the Info entries for binutils and ld.
2296
2298 Copyright (c) 1991-2023 Free Software Foundation, Inc.
2299 Permission is granted to copy, distribute and/or modify this document
2301 under the terms of the GNU Free Documentation License, Version 1.3 or
2302 any later version published by the Free Software Foundation; with no
2303 Invariant Sections, with no Front-Cover Texts, and with no Back-Cover
2304 Texts. A copy of the license is included in the section entitled "GNU
2305 Free Documentation License".
2306binutils-2.40 2023-07-19 AS(1)