1GROFF_MM(7) Miscellaneous Information Manual GROFF_MM(7)
2
6 groff_mm - groff mm macros
7
9 groff -mm [ options... ] [ files... ]
10
12 The groff mm macros are intended to be compatible with the DWB mm
13 macros with the following limitations:
14 · no Bell Labs localisms implemented.
16 · the macros OK and PM are not implemented.
18 · groff mm does not support cut marks
20 mm is intended to be international. Therefore it is possible to write
22 short national macrofiles which change all english text to the pre‐
23 ferred language. Use mmse as an example.
24 A file called locale or lang_locale is read after the initiation of the
26 global variables. It is therefore possible to localize the macros with
27 companyname and so on.
28 In this manual square brackets is used to show optional arguments.
30 Number registers and strings
34 Many macros can be controlled by number registers and strings. A num‐
35 ber register is assigned with the nr command:
36 .nr XXX [+-]n [i]
37 XXX is the name of the register, n is the value to be assigned, and i
38 is increment value for auto-increment. n can have a plus or minus sign
39 as prefix if an increment or decrement of the current value is wanted.
40 (Auto-increment or decrement occurs if the number register is used with
41 a plus or minus sign, \n+[XXX] or \n-[XXX].)
42 Strings is defined with ds.
44 .ds YYY string
45 The string is assigned everything to the end of the line, even blanks.
46 Initial blanks in string should be prefixed with a double-quote.
47 (Strings are used in the text as \*[YYY].)
48 Special formatting of number registers
50 A number register is printed with normal digits if no format has been
51 given. Set the format with af:
52 .af R c
53 R is the name of the register, c is the format.
54 Form Sequence
55 1 0, 1, 2, 3, ...
56 001 000, 001, 002, 003, ...
57 i 0, i, ii, iii, iv, ...
58 I 0, I, II, III, IV, ...
59 a 0, a, b, c, ..., z, aa, ab, ...
60 A 0, A, B, C, ..., Z, AA, AB, ...
61 Macros:
64 )E level text
66 Adds text (heading-text) to the table of contents with level
67 either 0 or between 1-7. See also .H. This macro is used for
68 customized table of contents.
69 1C [1] Begin one column processing. An 1 as argument disables the
71 page-break. Use wide footnotes, small footnotes may be over‐
72 printed.
73 2C Begin two column processing. Splits the page in two columns.
75 It is a special case of MC. See also 1C.
76 AE Abstract end, see AS.
78 AF [name of firm]
80 Authors firm, should be called before AU, see also COVER.
81 AL [type [text-indent [1]]]
83 Start autoincrement list. Items are numbered beginning on one.
84 The type argument controls the type of numbers.
85 Arg Description
86 1 Arabic (the default)
87 A Upper-case letters (A-Z)
88 a Lower-case letters (a-z)
89 I Upper-case roman
90 i Lower-case roman
91 Text-indent sets the indent and overrides Li. A third argument
92 will prohibit printing of a blank line before each item.
93 APP name text
95 Begin an appendix with name name. Automatic naming occurs if
96 name is "". The appendixes starts with A if auto is used. An
97 new page is ejected, and a header is also produced if the number
98 variable Aph is non-zero. This is the default. The appendix
99 always appear in the 'List of contents' with correct pagenumber.
100 The name APPENDIX can be changed by setting the string App to
101 the desired text. The string Apptxt contains the current appen‐
102 dix text.
103 APPSK name pages text
105 Same as .APP, but the pagenr is incremented with pages. This is
106 used when diagrams or other non-formatted documents are included
107 as appendixes.
108 AS [arg [indent]]
110 Abstract start. Indent is specified in 'ens', but scaling is
111 allowed. Argument arg controls where the abstract is printed.
112 Arg Placement
113 0 Abstract will be printed on page 1 and on the cover sheet
114 if used in the released-paper style (MT 4), otherwise it
115 will be printed on page 1 without a cover sheet.
116 1 Abstract will only be printed on the cover sheet (MT 4
117 only).
118 2 Abstract will be printed only on the cover sheet (other
119 than MT 4 only). The cover sheet is printed without need
120 for CS.
121 Abstract is not printed at all in external letters (MT 5). The
122 indent controls the indentation of both margins, otherwise will
123 normal text indent be used.
124 AST [title]
126 Abstract title. Default is ABSTRACT. Sets the text above the
127 abstract text.
128 AT title1 [title2 ...]
130 Authors title. AT must appear just after each AU. The title
131 will show up after the name in the signature block.
132 AU [name [initials [loc [dept [ext [room [arg [arg [arg]]]]]]]]]
134 Author information, specifies the author of the memo or paper,
135 and will be printed on the cover sheet and on other similar
136 places. AU must not appear before TL. The author information
137 can contain initials, location, department, telephone extension,
138 room number or name and up to three extra arguments.
139 AV [name [1]]
141 Approval signature, generates an approval line with place for
142 signature and date. The string APPROVED: can be changed with
143 variable Letapp, and the string Date in Letdate.
144 AVL [name]
146 Letter signature, generates a line with place for signature.
147 B [bold-text [prev-font-text [bold...]]]
149 Begin boldface. No limit on the number of arguments. All argu‐
150 ments will be concatenated to one word, the first, third and so
151 on will be printed in boldface.
152 B1 Begin box (as the ms macro). Draws a box around the text. The
154 text will be indented one character, and the right margin will
155 be one character shorter.
156 B2 End box. Finish the box started by B1.
158 BE End bottom block, see BS.
160 BI [bold-text [italic-text [bold-text [...]]]]
162 Bold-italic. No limit on the number of arguments, see B.
163 BL [text-indent [1]]
165 Start bullet list, initialize a list with a bullet and a space
166 in the beginning of each list item (see LI). Text-indent over‐
167 rides the default indentation of the list items set by number
168 register Pi. A third argument will prohibit printing of a blank
169 line before each item.
170 BR [bold-text [roman-text [bold-text [...]]]]
172 Bold-roman. No limit on the number of arguments.
173 BS Bottom block start. Begins the definition of a text block which
175 is printed at the bottom of each page. Block ends with BE.
176 BVL text-indent [mark-indent [1]]
178 Start of broken variable-item list. Broken variable-item list
179 has no fixed mark, it assumes that every LI has a mark instead.
180 The text will always begin at the next line after the mark.
181 Text-indent sets the indent to the text, and mark-indent the
182 distance from the current indent to the mark. A third argument
183 will prohibit printing of a blank line before each item.
184 COVER [arg]
186 COVER begins a coversheet definition. It is important that
187 .COVER appears before any normal text. .COVER uses arg to build
188 the filename /usr/share/groff/1.18.1.4/tmac/mm/arg.cov. There‐
189 fore it is possible to create unlimited types of coversheets.
190 ms.cov is supposed to look like the ms coversheet. .COVER
191 requires a .COVEND at the end of the coverdefinition. Always
192 use this order of the covermacros:
193 .COVER
194 .TL
195 .AF
196 .AU
197 .AT
198 .AS
199 .AE
200 .COVEND
201 However, only .TL and .AU are required.
202 COVEND This finish the cover description and prints the cover-page. It
204 is defined in the cover file.
205 DE Display end. Ends a block of text, display, that begins with DS
207 or DF.
208 DF [format [fill [rindent]]]
210 Begin floating display (no nesting allowed). A floating display
211 is saved in a queue and is printed in the order entered. For‐
212 mat, fill and rindent is the same as in DS. Floating displays
213 are controlled by the two number registers De and Df.
214 De register
216 0 Nothing special, this is the default.
217 1 A page eject will occur after each printed display, giving
218 only one display per page and no text following it.
219 Df register
221 0 Displays are printed at the end of each section (when sec‐
222 tion-page numbering is active) or at the end of the docu‐
223 ment.
224 1 A new display will be printed on the current page if there
225 is enough space, otherwise it will be printed at the end of
226 the document.
227 2 One display will be printed at the top of each page or col‐
228 umn (in multi-column mode).
229 3 Print one display if there is enough space for it, other‐
230 wise it will be printed at the top of the next page or col‐
231 umn.
232 4 Print as many displays that will fit in a new page or col‐
233 umn. A page break will occur between each display if De is
234 not zero.
235 5 Fill the current page with displays and the rest beginning
236 at a new page or column. (This is the default.) A page
237 break will occur between each display if De is not zero.
238 DL [text-indent [1 [1]]]
240 Dash list start. Begins a list where each item is printed after
241 a dash. Text-indent changes the default indentation of the list
242 items set by number register Pi. A second argument prevents the
243 empty line between each list item to be printed. See LI. A
244 third argument will prohibit printing of a blank line before
245 each item.
246 DS [format [fill [rindent]]]
248 Static display start. Begins collection of text until DE. The
249 text is printed together on the same page, unless it is longer
250 than the height of the page. DS can be nested to a unlimited
251 depth (reasonably :-).
252 format
254 "" No indentation.
255 none No indentation.
256 L No indentation.
257 I Indent text with the value of number register Si.
258 C Center each line
259 CB Center the whole display as a block.
260 R Right adjust the lines.
261 RB Right adjust the whole display as a block
262 L, I, C and CB can also be specified as 0, 1, 2 or 3 for compat‐
264 ibility reasons. (Don't use it. :-)
265 fill
267 "" Line-filling turned off.
268 none Line-filling turned off.
269 N Line-filling turned off.
270 F Line-filling turned on.
271 N and F can also be specified as 0 or 1. An empty line will
273 normally be printed before and after the display. Setting num‐
274 ber register Ds to 0 will prevent this. Rindent shortens the
275 line length by that amount.
276 EC [title [override [flag [refname]]]]
278 Equation title. Sets a title for an equation. The override
279 argument change the numbering.
280 flag
282 none override is a prefix to the number.
283 0 override is a prefix to the number.
284 1 override is a suffix to the number.
285 2 override replaces the number.
286 EC uses the number register Ec as counter. It is possible to
287 use .af to change the format of the number. If number register
288 Of is 1, then the format of title will use a dash instead of a
289 dot after the number.
290 The string Le controls the title of the List of Equations,
291 default is LIST OF EQUATIONS. The List of Equations will only
292 be printed if number register Le is 1, default 0. The string
293 Liec contains the word Equation, wich is printed before the num‐
294 ber. If refname is used, then the equation number is saved with
295 .SETR, and can be retrieved with .GETST refname.
296 Special handling of the title will occur if EC is used inside
297 DS/DE, it will not be affected by the format of DS.
298 EF [arg]
300 Even-page footer, printed just above the normal page footer on
301 even pages, see PF.
302 EH [arg]
304 Even-page header, printed just below the normal page header on
305 even pages, see PH.
306 EN Equation end, see EQ.
308 EOP End of page user-defined macro. This macro will be called
310 instead of the normal printing of the footer. The macro will be
311 executed in a separate environment, without any trap active.
312 See TP.
313 Strings available to EOP
315 EOPf Argument from PF.
316 EOPefArgument from EF.
317 EOPofArgument from OF.
318 EPIC [-L] width height [name]
320 EPIC draws a box with the given width and height, it will also
321 print the text name or a default string if name is not speci‐
322 fied.. This is used to include external pictures, just give the
323 size of the picture. -L will leftadjust the picture, the
324 default is to center adjust. See PIC
325 EQ [label]
327 Equation start. EQ/EN are the delimiters for equations written
328 for eqn. EQ/EN must be inside a DS/DE-pair, except when EQ is
329 only used to set options in eqn. The label will appear at the
330 right margin of the equation, unless number register Eq is 1.
331 Then the label will appear at the left margin.
332 EX [title [override [flag [refname]]]]
334 Exhibit title, arguments are the same as for EC. EX uses the
335 number register Ex as counter. The string Lx controls the title
336 of the List of Exhibits, default is LIST OF EXHIBITS. The List
337 of Exhibits will only be printed if number register Lx is 1,
338 default 1. The string Liex contains the word Exhibit, which is
339 printed before the number. If refname is used, then the exhibit
340 number is saved with .SETR, and can be retrieved with .GETST
341 refname.
342 Special handling of the title will occur if EX is used inside
343 DS/DE, it will not be affected by the format of DS.
344 FC [closing]
346 Prints Yours very truly, as a formal closing of a letter or mem‐
347 orandum. The argument replaces the defualt string. The default
348 is stored in string variable Letfc.
349 FD [arg [1]]
351 Footnote default format. Controls the hyphenation (hyphen),
352 right margin justification (adjust), indentation of footnote
353 text (indent). It can also change the label justification
354 (ljust).
355 arg hyphen adjust indent ljust
357 0 no yes yes left
358 1 yes yes yes left
359 2 no no yes left
360 3 yes no yes left
361 4 no yes no left
362 5 yes yes no left
363 6 no no no left
364 7 yes no no left
365 8 no yes yes right
366 9 yes yes yes right
367 10 no no yes right
368 11 yes no yes right
369 Argument greater than or equal to 11 is considered as arg 0.
371 Default for mm is 10.
372 FE Footnote end.
374 FG [title [override [flag [refname]]]]
376 Figure title, arguments are the same as for EC. FG uses the
377 number register Fg as counter. The string Lf controls the title
378 of the List of Figures, default is LIST OF FIGURES. The List of
379 Figures will only be printed if number register Lf is 1, default
380 1. The string Lifg contains the word Figure, wich is printed
381 before the number. If refname is used, then the figure number
382 is saved with .SETR, and can be retrieved with .GETST refname.
383 Special handling of the title will occur if FG is used inside
384 DS/DE, it will not be affected by the format of DS.
385 FS [label]
387 Footnote start. The footnote is ended by FE. Footnotes is nor‐
388 mally automatically numbered, the number is available in string
389 F. Just add \*F in the text. By adding label, it is possible
390 to have other number or names on the footnotes. Footnotes in
391 displays is now possible. An empty line separates footnotes,
392 the height of the line is controlled by number register Fs,
393 default value is 1.
394 GETHN refname [varname]
396 Includes the headernumber where the corresponding SETR refname
397 was placed. Will be X.X.X. in pass 1. See INITR. If varname
398 is used, GETHN sets the stringvariable varname to the headernum‐
399 ber.
400 GETPN refname [varname]
402 Includes the pagenumber where the corresponding SETR refname was
403 placed. Will be 9999 in pass 1. See INITR. If varname is
404 used, GETPN sets the stringvariable varname to the pagenumber.
405 GETR refname
407 Combines GETHN and GETPN with the text 'chapter' and ', page'.
408 The string Qrf contains the text for reference:
409 .ds Qrf See chapter \\*[Qrfh], page \\*[Qrfp].
410 Qrf may be changed to support other languages. Strings Qrfh and
411 Qrfp are set by GETR and contains the page and headernumber.
412 GETST refname [varname]
414 Includes the string saved with the second argument to .SETR.
415 Will be dummystring in pass 1. If varname is used, GETST sets
416 the stringvariable varname to the saved string. See INITR.
417 H level [heading-text [heading-suffix]]
419 Numbered section heading. Section headers can have a level
420 between 1 and 7, level 1 is the top level. The text is given in
421 heading-text, and must be surrounded by double quotes if it con‐
422 tains spaces. Heading-suffix is added to the header in the text
423 but not in the table of contents. This is normally used for
424 footnote marks and similar things. Don't use \*F in heading-
425 suffix, it won't work. A manual label must be used, see FS.
426 An eventual paragraph, P, directly after H will be ignored, H is
428 taking care of spacing and indentation.
429 Page ejection before heading
431 Number register Ej controls page ejection before the heading.
432 Normally, a level one heading gets two blank lines before it,
433 higher levels gets only one. A new page is ejected before each
434 first-level heading if number register Ej is 1. All levels
435 below or equal the value of Ej gets a new page. Default value
436 for Ej is 0.
437 Heading break level
439 A line break occurs after the heading if the heading level is
440 less or equal to number register Hb. Default value 2.
441 Heading space level
443 A blank line is inserted after the heading if the heading level
444 is less or equal to number register Hs. Default value 2.
445 Text will follow the heading on the same line if the level is
447 greater than both Hb and Hs.
448 Post-heading indent
450 Indentation of the text after the heading is controlled by num‐
451 ber register Hi, default value 0.
452 Hi
454 0 The text will be left-justified.
455 1 Indentation of the text will follow the value of number
456 register Pt, see P.
457 2 The text will be lined up with the first word of the head‐
458 ing.
459 Centered section headings
461 All headings whose level is equal or below number register Hc
462 and also less than or equal to Hb or Hs is centerered.
463 Font control of the heading
465 The font of each heading level is controlled by string HF. It
466 contains a fontnumber or fontname for each level. Default is
467 2 2 2 2 2 2 2 (all headings in italic). Could also be written
468 as I I I I I I I. Note that some other implementations use
469 3 3 2 2 2 2 2 as the default value. All omitted values are pre‐
470 sumed to be a 1.
471 Point size control.
473 String HP controls the pointsize of each heading, in the same
474 way as HF controls the font. A value of 0 selects the default
475 point size. Default value is 0 0 0 0 0 0 0. Beware that only
476 the point size changes, not the vertical size. That can be con‐
477 trolled by the user specified macro HX and/or HZ.
478 Heading counters
480 Seven number registers, named H1 thru H7 contains the counter
481 for each heading level. The values are printed using arabic
482 numerals, this can be changed with the macro HM (see below).
483 All marks are concatenated before printing. To avoid this, set
484 number register Ht to 1. That will only print the current head‐
485 ing counter at each heading.
486 Automatic table of contents
488 All headings whose level is equal or below number register Cl is
489 saved to be printed in the table of contents. Default value
490 is 2.
491 Special control of the heading, user-defined macros.
493 These macros can be defined by the user to get a finer control
494 of vertical spacing, fonts or other features. Argument level is
495 the level-argument to H, but 0 for unnumbered headings (see HU).
496 Argument rlevel is the real level, it is set to number register
497 Hu for unnumbered headings. Argument heading-text is the text
498 argument to H and HU.
499 HX level rlevel heading-text
501 HX is called just before the printing of the heading. The fol‐
502 lowing register is available for HX. HX may alter }0, }2 and
503 ;3.
504 string }0
505 Contains the heading mark plus two spaces if rlevel is non-
506 zero, otherwise empty.
507 register ;0
508 Contains the position of the text after the heading. 0
509 means that the text should follow the heading on the same
510 line, 1 means that a line break should occur before the
511 text and 2 means that a blank line should separate the
512 heading and the text.
513 string }2
514 Contains two spaces if register ;0 is 0. It is used to
515 separate the heading from the text. The string is empty if
516 ;0 is non-zero.
517 register ;3
518 Contains the needed space in units after the heading.
519 Default is 2v.
520 Can be used to change things like numbering (}0), vertical
522 spacing (}2) and the needed space after the heading.
523 HY dlevel rlevel heading-text
525 HY is called after size and font calculations and might be used
526 to change indentation.
527 HZ dlevel rlevel heading-text
529 HZ is called after the printing of the heading, just before H or
530 HU exits. Could be used to change the page header according to
531 the section heading.
532 HC [hyphenation-character]
534 Set hyphenation character. Default value is \%. Resets to the
535 default if called without argument. Hyphenation can be turned
536 off by setting number register Hy to 0 in the beginning of the
537 file.
538 HM [arg1 [arg2 [... [arg7]]]]
540 Heading mark style. Controls the type of marking for printing
541 of the heading counters. Default is 1 for all levels.
542 Argument
544 1 Arabic numerals.
545 0001 Arabic numerals with leading zeroes, one or more.
546 A Upper-case alphabetic
547 a Lower-case alphabetic
548 I Upper-case roman numerals
549 i
550 lower-case roman numerals
551 emptyArabic numerals.
552 HU heading-text
554 Unnumbered section header. HU behavies like H at the level in
555 number register Hu. See H.
556 HX dlevel rlevel heading-text
558 Userdefined heading exit. Called just before printing the
559 header. See H.
560 HY dlevel rlevel heading-text
562 Userdefined heading exit. Called just before printing the
563 header. See H.
564 HZ dlevel rlevel heading-text
566 Userdefined heading exit. Called just after printing the
567 header. See H.
568 I [italic-text [prev-font-text [italic-text [...]]]]
570 Italic. Changes the font to italic if called without arguments.
571 With one argument it will set the word in italic. With two
572 argument it will concatenate them and set the first word in
573 italic and the second in the previous font. There is no limit
574 on the number of argument, all will be concatenated.
575 IA [addressee-name [title]]
577 Begins specification of the addressee and addressee's address in
578 letter style. Several names can be specified with empty IA/IE-
579 pairs, but only one address. See LT.
580 IB [italic-text [bold-text [italic-text [...]]]]
582 Italic-bold. Even arguments is printed in italic, odd in bold‐
583 face. See I.
584 IE Ends the address-specification after IA.
586 INITI type filename [macro]
588 Initialize the new index system, sets the filename to collect
589 index lines in with IND. Argument type selects the type of
590 index, page number, header marks or both. The default is N.
591 It is also possible to create a macro that is responsible for
593 formatting each row. Add the name of the macro as argument 3.
594 The macro will be called with the index as argument(s).
595 type
597 N Page numbers
598 H Header marks
599 B Both page numbers and header marks, tab separated
600 INITR filename
602 Initialize the refencemacros. References will be written to
603 stderr and is supposed to be written to filename.qrf. Requires
604 two passes with groff, this is handled by a separate program
605 called mmroff, the reason is that groff is often installed with‐
606 out the unsafe operations that INITR requiered. The first pass
607 looks for references and the second one includes them. INITR
608 can be used several times, but it is only the first occurrence
609 of INITR that is active.
610 See also SETR, GETPN and GETHN.
612 IND arg1 [arg2 [...]]
614 IND writes a line in the index file selected by INITI with all
615 arguments and the page number or header mark separated by tabs.
616 Examples
617 arg1\tpage number
618 arg1\targ2\tpage number
619 arg1\theader mark
620 arg1\tpage number\theader mark
621 INDP INDP prints the index by running the command specified by string
623 variable Indcmd, normally sort -t\t. INDP reads the output from
624 the command to form the index, normally in two columns (can be
625 changed by defining TYIND). The index is printed with string
626 variable Index as header, default is INDEX. One-column process‐
627 ing is returned after the list. INDP will call the user-defined
628 macros TXIND, TYIND and TZIND if defined. TXIND is called
629 before printing INDEX, TYIND is called instead of printing
630 INDEX. TZIND is called after the printing and should take care
631 of restoring to normal operation again.
632 ISODATE [0]
634 ISODATE changes the predefined date string in DT to ISO-format,
635 ie YYYY-MM-DD. This can also be done by adding -rIso=1 on the
636 command line. Reverts to old date format if argument is 0.
637 IR [italic-text [roman-text [italic-text [...]]]]
639 Italic-roman. Even arguments is printed in italic, odd in
640 roman. See I.
641 LB text-indent mark-indent pad type [mark [LI-space [LB-space]]]
643 List begin macro. This is the common macro used for all lists.
644 Text-indent is the number of spaces to indent the text from the
645 current indent.
646 Pad and mark-indent controls where to put the mark. The mark is
648 placed within the mark area, and mark-indent sets the number of
649 spaces before this area. It is normally 0. The mark area ends
650 where the text begins. The start of the text is still con‐
651 trolled by text-indent.
652 The mark is left justified whitin the mark area if pad is 0. If
654 pad is greater than 0, then mark-indent is ignored, and the mark
655 is placed pad spaces before the text. This will right justify
656 the mark.
657 If type is 0 the list will have either a hanging indent or, if
659 argument mark is given, the string mark as mark.
660 If type is greater than 0 automatic numbering will occur, arabic
662 if mark is empty. Mark can then be any of 1, A, a, I or i.
663 Type selects one of six possible ways to display the mark.
665 type
666 1 x.
667 2 x)
668 3 (x)
669 4 [x]
670 5 <x>
671 6 {x}
672 Every item in the list will get LI-space number of blank lines
674 before them. Default is 1.
675 LB itself will print LB-space blank lines. Default is 0.
677 LC [list-level]
679 List-status clear. Terminates all current active lists down to
680 list-level, or 0 if no argmuent is given. This is used by H to
681 clear any active list.
682 LE [1] List end. Terminate the current list. LE outputs a blank line
684 if an argument is given.
685 LI [mark [1]]
687 List item precedes every item in a list. Without argument LI
688 will print the mark determined by the current list type. By
689 giving LI one argument, it will use that as the mark instead.
690 Two arguments to LI will make mark a prefix to the current mark.
691 There will be no separating space between the prefix and the
692 mark if the second argument is 2 instead of 1. This behaviour
693 can also be achieved by setting number register Limsp to zero.
694 A zero length mark will make a hanging indent instead.
695 A blank line is normally printed before the list item. This be‐
697 haviour can be controlled by number register Ls. Pre-spacing
698 will occur for each list-level less than or equal to Ls.
699 Default value is 99. (Nesting of lists is unlimited. :-)
700 The indentation can be changed thru number register Li. Default
702 is 6.
703 All lists begins with a list initialization macro, LB. There
705 are, however, seven predefined listtypes to make lists easier to
706 use. They all call LB with different default values.
707 AL Automatically Incremented List
708 ML Marked List
709 VL Variable-Item List
710 BL Bullet List
711 DL Dash List
712 RL Reference List
713 BVL Broken Varable List.
714 These lists are described at other places in this manual. See
715 also LB.
716 LT [arg]
718 Formats a letter in one of four different styles depending on
719 the argument. See also INTERNALS.
720 Arg Style
721 BL Blocked. Date line, return address, writer's address and
722 closing begins at the center of the line. All other lines
723 begin at the left margin.
724 SB Semi-blocked. Same as blocked, except that the first line
725 in every paragraph is indented five spaces.
726 FB Full-blocked. All lines begin at the left margin.
727 SP Simplified. Almost the same as the full-blocked style.
728 Subject and the writer's identification are printed in all-
729 capital.
730 LO type [arg]
732 Specify options in letter (see .LT). This is a list of the
733 standard options:
734 CN Confidential notation. Prints CONFIDENTIAL on the second
735 line below the date line. Any argument replaces CONFIDEN‐
736 TIAL. See also string variable LetCN.
737 RN Reference notation. Prints In reference to: and the argu‐
738 ment two lines below the date line. See also string vari‐
739 able LetRN.
740 AT Attention. Prints ATTENTION: and the argument below the
741 inside address. See also string variable LetAT.
742 SA Salutation. Prints To Whom It May Concern: or the argument
743 if it was present. The salutation is printed two lines
744 below the inside address. See also string variable LetSA.
745 SJ Subject line. Prints the argument as subject prefixed with
746 SUBJECT: two lines below the inside address, except in let‐
747 ter type SP. Then the subject is printed in all-captial
748 without any prefix. See also string variable LetSJ.
749 MC column-size [column-separation]
751 Begin multiple columns. Return to normal with 1C. MC will cre‐
752 ate as many columns as the current line length permits. Column-
753 size is the width of each column, and column-separation is the
754 space between two columns. Default separation is the column-
755 size/15. See also 1C.
756 ML mark [text-indent [1]]
758 Marked list start. The mark argument will be printed before
759 each list item. Text-indent sets the indent and overrides Li.
760 A third argument will prohibit printing of a blank line before
761 each item.
762 MT [arg [addressee]]
764 Memorandum type. The arg is part of a filename in
765 /usr/share/groff/1.18.1.4/tmac/mm/*.MT. Memorandum type 0 thru
766 5 are supported, including "string". Addressee just sets a
767 variable, used in the AT&T macros.
768 arg
769 0 Normal memorandum, no type printed
770 1 Memorandum with MEMORANDUM FOR FILE printed
771 2 Memorandum with PROGRAMMER'S NOTES printed
772 3 Memorandum with ENGINEER'S NOTES printed
773 4 Released paper style
774 5 External letter style
775 See also COVER/COVEND, a more flexible type of front page.
776 MOVE y-pos [x-pos [line-length]]
778 Move to a position, pageoffset set to x-pos. If line-length is
779 not given, the difference between current and new pageoffset is
780 used. Use PGFORM without arguments to return to normal.
781 MULB cw1 space1 [cw2 space2 [cw3 ...]]
783 Begin a special multi-column mode. Every columns width must be
784 specified. Also the space between the columns must be speci‐
785 fied. The last column does not need any space-definition. MULB
786 starts a diversion and MULE ends the diversion and prints the
787 columns. The unit for width and space is 'n', but MULB accepts
788 all normal unitspecifications like 'c' and 'i'. MULB operates
789 in a separate environment.
790 MULN Begin the next column. This is the only way to switch column.
792 MULE End the multi-column mode and print the columns.
794 nP [type]
796 Print numbered paragraph with header level two. See .P.
797 NCOL Force printing to the next column, don't use this together with
799 the MUL* macros, see 2C.
800 NS [arg [1]]
802 Prints different types of notations. The argument selects
803 between the predefined type of notations. If the second argu‐
804 ment is available, then the argument becomes the entire nota‐
805 tion. If the argument doesn't exist in the predefined, it will
806 be printed as Copy (arg) to. It is possible to add more stan‐
807 dard notations, see the string variable Letns and Letnsdef.
808 Arg Notation
809 none Copy To
810 "" Copy To
811 1 Copy To (with att.) to
812 2 Copy To (without att.) to
813 3 Att.
814 4 Atts.
815 5 Enc.
816 6 Encs.
817 7 Under separate cover
818 8 Letter to
819 9 Memorandum to
820 10 Copy (with atts.) to
821 11 Copy (without atts.) to
822 12 Abstract Only to
823 13 Complete Memorandum to
824 14 CC
825 ND new-date
827 New date. Override the current date. Date is not printed if
828 new-date is an empty string.
829 OF [arg]
831 Odd-page footer, a line printed just above the normal footer.
832 See EF and PF.
833 OH [arg]
835 Odd-page header, a line printed just below the normal header.
836 See EH and PH.
837 OP Make sure that the following text is printed at the top of an
839 odd-numbered page. Will not output an empty page if currently
840 at the top of an odd page.
841 P [type]
843 Begin new paragraph. P without argument will produce left jus‐
844 tified text, even the first line of the paragraph. This is the
845 same as setting type to 0. If the argument is 1, then the first
846 line of text following P will be indented by the number of spa‐
847 ces in number register Pi, normally 5.
848 Instead of giving 1 as argument to P it is possible to set the
850 paragraph type in number register Pt. Using 0 and 1 will be the
851 same as adding that value to P. A value of 2 will indent all
852 paragraphs, except after headings, lists and displays.
853 The space between two paragraphs is controlled by number regis‐
855 ter Ps, and is 1 by default (one blank line).
856 PGFORM [linelength [pagelength [pageoffset [1]]]]
858 Sets linelength, pagelength and/or pageoffset. This macro can
859 be used for special formatting, like letterheads and other. It
860 is normally the first command in a file, though it's not neces‐
861 sary. PGFORM can be used without arguments to reset everything
862 after a MOVE. A line-break is done unless the fourth argument
863 is given. This can be used to avoid the pagenumber on the first
864 page while setting new width and length. (It seems as if this
865 macro sometimes doesn't work too well. Use the command line
866 arguments to change linelength, pagelength and pageoffset
867 instead. Sorry.)
868 PGNH No header is printed on the next page. Used to get rid of the
870 header in letters or other special texts. This macro must be
871 used before any text to inhibit the pageheader on the first
872 page.
873 PIC [-L] [-C] [-R] [-I n] filename [width [height]]
875 PIC includes a Postscript file in the document. The macro
876 depends on mmroff and INITR. -L, -C, -R and -I n adjusts the
877 picture or indents it. The optionally width and height can also
878 be given to resize the picture.
879 PE Picture end. Ends a picture for pic, see the manual for pic.
881 PF [arg]
883 Page footer. PF sets the line to be printed at the bottom of
884 each page. Normally empty. See PH for the argument specifica‐
885 tion.
886 PH [arg]
888 Page header, a line printed at the top of each page. The argu‐
889 ment should be specified as "'left-part'center-part'right-
890 part'", where left-, center- and right-part is printed left-jus‐
891 tified, centered and right justified. The character % is
892 changed to the current page number. The default page-header is
893 "''- % -''", the page number between two dashes.
894 PS Picture start (from pic). Begins a picture for pic, see the
896 manual.
897 PX Page-header user-defined exit. PX is called just after the
899 printing of the page header in no-space mode.
900 R Roman. Return to roman font, see also I.
902 RB [roman-text [bold-text [roman-text [...]]]]
904 Roman-bold. Even arguments is printed in roman, odd in bold‐
905 face. See I.
906 RD [prompt [diversion [string]]]
908 Read from standard input to diversion and/or string. The text
909 will be saved in a diversion named diversion. Recall the text
910 by writing the name of the diversion after a dot on an empty
911 line. A string will also be defined if string is given. Diver‐
912 sion and/or prompt can be empty ("").
913 RF Reference end. Ends a reference definition and returns to nor‐
915 mal processing. See RS.
916 RI [roman-text [italic-text [roman-text [...]]]]
918 Even arguments are printed in roman, odd in italic. See I.
919 RL [text-indent [1]]
921 Reference list start. Begins a list where each item is preceded
922 with a automatically incremented number between square brackets.
923 Text-indent changes the default indentation.
924 RP [arg1 [arg2]]
926 Produce reference page. RP can be used if a reference page is
927 wanted somewhere in the document. It is not needed if TC is
928 used to produce a table of content. The reference page will
929 then be printed automatically.
930 The reference counter will not be reset if arg1 is 1.
932 Arg2 tells RP whether to eject a page or not.
934 Arg2
935 0 The reference page will be printed on a separate page.
936 This is the default.
937 1 Do not eject page after the list.
938 2 Do not eject page before the list.
939 3 Do not eject page before and after the list.
940 The reference items will be separated by a blank line. Setting
941 number register Ls to 0 will suppress the line.
942 The string Rp contains the reference page title and is normally
944 set to REFERENCES.
945 RS [string-name]
947 RS begins an automatically numbered reference definition. Put
948 the string \*(Rf where the reference mark should be and write
949 the reference between RS/RF at next new line after the reference
950 mark. The reference number is stored in number register :R. If
951 string-name is given, a string with that name will be defined
952 and contain the current reference mark. The string can be ref‐
953 erenced as \*[string-name] later in the text.
954 S [size [spacing]]
956 Set point size and vertical spacing. If any argument is equal
957 'P', then the previous value is used. A 'C' means current
958 value, and 'D' default value. If '+' or '-' is used before the
959 value, then increment or decrement of the current value will be
960 done.
961 SA [arg]
963 Set right-margin justification. Justification is normally
964 turned on. No argumenent or 0 turns off justification, a 1
965 turns on justification.
966 SETR refname [string]
968 Remember the current header and page-number as refname. Saves
969 string if string is defined. string is retrieved with .GETST.
970 See INITR.
971 SG [arg [1]]
973 Signature line. Prints the authors name(s) after the formal
974 closing. The argument will be appended to the reference data,
975 printed at either the first or last author. The reference data
976 is the location, department and initials specified with .AU. It
977 will be printed at the first author if the second argument is
978 given, otherwise at the last. No reference data will be printed
979 if the author(s) is specifed thru .WA/.WE. See INTERNALS.
980 SK [pages]
982 Skip pages. If pages is 0 or omitted, a skip to the next page
983 will occur unless it is already at the top of a page. Otherwise
984 it will skip pages pages.
985 SM string1 [string2 [string3]]
987 Make a string smaller. If string2 is given, string1 will be
988 smaller and string2 normal, concatenated with string1. With
989 three argument, all is concatenated, but only string2 is made
990 smaller.
991 SP [lines]
993 Space vertically. lines can have any scalingfactor, like 3i or
994 8v. Several SP in a line will only produce the maximum number
995 of lines, not the sum. SP will also be ignored until the first
996 textline in a page. Add a \& before SP to avoid this.
997 TAB reset tabs to every 5n. Normally used to reset any previous
999 tabpositions.
1000 TB [title [override [flag [refname]]]]
1002 Table title, arguments are the same as for EC. TB uses the num‐
1003 ber register Tb as counter. The string Lt controls the title of
1004 the List of Tables, default is LIST OF TABLES. The List of
1005 Tables will only be printed if number register Lt is 1, default
1006 1. The string Litb contains the word TABLE, wich is printed
1007 before the number.
1008 Special handling of the title will occur if TB is used inside
1009 DS/DE, it will not be affected by the format of DS.
1010 TC [slevel [spacing [tlevel [tab [h1 [h2 [h3 [h4 [h5]]]]]]]]]
1012 Table of contents. This macro is normally used at the last line
1013 of the document. It generates a table of contents with headings
1014 up to the level controlled by number register Cl. Note that Cl
1015 controls the saving of headings, it has nothing to do with TC.
1016 Headings with level less than or equal to slevel will get spac‐
1017 ing number of lines before them. Headings with level less than
1018 or equal to tlevel will have their page numbers right justified
1019 with dots or spaces separating the text and the page number.
1020 Spaces is used if tab is greater than zero, otherwise dots.
1021 Other headings will have the page number directly at the end of
1022 the heading text (ragged right).
1023 The rest of the arguments will be printed, centered, before the
1025 table of contents.
1026 The user-defined macros TX and TY are used if TC is called with
1028 at most four arguments. TX is called before the printing of
1029 CONTENTS, and TY is called instead of printing CONTENTS.
1030 Equivalent macros can be defined for list of figures, tables,
1032 equations and excibits by defining TXxx or TYxx, where xx is Fg,
1033 TB, EC or EX.
1034 String Ci can be set to control the indentations for each head‐
1036 ing-level. It must be scaled, like .ds Ci .25i .5i .75i 1i 1i.
1037 The indentation is normally controlled by the maxlength of head‐
1038 ings in each level.
1039 All texts can be redefined, new stringvariables Lifg, Litb,
1041 Liex, Liec and Licon contain "Figure", "TABLE", "Exhibit",
1042 "Equation" and "CONTENTS". These can be redefined to other lan‐
1043 guages.
1044 TE Table end. See TS.
1046 TH [N] Table header. See TS. TH ends the header of the table. This
1048 header will be printed again if a page-break occurs. Argument N
1049 isn't implemented yet.
1050 TL [charging-case number(s) [filing-case number(s)]]
1052 Begin title of memorandum. All text up to the next AU is
1053 included in the title. Charging-case number and filing-case are
1054 saved for use in the front page processing.
1055 TM [num1 [num2 [...]]]
1057 Technical memorandumnumbers used in .MT. Unlimited number of
1058 arguments may be given.
1059 TP Top of page user-defined macro. This macro is called instead of
1061 the normal page header. It is possible to get complete control
1062 over the header. Note that header and footer is printed in a
1063 separate environment. Linelength is preserved though.
1064 TS [H] Table start. This is the start of a table specification to tbl.
1066 See separate manual for tbl. TS ends with TE. Argument H tells
1067 mm that the table has a header. See TH.
1068 TX Userdefined table of contents exit. This macro is called just
1070 before TC prints the word CONTENTS. See TC.
1071 TY Userdefined table of contents exit (no "CONTENTS"). This macro
1073 is called instead of printing CONTENTS. See TC.
1074 VERBON [flag [pointsize [font]]]
1076 Begin verbatim output using courier font. Usually for printing
1077 programs. All character has equal width. The pointsize can be
1078 changed with the second argument. By specifying the font-argu‐
1079 ment it is possible to use another font instead of courier.
1080 flag controls several special features. It contains the sum of
1081 all wanted features.
1082 ValueDescription
1083 1 Disable the escape-character (\). This is normally turned
1084 on during verbose output.
1085 2 Add an empty line before the verbose text.
1086 4 Add an empty line after the verbose text.
1087 8 Print the verbose text with numbered lines. This adds four
1088 digitsized spaces in the beginning of each line. Finer
1089 control is available with the string-variable Verbnm. It
1090 contains all arguments to the troff-command .nm, normally
1091 '1'.
1092 16 Indent the verbose text with five 'n':s. This is con‐
1093 trolled by the number-variable Verbin (in units).
1094 VERBOFF
1096 End verbatim output.
1097 VL text-indent [mark-indent [1]]
1099 Variable-item list has no fixed mark, it assumes that every LI
1100 have a mark instead. Text-indent sets the indent to the text,
1101 and mark-indent the distance from the current indent to the
1102 mark. A third argument will prohibit printing of a blank line
1103 before each item.
1104 VM [-T] [top [bottom]]
1106 Vertical margin. Adds extra vertical top and margin space.
1107 Option -T set the total space instead. No argument resets the
1108 margin to zero or the default (7v 5v) if -T was used. It is
1109 higly recommended that macro TP and/or EOP are defined if using
1110 -T and setting top and/or bottom margin to less than the
1111 default.
1112 WA [writer-name [title]]
1114 Begins specification of the writer and writer's address. Sev‐
1115 eral names can be specified with empty WA/WE-pairs, but only one
1116 address.
1117 WE Ends the address-specification after .WA.
1119 WC [format]
1121 Footnote and display width control.
1122 N Set default mode, -WF, -FF, -WD and FB.
1123 WF Wide footnotes, wide also in two-column mode.
1124 -WF Normal footnote width, follow column mode.
1125 FF All footnotes gets the same width as the first footnote
1126 encountered.
1127 -FF Normal footnotes, width follows WF and -WF.
1128 WD
1129 Wide displays, wide also in two-column mode.
1130 -WD Normal display width, follow column mode.
1131 FB Floating displays generates a line break when printed on
1132 the current page.
1133 -FB Floating displays does not generate line break.
1134 Strings used in mm:
1139 App A string containing the word "APPENDIX".
1141 Apptxt
1143 The current appendix text.
1145 EM Em dash string
1146 H1txt Will be updated by .H and .HU to the current heading text. Also
1148 updated in table of contents & friends.
1149 HF Fontlist for headings, normally "2 2 2 2 2 2 2". Nonnumeric
1151 fontnames may also be used.
1152 HP Pointsize list for headings. Normally "0 0 0 0 0 0 0" which is
1154 the same as "10 10 10 10 10 10 10".
1155 Index
1157 Contains INDEX.
1159 Indcmd
1160 Contains the index command, sort -t\t.
1162 Lifg String containing Figure.
1163 Litb String containing TABLE.
1165 Liex String containing Exhibit.
1167 Liec String containing Equation.
1169 Licon String containing CONTENTS.
1171 Lf Contains "LIST OF FIGURES".
1173 Lt Contains "LIST OF TABLES".
1175 Lx Contains "LIST OF EXHIBITS".
1177 Le Contains "LIST OF EQUATIONS".
1179 Letfc Contains "Yours very truly,", used in .FC.
1181 Letapp Contains "APPROVED:", used in .AV.
1183 Letdate
1185 Contains "Date", used in .AV.
1186 LetCN Contains "CONFIDENTIAL", used in .LO CN.
1188 LetSA Contains "To Whom It May Concern:", used in .LO SA.
1190 LetAT Contains "ATTENTION:", used in .LO AT.
1192 LetSJ Contains "SUBJECT:", used in .LO SJ.
1194 LetRN Contains "In reference to:", used in .LO RN.
1196 Letns is an array containing the different strings used in .NS. It is
1198 really a number of stringvariables prefixed with Letns!. If the
1199 argument doesn't exist, it will be included between () with
1200 Letns!copy as prefix and Letns!to as suffix. Observe the space
1201 after copy and before to.
1202 Name Value
1203 Letns!0 Copy to
1204 Letns!1 Copy (with att.) to
1205 Letns!2 Copy (without att.) to
1206 Letns!3 Att.
1207 Letns!4 Atts.
1208 Letns!5 Enc.
1209 Letns!6 Encs.
1210 Letns!7 Under separate cover
1211 Letns!8 Letter to
1212 Letns!9 Memorandum to
1213 Letns!10 Copy (with atts.) to
1214 Letns!11 Copy (without atts.) to
1215 Letns!12 Abstract Only to
1216 Letns!13 Complete Memorandum to
1217 Letns!14 CC
1218 Letns!copy Copy "
1219 Letns!to " to
1220 Letnsdef
1222 Defines the standard-notation used when no argument is given to
1223 .NS. Default is 0.
1224 MO1 - MO12
1226 Strings containing January thru December.
1227 Qrf String containing "See chapter \\*[Qrfh], page \\n[Qrfp].".
1229 Rp Contains "REFERENCES".
1231 Tcst Contains current status of table of contents and list of XXXX.
1233 Empty outside .TC. Useful in user-defined macros like .TP.
1234 Value Meaning
1235 co Table of contents
1236 fg List of figures
1237 tb List of tables
1238 ec List of equations
1239 ex List of exhibits
1240 ap Appendix
1241 Tm Contains \(tm, trade mark.
1243 Verbnm Argument to .nm in .VERBON, default: 1.
1245 Number variables used in mm:
1247 Aph Print an appendix-page for every new appendix if this number‐
1249 variable is non-zero. No output will occur if Aph is zero, but
1250 there will always be an appendix-entry in the 'List of con‐
1251 tents'.
1252 Cl Contents level [0:7], contents saved if heading level <= Cl,
1254 default 2.
1255 Cp Eject page between LIST OF XXXX if Cp == 0, default 0.
1257 D Debugflag, values >0 produces varying degree of debug. A value
1259 of 1 gives information about the progress of formatting,
1260 default 0.
1261 De Eject after floating display is output [0:1], default 0.
1263 Dsp Controls the space output before and after static displays if
1265 defined. Otherwise is the value of Lsp used.
1266 Df Floating keep output [0:5], default 5.
1268 Ds Lsp space before and after display if == 1 [0:1], default 1.
1270 Ej Eject page, default 0.
1272 Eq Equation lable adjust 0=left, 1=right. Default 0.
1274 Fs Footnote spacing, default 1.
1276 H1-H7 Heading counters
1278 H1dot Append a dot after the level one heading number if > 0. Default
1280 is 1.
1281 H1h
1283 Copy of number register H1, but it is incremented
1285 just before the page break. Useful in user defined header
1286 macros. Hb Heading break level [0:7], default 2.
1287 Hc Heading centering level, [0:7]. Default 0.
1289 Hi Heading temporary indent [0:2], default 1.
1291 0 -> 0 indent, left margin
1292 1 -> indent to right , like .P 1
1293 2 -> indent to line up with text part of preceding heading
1294 Hps Numbervariable with the heading pre-space level. If the head‐
1296 ing-level is less than or equal to Hps, then two lines will pre‐
1297 cede the section heading instead of one. Default is first level
1298 only. The real amount of lines is controlled by the variables
1299 Hps1 and Hps2.
1300 Hps1 This is the number of lines preceding .H when the heading-level
1302 is greater than Hps. Value is in units, normally 0.5.
1303 Hps2 This is the number of lines preceding .H when the heading-level
1305 is less than or equal to Hps. Value is in units, normally 1.
1306 Hs Heading space level [0:7], default 2.
1308 Hss This is the number of lines that follows .H when the heading-
1310 level is less than or equal to Hs. Value is in units, nor‐
1311 mally 1.
1312 Ht Heading numbering type, default 0. 0 -> multiple (1.1.1 ...)
1314 1 -> single
1315 Hu Unnumbered heading level, default 2.
1317 Hy Hyphenation in body, default 1.
1319 0 -> no hyphenation
1320 1 -> hyphenation 14 on
1321 Iso Set this variable to 1 on the command line to get ISO-formatted
1323 date string. (-rIso=1) Useless inside a document.
1324 L Page length, only for command line settings.
1326 Letwam Max lines in return-address, used in .WA/.WE. Default 14.
1328 Lf, Lt, Lx, Le
1330 Enables (1) or disables (0) the printing of List of figures,
1331 List of tables, List of exhibits and List of equations.
1332 Default: Lf=1, Lt=1, Lx=1, Le=0.
1333 Li List indent, used by .AL, default 6.
1335 Limsp Flag for space between prefix and mark in automatic lists (.AL).
1337 0 == no space
1338 1 == space
1339 Ls List space, if current listlevel > Ls then no spacing will occur
1341 around lists. Default 99.
1342 Lsp The size of an empty line. Normally 0.5v, but it is 1v if n is
1344 set (.nroff).
1345 N Numbering style [0:5], default 0.
1347 0 == (default) normal header for all pages.
1348 1 == header replaces footer on first page, header is empty.
1349 2 == page header is removed on the first page.
1350 3 == "section-page" numbering enabled.
1351 4 == page header is removed on the first page.
1352 5 == "section-page" and "section-figure" numbering enabled. See
1353 also the number-register Sectf and Sectp.
1354 Np Numbered paragraphs, default 0.
1356 0 == not numbered
1357 1 == numbered in first level headings.
1358 O Page offset, only for command line settings.
1360 Of Format of figure,table,exhibit,equation titles, default 0.
1362 0 = ". "
1363 1 = " - "
1364 P Current page-number, normally the same as % unless "section-
1366 page" numbering is enabled.
1367 Pi paragraph indent, default 5.
1369 Pgps Controls whether header and footer pointsize should follow the
1371 current setting or just change when the header and footer is
1372 defined.
1373 ValueDescription
1374 0 Pointsize will only change to the current setting when .PH,
1375 .PF, .OH, .EH, .OF or .OE is executed.
1376 1 Pointsize will change after every .S. This is the default.
1377 Ps paragraph spacing, default 1.
1379 Pt Paragraph type, default 0.
1381 0 == left-justified
1382 1 == indented .P
1383 2 == indented .P except after .H, .DE or .LE.
1384 Sectf Flag controlling "section-figures". A non-zero value enables
1386 this. See also register N.
1387 Sectp Flag controlling "section-page-numbers". A non-zero value
1389 enables this. See also register N.
1390 Si Display indent, default 5.
1392 Verbin Indent for .VERBON, default 5n.
1394 W Line length, only for command line settings.
1396 .mgm Always 1.
1398
1400 The letter macros is using different submacros depending on the letter
1401 type. The name of the submacro has the letter type as suffix. It is
1402 therefore possible to define other letter types, either in the national
1403 macro-file, or as local additions. .LT will set the number variables
1404 Pt and Pi to 0 and 5. The following strings and macros must be defined
1405 for a new letter type:
1406 let@init_type
1408 This macro is called directly by .LT. It is supposed to ini‐
1409 tialize variables and other stuff.
1410 let@head_type
1412 This macro prints the letter head, and is called instead of the
1413 normal page header. It is supposed to remove the alias
1414 let@header, otherwise it will be called for all pages.
1415 let@sg_type name title n flag [arg1 [arg2 [...]]]
1417 .SG is calling this macro only for letters, memorandums has its
1418 own processing. name and title is specified thru .WA/.WB. n is
1419 the counter, 1-max, and flag is true for the last name. Any
1420 other argument to .SG is appended.
1421 let@fc_type closing
1423 This macro is called by .FC, and has the formal closing as argu‐
1424 ment.
1425 .LO is implemented as a general option-macro. .LO demands that a
1427 string named Lettype is defined, where type is the letter type. .LO
1428 will then assign the argument to the string variable let*lo-type.
1429
1431 Jörgen Hägg, Lund, Sweden <jh@axis.se>.
1432
1434 /usr/share/groff/1.18.1.4/tmac/tmac.m
1435 /usr/share/groff/1.18.1.4/tmac/mm/*.cov
1437 /usr/share/groff/1.18.1.4/tmac/mm/*.MT
1439 /usr/share/groff/1.18.1.4/tmac/mm/locale
1441
1443 groff(1), troff(1), tbl(1), pic(1), eqn(1)
1444 groff_mmse(7)
1445Groff Version 1.18.1.4 25 January 2008 GROFF_MM(7)