1sendiso(1)                      Linux IEEE 1394                     sendiso(1)
2
3
4

NAME

6       sendiso - send IEEE 1394 isochronous packets from dump file
7

SYNOPSIS

9       sendiso [ options ] FILE
10

DESCRIPTION

12       sendiso  takes  the dump file FILE as generated by dumpiso(1), extracts
13       the packets and sends them as they were received (in  the  same  order,
14       with  the  same  channel  numbers)  as fast as possible - timing of the
15       original dump is not preserved.
16
17       This program does not  allocate  any  isochronous  resources  but  just
18       starts  sending.   It  should not be used in live environments where it
19       might interfere with properly set up isochronous transmissions, it is a
20       debug and performance benchmarking tool.
21

OPTIONS

23       -l, --loop=COUNT
24              Send dump file COUNT times.  Defaults to 1.
25
26       -i, --infinite
27              Send dump file in an endless loop.
28
29       -s, --speed=SPEED
30              Send  packets at speed SPEED, which can be given as 100, 200 and
31              400 (in Mbit/s) or abbreviated as 1, 2 and 4.  Defaults to 100.
32
33       -p, --port=PORT
34              Choose port PORT for sending.  A port is a 1394 card or chip and
35              represents  one  connected  bus, therefore this is only relevant
36              when you have multiple of these.  Defaults to 0.
37
38       -h, --help
39              Show help text and exit.
40

BUGS

42       None known.
43

SEE ALSO

45       dumpiso(1), isodump(5)
46

AUTHOR

48       Andreas Bombe <aeb@debian.org>
49
50
51
52                               libraw1394 2.0.4                     sendiso(1)