1TRIDENT(4)                 Kernel Interfaces Manual                 TRIDENT(4)
2
3
4

NAME

6       trident - Trident video driver
7

SYNOPSIS

9       Section "Device"
10         Identifier "devname"
11         Driver "trident"
12         ...
13       EndSection
14

DESCRIPTION

16       trident  is  an  Xorg  driver  for  Trident video cards.  The driver is
17       accelerated, and provides support for the following framebuffer depths:
18       1,  4, 8, 15, 16, and 24. Multi-head configurations are supported.  The
19       XvImage extension is supported on TGUI96xx and greater cards.
20

SUPPORTED HARDWARE

22       The trident driver supports PCI,AGP and ISA video cards  based  on  the
23       following Trident chips:
24
25       Blade       Blade3D,  CyberBlade  series  i1, i7 (DSTN), i1, i1 (DSTN),
26                   Ai1,    Ai1    (DSTN),     CyberBlade/e4,     CyberBladeXP,
27                   CyberBladeAi1/XP, BladeXP
28
29       Image       3DImage975,  3DImage985,  Cyber9520,  Cyber9525, Cyber9397,
30                   Cyber9397DVD
31
32       ProVidia    9682, 9685, Cyber9382, Cyber9385, Cyber9388
33
34       TGUI        9440AGi, 9660, 9680
35
36       ISA/VLBus   8900C, 8900D, 9000, 9200CXr,  Cyber9320,  9400CXi,  9440AGi
37                   These  cards  have been ported but need further testing and
38                   may not work.
39

CONFIGURATION DETAILS

41       Please refer to xorg.conf(5) for general configuration  details.   This
42       section only covers configuration details specific to this driver.
43
44       The following driver Options are supported:
45
46       Option "SWCursor" "boolean"
47              Enable or disable the SW cursor.  Default: off.
48
49       Option "NoAccel" "boolean"
50              Disable   or  enable  acceleration.   Default:  acceleration  is
51              enabled.
52
53       Option "PciRetry" "boolean"
54              Enable or disable PCI retries.  Default: off.
55
56       Option "CyberShadow" "boolean"
57              For Cyber chipsets only, turn off shadow registers. If you  only
58              see a partial display - this may be the option for you. Default:
59              on.
60
61       Option "CyberStretch" "boolean"
62              For Cyber chipsets only, turn on stretching. When the resolution
63              is  lower  than  the  LCD's screen, this option will stretch the
64              graphics mode to fill the entire LCD. Default: off.
65
66       Option "ShadowFB" "boolean"
67              Enable or disable use of the shadow framebuffer layer.  Default:
68              off.
69
70       Option "VideoKey" "integer"
71              This sets the default pixel value for the YUV video overlay key.
72              Default: undefined.
73
74       Option "TVChipset" "string"
75              This  sets  the  TV  chipset.  Options  are  CH7005  or  VT1621.
76              Default: off.
77
78       Option "TVSignal" "integer"
79              This  sets  the  TV  signalling. Options are 0 for NTSC or 1 for
80              PAL.  Default: undefined.
81
82       Option "NoPciBurst" "boolean"
83              Turn off  PCI  burst  mode,  PCI  Bursting  is  on  by  default.
84              Default: off.
85
86       Option "XvHsync" "integer"
87              Override the default Horizontal-sync value for the Xv extension.
88              This is used to center the Xv image on the screen.   By  default
89              the values are assigned based on the video card.  Default: 0.
90
91       Option "XvVsync" "integer"
92              Override  the  default Vertical-sync value for the Xv extension.
93              This is used to center the Xv image on the screen.   By  default
94              the values are assigned based on the video card.  Default: 0.
95
96       Option "XvBskew" "integer"
97              Override  the  default  Bottom  skew value for the Xv extension.
98              This is used to extend the Xv image on the screen at the bottom.
99              By  default  the  values  are  assigned based on the video card.
100              Default: 0.
101
102       Option "XvRskew" "integer"
103              Override the default Right skew  value  for  the  Xv  extension.
104              This  is used to extend the Xv image on the screen at the right.
105              By default the values are assigned  based  on  the  video  card.
106              Default: 0.
107
108       Option "Display" "string"
109              Override  the  display.   Possible  values  are "CRT", "LCD" and
110              "Dual".  Please note that this option  is  only  experimentally.
111              Default: Use display active when X started.
112
113       Option "Display1400" "boolean"
114              Inform   driver   to  expect  1400x1050  display  instead  of  a
115              1280x1024.  Default: off.
116
117       Option "GammaBrightness" "string"
118              Set display gamma value  and  brightness.  "string"  is  "gamma,
119              brightness",  where gamma is a floating point value greater than
120              0 and less or equal  to  10.  brightness  is  an  integer  value
121              greater  or  equal  to  0 and less than 128.  Default: gamma and
122              brightness control is turned off.  Note: This is  not  supported
123              on all chipsets.  Option "AccelMethod" "string" Choose accelera‐
124              tion architecture, either "XAA" or "EXA".  XAA is the  old  (but
125              stable) XFree86 based acceleration architecture.  EXA is a newer
126              and simpler acceleration architecture designed to better  accel‐
127              erate the X Render extension.  Default: "XAA".
128

SEE ALSO

130       Xorg(1), xorg.conf(5), Xserver(1), X(7)
131

AUTHOR

133       Author: Alan Hourihane, EXA for Blade chips by Jesse Barnes
134
135
136
137X Version 11               xf86-video-trident 1.3.6                 TRIDENT(4)