1condor_collector_selinux(S8E)Linux Policy condor_collecctoonrdor_collector_selinux(8)
2
3
4
6 condor_collector_selinux - Security Enhanced Linux Policy for the con‐
7 dor_collector processes
8
10 Security-Enhanced Linux secures the condor_collector processes via
11 flexible mandatory access control.
12
13 The condor_collector processes execute with the condor_collector_t
14 SELinux type. You can check if you have these processes running by exe‐
15 cuting the ps command with the -Z qualifier.
16
17 For example:
18
19 ps -eZ | grep condor_collector_t
20
21
22
24 The condor_collector_t SELinux type can be entered via the file_type,
25 unlabeled_t, proc_type, filesystem_type, mtrr_device_t, sysctl_type,
26 condor_collector_exec_t file types.
27
28 The default entrypoint paths for the condor_collector_t domain are the
29 following:
30
31 all files on the system, /dev/cpu/mtrr, /usr/sbin/condor_collector
32
34 SELinux defines process types (domains) for each process running on the
35 system
36
37 You can see the context of a process using the -Z option to ps
38
39 Policy governs the access confined processes have to files. SELinux
40 condor_collector policy is very flexible allowing users to setup their
41 condor_collector processes in as secure a method as possible.
42
43 The following process types are defined for condor_collector:
44
45 condor_collector_t
46
47 Note: semanage permissive -a condor_collector_t can be used to make the
48 process type condor_collector_t permissive. SELinux does not deny
49 access to permissive process types, but the AVC (SELinux denials) mes‐
50 sages are still generated.
51
52
54 SELinux policy is customizable based on least access required. con‐
55 dor_collector policy is extremely flexible and has several booleans
56 that allow you to manipulate the policy and run condor_collector with
57 the tightest access possible.
58
59
60
61 If you want to allow all daemons to write corefiles to /, you must turn
62 on the allow_daemons_dump_core boolean. Disabled by default.
63
64 setsebool -P allow_daemons_dump_core 1
65
66
67
68 If you want to allow all daemons to use tcp wrappers, you must turn on
69 the allow_daemons_use_tcp_wrapper boolean. Disabled by default.
70
71 setsebool -P allow_daemons_use_tcp_wrapper 1
72
73
74
75 If you want to allow all daemons the ability to read/write terminals,
76 you must turn on the allow_daemons_use_tty boolean. Disabled by
77 default.
78
79 setsebool -P allow_daemons_use_tty 1
80
81
82
83 If you want to allow all domains to use other domains file descriptors,
84 you must turn on the allow_domain_fd_use boolean. Enabled by default.
85
86 setsebool -P allow_domain_fd_use 1
87
88
89
90 If you want to allow unconfined executables to make their heap memory
91 executable. Doing this is a really bad idea. Probably indicates a
92 badly coded executable, but could indicate an attack. This executable
93 should be reported in bugzilla, you must turn on the allow_execheap
94 boolean. Disabled by default.
95
96 setsebool -P allow_execheap 1
97
98
99
100 If you want to allow unconfined executables to map a memory region as
101 both executable and writable, this is dangerous and the executable
102 should be reported in bugzilla), you must turn on the allow_execmem
103 boolean. Enabled by default.
104
105 setsebool -P allow_execmem 1
106
107
108
109 If you want to allow all unconfined executables to use libraries
110 requiring text relocation that are not labeled textrel_shlib_t), you
111 must turn on the allow_execmod boolean. Enabled by default.
112
113 setsebool -P allow_execmod 1
114
115
116
117 If you want to allow unconfined executables to make their stack exe‐
118 cutable. This should never, ever be necessary. Probably indicates a
119 badly coded executable, but could indicate an attack. This executable
120 should be reported in bugzilla), you must turn on the allow_execstack
121 boolean. Enabled by default.
122
123 setsebool -P allow_execstack 1
124
125
126
127 If you want to allow confined applications to run with kerberos, you
128 must turn on the allow_kerberos boolean. Enabled by default.
129
130 setsebool -P allow_kerberos 1
131
132
133
134 If you want to allow sysadm to debug or ptrace all processes, you must
135 turn on the allow_ptrace boolean. Disabled by default.
136
137 setsebool -P allow_ptrace 1
138
139
140
141 If you want to allow system to run with NIS, you must turn on the
142 allow_ypbind boolean. Disabled by default.
143
144 setsebool -P allow_ypbind 1
145
146
147
148 If you want to allow codnor domain to connect to the network using TCP,
149 you must turn on the condor_domain_can_network_connect boolean. Dis‐
150 abled by default.
151
152 setsebool -P condor_domain_can_network_connect 1
153
154
155
156 If you want to enable cluster mode for daemons, you must turn on the
157 daemons_enable_cluster_mode boolean. Disabled by default.
158
159 setsebool -P daemons_enable_cluster_mode 1
160
161
162
163 If you want to allow all domains to have the kernel load modules, you
164 must turn on the domain_kernel_load_modules boolean. Disabled by
165 default.
166
167 setsebool -P domain_kernel_load_modules 1
168
169
170
171 If you want to allow all domains to execute in fips_mode, you must turn
172 on the fips_mode boolean. Enabled by default.
173
174 setsebool -P fips_mode 1
175
176
177
178 If you want to enable reading of urandom for all domains, you must turn
179 on the global_ssp boolean. Disabled by default.
180
181 setsebool -P global_ssp 1
182
183
184
185 If you want to enable support for upstart as the init program, you must
186 turn on the init_upstart boolean. Enabled by default.
187
188 setsebool -P init_upstart 1
189
190
191
192 If you want to allow certain domains to map low memory in the kernel,
193 you must turn on the mmap_low_allowed boolean. Disabled by default.
194
195 setsebool -P mmap_low_allowed 1
196
197
198
199 If you want to allow confined applications to use nscd shared memory,
200 you must turn on the nscd_use_shm boolean. Enabled by default.
201
202 setsebool -P nscd_use_shm 1
203
204
205
206 If you want to boolean to determine whether the system permits loading
207 policy, setting enforcing mode, and changing boolean values. Set this
208 to true and you have to reboot to set it back, you must turn on the
209 secure_mode_policyload boolean. Disabled by default.
210
211 setsebool -P secure_mode_policyload 1
212
213
214
215 If you want to support X userspace object manager, you must turn on the
216 xserver_object_manager boolean. Disabled by default.
217
218 setsebool -P xserver_object_manager 1
219
220
221
223 The SELinux process type condor_collector_t can manage files labeled
224 with the following file types. The paths listed are the default paths
225 for these file types. Note the processes UID still need to have DAC
226 permissions.
227
228 file_type
229
230 all files on the system
231
232
234 SELinux requires files to have an extended attribute to define the file
235 type.
236
237 You can see the context of a file using the -Z option to ls
238
239 Policy governs the access confined processes have to these files.
240 SELinux condor_collector policy is very flexible allowing users to set‐
241 up their condor_collector processes in as secure a method as possible.
242
243 The following file types are defined for condor_collector:
244
245
246
247 condor_collector_exec_t
248
249 - Set files with the condor_collector_exec_t type, if you want to tran‐
250 sition an executable to the condor_collector_t domain.
251
252
253
254 Note: File context can be temporarily modified with the chcon command.
255 If you want to permanently change the file context you need to use the
256 semanage fcontext command. This will modify the SELinux labeling data‐
257 base. You will need to use restorecon to apply the labels.
258
259
261 semanage fcontext can also be used to manipulate default file context
262 mappings.
263
264 semanage permissive can also be used to manipulate whether or not a
265 process type is permissive.
266
267 semanage module can also be used to enable/disable/install/remove pol‐
268 icy modules.
269
270 semanage boolean can also be used to manipulate the booleans
271
272
273 system-config-selinux is a GUI tool available to customize SELinux pol‐
274 icy settings.
275
276
278 This manual page was auto-generated using sepolicy manpage .
279
280
282 selinux(8), condor_collector(8), semanage(8), restorecon(8), chcon(1) ,
283 setsebool(8)
284
285
286
287condor_collector 15-06-03 condor_collector_selinux(8)