1avahi-autoipd(8) System Manager's Manual avahi-autoipd(8)
2
3
4
6 avahi-autoipd - IPv4LL network address configuration daemon
7
9 avahi-autoipd [options] interface
10
11 avahi-autoipd --kill interface
12
13 avahi-autoipd --refresh interface
14
15 avahi-autoipd --check interface
16
18 avahi-autoipd implements IPv4LL, "Dynamic Configuration of IPv4 Link-
19 Local Addresses" (IETF RFC3927), a protocol for automatic IP address
20 configuration from the link-local 169.254.0.0/16 range without the need
21 for a central server. It is primarily intended to be used in ad-hoc
22 networks which lack a DHCP server.
23
24 IPv4LL is part of the Zeroconf stack.
25
26 avahi-autoipd can be used as stand-alone address allocator or as plugin
27 for a DHCP client such as ISC's dhclient, where it can be used as fall‐
28 back solution if no DHCP server is found.
29
30 To allow communication between hosts that have only an IPv4LL address
31 assigned and hosts that only have a routable IP address assigned you
32 may add the following routes to both network configurations:
33
34 route add -net 169.254.0.0 netmask 255.255.0.0 dev eth0 metric 99
35
36 route add default dev eth0 metric 99
37
38 See http://developer.apple.com/qa/qa2004/qa1357.html for more informa‐
39 tion.
40
42 -D | --daemonize
43 Daemonize after startup. Implies --syslog.
44
45 -k | --kill
46 Kill an already running avahi-autoipd on the specified network
47 interface. (Equivalent to sending a SIGTERM)
48
49 -r | --refresh
50 Tell an already running avahi-autoipd to re-announce the
51 acquired IP address on the specified network interface. (Equiva‐
52 lent to sending a SIGHUP)
53
54 -c | --check
55 Return 0 as return code if avahi-autoipd is already running for
56 the specified network interface.
57
58 -s | --syslog
59 Log to syslog instead of STDERR. Implied by --daemonize.
60
61 --debug
62 Enable verbose mode.
63
64 --no-drop-root
65 Don't drop root privileges after startup. We recommend not to
66 use this option.
67
68 --no-chroot
69 Don't chroot(2) the daemon. This option is only available when
70 compiled with chroot() support.
71
72 -S | --start=
73 Try to acquire the specified IP address, which must be from the
74 IPv4LL range 169.254.0.0/16.
75
76 -w | --wait
77 Wait until a IP address has been successfully acquired before
78 detaching. Only valid in combination with --daemonize.
79
80 --force-bind
81 Acquire an IPv4LL address, even if a routable address has been
82 configured on the interface.
83
84 -t | --script
85 Action script to run (defaults to /etc/avahi/avahi-
86 autoipd.action). See autoipd.action(8) for more details.
87
88 --no-proc-title
89 Don't change the process name while running. Unless this option
90 is specified avahi-autoipd will reflect its current state and
91 the IP address in the process title.
92
93 -h | --help
94 Show help.
95
96 -V | --version
97 Show version information.
98
100 /etc/avahi/avahi-autoipd.action: the script to run when an IP address
101 as been acquired or is lost.
102
104 SIGINT, SIGTERM: avahi-autoipd will shutdown. (Same as --kill)
105
106 SIGHUP: avahi-autoipd will re-announce the acquired IP address. (Same
107 as --refresh)
108
110 The Avahi Developers <avahi (at) lists (dot) freedesktop (dot) org>;
111 Avahi is available from http://avahi.org/
112
114 autoipd.action(8), dhclient(8)
115
116 http://avahi.org/wiki/AvahiAutoipd documents how avahi-autoipd is best
117 packaged and integrated into distributions.
118
120 This man page was written using xml2man(1) by Oliver Kurth.
121
122
123
124Manuals User avahi-autoipd(8)