1opafmcmdall(8) Master map: IFSFFCLIRG (Man Page) opafmcmdall(8)
3
7 opafmcmdall
8 Executes a command to all instances of the Fabric Manager (FM) listed
12 in the options. The behavior is similar to opafmcmd.
13
15 opafmcmdall [-i fm_instance] cmd[ args]
16
18 --help Produces full help text.
19 -i fm_instance
22 Specifies the FM instance number (0-7) to act on.
23 Specify multiple -i options as needed. Default = all
26 instances.
27 cmd [args]
29 Specifies the commands and arguments (if applicable) to be
30 run. Values include:
31 smForceSweep
36 Makes the Subnet Manager (SM) sweep now.
37 smRestorePriority
43 Restores the normal priority of the SM, if it is
44 currently elevated.
45 smShowCounters
51 Gets statistics and performance counters from the
52 SM.
53 smResetCounters
59 Resets SM statistics and performance counters.
60 smStateDump
66 Dumps internal SM state into specified directory.
67 smLogLevel
73 Sets the SM logging level. Values include:
74 · 0=NONE+
77 · 1=WARN+
79 · 2=NOTICE+
81 · 3=INFO+
83 · 4=VERBOSE+
85 · 5=DEBUG2+
87 · 6=DEBUG4+
89 · 7=TRACE+
91 smLogMode Sets the SM log mode flags. Values include:
99 · 0/1 1=downgrade non-actionable
102 · 0/2 2=logfile only
104 smLogMask Sets the SM log mask for a specific subsystem to
112 the value given. For a list of subsystems and mask
113 bit meanings, see the files /etc/opa-fm/opafm.xml
114 or /usr/share/opa-fm/opafm.xml.
115 smPerfDebug
121 Toggles performance debug output for SM.
122 saPerfDebug
128 Toggles performance debug output for Subnet Admin‐
129 istration (SA).
130 saRmppDebug
136 Toggles Reliable Message Passing Protocol (RMPP)
137 debug output for SA.
138 pmShowCounters
144 Gets statistics and performance counters for the
145 Performance Manager (PM).
146 pmResetCounters
152 Resets statistics and performance counters for the
153 PM.
154 pmDebug Toggles debug output for PM.
160 pmRmppDebug
166 Toggles RMPP debug output for PM.
167 feLogLevel
173 Sets the Fabric Executive (FE) logging level. Val‐
174 ues include:
175 · 0=NONE+
178 · 1=WARN+
180 · 2=NOTICE+
182 · 3=INFO+
184 · 4=VERBOSE+
186 · 5=DEBUG2+
188 · 6=DEBUG4+
190 · 7=TRACE+
192 feLogMode Sets the FE log mode flags.
200 · 0/1 1=downgrade non-actionable
203 · 0/2 2=logfile only
205 feLogMask Sets the FE log mask for a specific subsystem to
213 the value given. For a list of subsystems and mask
214 bit meanings, see the files /etc/opa-fm/opafm.xml
215 or /usr/share/opa-fm/opafm.xml
216 feDebug Toggles debug output for FE.
222 feRmppDebug
228 Toggles RMPP debug output for FE.
229 smLooptestStart
235 Starts loop test in normal mode. Specify the number
236 of 256 byte packets. Default = 0.
237 smLooptestFastModeStart
243 Starts loop test in fast mode. Specify the number
244 of 256 byte packets. Default = 5.
245 smLooptestStop
251 Stops loop test. Returns switch LFTs back to nor‐
252 mal.
253 smLooptestInjectPackets
259 Enter numPkts to send to all switch loops. Default
260 = 1.
261 smLooptestInjectAtNode
267 Enter the switch node index to inject loop packets.
268 Default = 0.
269 smLooptestInjectEachSweep
275 Sets whether to inject or stop injecting packets
276 each sweep.
277 · Enter 1 to inject packets each sweep.
280 · Enter 0 to stop injecting each sweep.
282 smLooptestPathLength
290 Sets the loop path length. Range = 2 - 4. Default =
291 3.
292 smLooptestMinISLRedundancy
298 Sets the minimum number of loops in which to
299 include each ISL. Default = 4.
300 smLooptestShowLoopPaths
306 Displays the loop paths given node index or all
307 loop paths. Default = all.
308 smLooptestShowSwitchLft
314 Displays a switch LFT given node index or all
315 switches LFTs. Default = all.
316 smLooptestShowTopology
322 Displays the topology for the SM Loop Test.
323 smLooptestShowConfig
329 Displays the current active loop configuration.
330 smForceRebalance
336 Toggles Force Rebalance setting for SM.
337 smAdaptiveRouting
343 Displays or modifies Adaptive Routing setting for
344 SM. If no arguments are entered, displays current
345 setting. Enter 0 to Disable. Enter 1 to Enable.
346 smForceAttributeRewrite
352 Sets rewriting of all attributes upon resweeping.
353 · Enter 0 to Disable.
356 · Enter 1 to Enable.
358 smSkipAttrWrite
366 Specifies the bitmask of attributes to be skipped
367 (not written) during sweeps. Enter -help for list
368 of options.
369 smPauseSweeps
375 Pauses SM sweeps.
376 smResumeSweeps
382 Resumes SM sweeps.
383
387 opafmcmdall smForceSweep
388 # sends command to all FMs
389 opafmcmdall -i 2 -i 4 smLogLevel 3
391 # sends command to only FM2 and FM4
392Copyright(C) 2015-2018 Intel Corporation opafmcmdall(8)