openct_selinux(8)

1openct_selinux(8)            SELinux Policy openct           openct_selinux(8)
2
3
4

NAME

6       openct_selinux  -  Security  Enhanced  Linux Policy for the openct pro‐
7       cesses
8

DESCRIPTION

10       Security-Enhanced Linux  secures  the  openct  processes  via  flexible
11       mandatory access control.
12
13       The  openct  processes  execute with the openct_t SELinux type. You can
14       check if you have these processes running by executing the  ps  command
15       with the -Z qualifier.
16
17       For example:
18
19       ps -eZ | grep openct_t
20
21
22

ENTRYPOINTS

24       The  openct_t  SELinux  type  can be entered via the openct_exec_t file
25       type.
26
27       The default entrypoint paths for the openct_t domain are the following:
28
29       /usr/sbin/ifdhandler, /usr/sbin/openct-control
30

PROCESS TYPES

32       SELinux defines process types (domains) for each process running on the
33       system
34
35       You can see the context of a process using the -Z option to ps
36
37       Policy  governs  the  access confined processes have to files.  SELinux
38       openct policy is very flexible allowing users  to  setup  their  openct
39       processes in as secure a method as possible.
40
41       The following process types are defined for openct:
42
43       openct_t
44
45       Note:  semanage  permissive -a openct_t can be used to make the process
46       type openct_t permissive. SELinux does not deny  access  to  permissive
47       process  types, but the AVC (SELinux denials) messages are still gener‐
48       ated.
49
50

BOOLEANS

52       SELinux policy is customizable based on least access required.   openct
53       policy is extremely flexible and has several booleans that allow you to
54       manipulate the policy and run openct with the tightest access possible.
55
56
57
58       If you want to allow all daemons to write corefiles to /, you must turn
59       on the daemons_dump_core boolean. Disabled by default.
60
61       setsebool -P daemons_dump_core 1
62
63
64
65       If  you  want  to enable cluster mode for daemons, you must turn on the
66       daemons_enable_cluster_mode boolean. Enabled by default.
67
68       setsebool -P daemons_enable_cluster_mode 1
69
70
71
72       If you want to allow all daemons to use tcp wrappers, you must turn  on
73       the daemons_use_tcp_wrapper boolean. Disabled by default.
74
75       setsebool -P daemons_use_tcp_wrapper 1
76
77
78
79       If  you  want to allow all daemons the ability to read/write terminals,
80       you must turn on the daemons_use_tty boolean. Disabled by default.
81
82       setsebool -P daemons_use_tty 1
83
84
85
86       If you want to deny any process from ptracing or  debugging  any  other
87       processes,  you  must  turn  on  the  deny_ptrace  boolean.  Enabled by
88       default.
89
90       setsebool -P deny_ptrace 1
91
92
93
94       If you want to allow any process  to  mmap  any  file  on  system  with
95       attribute  file_type,  you must turn on the domain_can_mmap_files bool‐
96       ean. Enabled by default.
97
98       setsebool -P domain_can_mmap_files 1
99
100
101
102       If you want to allow all domains write to kmsg_device, while kernel  is
103       executed  with  systemd.log_target=kmsg parameter, you must turn on the
104       domain_can_write_kmsg boolean. Disabled by default.
105
106       setsebool -P domain_can_write_kmsg 1
107
108
109
110       If you want to allow all domains to use other domains file descriptors,
111       you must turn on the domain_fd_use boolean. Enabled by default.
112
113       setsebool -P domain_fd_use 1
114
115
116
117       If  you  want to allow all domains to have the kernel load modules, you
118       must  turn  on  the  domain_kernel_load_modules  boolean.  Disabled  by
119       default.
120
121       setsebool -P domain_kernel_load_modules 1
122
123
124
125       If you want to allow all domains to execute in fips_mode, you must turn
126       on the fips_mode boolean. Enabled by default.
127
128       setsebool -P fips_mode 1
129
130
131
132       If you want to enable reading of urandom for all domains, you must turn
133       on the global_ssp boolean. Disabled by default.
134
135       setsebool -P global_ssp 1
136
137
138

MANAGED FILES

140       The  SELinux  process  type  openct_t can manage files labeled with the
141       following file types.  The paths listed are the default paths for these
142       file types.  Note the processes UID still need to have DAC permissions.
143
144       cluster_conf_t
145
146            /etc/cluster(/.*)?
147
148       cluster_var_lib_t
149
150            /var/lib/pcsd(/.*)?
151            /var/lib/cluster(/.*)?
152            /var/lib/openais(/.*)?
153            /var/lib/pengine(/.*)?
154            /var/lib/corosync(/.*)?
155            /usr/lib/heartbeat(/.*)?
156            /var/lib/heartbeat(/.*)?
157            /var/lib/pacemaker(/.*)?
158
159       cluster_var_run_t
160
161            /var/run/crm(/.*)?
162            /var/run/cman_.*
163            /var/run/rsctmp(/.*)?
164            /var/run/aisexec.*
165            /var/run/heartbeat(/.*)?
166            /var/run/corosync-qnetd(/.*)?
167            /var/run/corosync-qdevice(/.*)?
168            /var/run/cpglockd.pid
169            /var/run/corosync.pid
170            /var/run/rgmanager.pid
171            /var/run/cluster/rgmanager.sk
172
173       openct_var_run_t
174
175            /var/run/openct(/.*)?
176
177       root_t
178
179            /sysroot/ostree/deploy/.*-atomic.*/deploy(/.*)?
180            /
181            /initrd
182
183       usbfs_t
184
185
186

FILE CONTEXTS

188       SELinux requires files to have an extended attribute to define the file
189       type.
190
191       You can see the context of a file using the -Z option to ls
192
193       Policy governs the access  confined  processes  have  to  these  files.
194       SELinux  openct  policy  is very flexible allowing users to setup their
195       openct processes in as secure a method as possible.
196
197       STANDARD FILE CONTEXT
198
199       SELinux defines the file context types for the openct, if you wanted to
200       store  files  with  these types in a diffent paths, you need to execute
201       the semanage command  to  sepecify  alternate  labeling  and  then  use
202       restorecon to put the labels on disk.
203
204       semanage fcontext -a -t openct_var_run_t '/srv/myopenct_content(/.*)?'
205       restorecon -R -v /srv/myopenct_content
206
207       Note:  SELinux  often  uses  regular expressions to specify labels that
208       match multiple files.
209
210       The following file types are defined for openct:
211
212
213
214       openct_exec_t
215
216       - Set files with the openct_exec_t type, if you want to  transition  an
217       executable to the openct_t domain.
218
219
220       Paths:
221            /usr/sbin/ifdhandler, /usr/sbin/openct-control
222
223
224       openct_initrc_exec_t
225
226       -  Set files with the openct_initrc_exec_t type, if you want to transi‐
227       tion an executable to the openct_initrc_t domain.
228
229
230
231       openct_var_run_t
232
233       - Set files with the openct_var_run_t type, if you want  to  store  the
234       openct files under the /run or /var/run directory.
235
236
237
238       Note:  File context can be temporarily modified with the chcon command.
239       If you want to permanently change the file context you need to use  the
240       semanage fcontext command.  This will modify the SELinux labeling data‐
241       base.  You will need to use restorecon to apply the labels.
242
243

COMMANDS

245       semanage fcontext can also be used to manipulate default  file  context
246       mappings.
247
248       semanage  permissive  can  also  be used to manipulate whether or not a
249       process type is permissive.
250
251       semanage module can also be used to enable/disable/install/remove  pol‐
252       icy modules.
253
254       semanage boolean can also be used to manipulate the booleans
255
256
257       system-config-selinux is a GUI tool available to customize SELinux pol‐
258       icy settings.
259
260

AUTHOR

262       This manual page was auto-generated using sepolicy manpage .
263
264