1opafmcmd(8) Master map: IFSFFCLIRG (Man Page) opafmcmd(8)
3
7 opafmcmd
8 Executes a command to a specific instance of the Fabric Manager (FM).
12 This command can be used, for example, to query the configuration
13 attributes of a particular instance of an FM as well as issue subnet
14 management commands.
15
17 opafmcmd [-i fm_instance] cmd [ args]
18
20 --help Produces full help text.
21 -i fm_instance
24 Specifies the number of the FM instance to act on.
25 Range = 0 to 7. Default = 0.
28 cmd [args]
30 Specifies the commands and arguments (if applicable) to be
31 run. Values include:
32 smForceSweep
37 Makes the Subnet Manager (SM) sweep now.
38 smRestorePriority
44 Restores the normal priority of the SM, if it is
45 currently elevated.
46 smShowCounters
52 Gets statistics and performance counters from the
53 SM.
54 smResetCounters
60 Resets SM statistics and performance counters.
61 smStateDump
67 Dumps internal SM state into specified directory.
68 smLogLevel
74 Sets the SM logging level. Values include:
75 · 0=NONE+
78 · 1=WARN+
80 · 2=NOTICE+
82 · 3=INFO+
84 · 4=VERBOSE+
86 · 5=DEBUG2+
88 · 6=DEBUG4+
90 · 7=TRACE+
92 smLogMode Sets the SM log mode flags. Values include:
100 · 0/1 1=downgrade non-actionable
103 · 0/2 2=logfile only
105 smLogMask Sets the SM log mask for a specific subsystem to
113 the value given. For a list of subsystems and mask
114 bit meanings, see the files /etc/opa-fm/opafm.xml
115 or /usr/share/opa-fm/opafm.xml.
116 smPerfDebug
122 Toggles performance debug output for SM.
123 saPerfDebug
129 Toggles performance debug output for Subnet Admin‐
130 istration (SA).
131 saRmppDebug
137 Toggles Reliable Message Passing Protocol (RMPP)
138 debug output for SA.
139 pmShowCounters
145 Gets statistics and performance counters for the
146 Performance Manager (PM).
147 pmResetCounters
153 Resets statistics and performance counters for the
154 PM.
155 pmDebug Toggles debug output for PM.
161 pmRmppDebug
167 Toggles RMPP debug output for PM.
168 feLogLevel
174 Sets the Fabric Executive (FE) logging level. Val‐
175 ues include:
176 · 0=NONE+
179 · 1=WARN+
181 · 2=NOTICE+
183 · 3=INFO+
185 · 4=VERBOSE+
187 · 5=DEBUG2+
189 · 6=DEBUG4+
191 · 7=TRACE+
193 feLogMode Sets the FE log mode flags.
201 · 0/1 1=downgrade non-actionable
204 · 0/2 2=logfile only
206 feLogMask Sets the FE log mask for a specific subsystem to
214 the value given. For a list of subsystems and mask
215 bit meanings, see the files /etc/opa-fm/opafm.xml
216 or /usr/share/opa-fm/opafm.xml
217 feDebug Toggles debug output for FE.
223 feRmppDebug
229 Toggles RMPP debug output for FE.
230 smLooptestStart
236 Starts loop test in normal mode. Specify the number
237 of 256 byte packets. Default = 0.
238 smLooptestFastModeStart
244 Starts loop test in fast mode. Specify the number
245 of 256 byte packets. Default = 5.
246 smLooptestStop
252 Stops loop test. Returns switch LFTs back to nor‐
253 mal.
254 smLooptestInjectPackets
260 Enter numPkts to send to all switch loops. Default
261 = 1.
262 smLooptestInjectAtNode
268 Enter the switch node index to inject loop packets.
269 Default = 0.
270 smLooptestInjectEachSweep
276 Sets whether to inject or stop injecting packets
277 each sweep.
278 · Enter 1 to inject packets each sweep.
281 · Enter 0 to stop injecting each sweep.
283 smLooptestPathLength
291 Sets the loop path length. Range = 2 - 4. Default =
292 3.
293 smLooptestMinISLRedundancy
299 Sets the minimum number of loops in which to
300 include each ISL. Default = 4.
301 smLooptestShowLoopPaths
307 Displays the loop paths given node index or all
308 loop paths. Default = all.
309 smLooptestShowSwitchLft
315 Displays a switch LFT given node index or all
316 switches LFTs. Default = all.
317 smLooptestShowTopology
323 Displays the topology for the SM Loop Test.
324 smLooptestShowConfig
330 Displays the current active loop configuration.
331 smForceRebalance
337 Toggles Force Rebalance setting for SM.
338 smAdaptiveRouting
344 Displays or modifies Adaptive Routing setting for
345 SM. If no arguments are entered, displays current
346 setting. Enter 0 to Disable. Enter 1 to Enable.
347 smForceAttributeRewrite
353 Sets rewriting of all attributes upon resweeping.
354 · Enter 0 to Disable.
357 · Enter 1 to Enable.
359 smSkipAttrWrite
367 Specifies the bitmask of attributes to be skipped
368 (not written) during sweeps. Enter -help for list
369 of options.
370 smPauseSweeps
376 Pauses SM sweeps.
377 smResumeSweeps
383 Resumes SM sweeps.
384
388 opafmcmd smForceSweep
389 opafmcmd -i 2 smLogLevel 3
390Copyright(C) 2015-2018 Intel Corporation opafmcmd(8)