pcp_pmproxy_selinux(8)

1pcp_pmproxy_selinux(8)    SELinux Policy pcp_pmproxy    pcp_pmproxy_selinux(8)
2
3
4

NAME

6       pcp_pmproxy_selinux   -   Security   Enhanced   Linux  Policy  for  the
7       pcp_pmproxy processes
8

DESCRIPTION

10       Security-Enhanced Linux secures the pcp_pmproxy processes via  flexible
11       mandatory access control.
12
13       The  pcp_pmproxy processes execute with the pcp_pmproxy_t SELinux type.
14       You can check if you have these processes running by executing  the  ps
15       command with the -Z qualifier.
16
17       For example:
18
19       ps -eZ | grep pcp_pmproxy_t
20
21
22

ENTRYPOINTS

24       The    pcp_pmproxy_t    SELinux   type   can   be   entered   via   the
25       pcp_pmproxy_exec_t file type.
26
27       The default entrypoint paths for the pcp_pmproxy_t domain are the  fol‐
28       lowing:
29
30       /usr/bin/pmproxy, /usr/libexec/pcp/bin/pmproxy
31

PROCESS TYPES

33       SELinux defines process types (domains) for each process running on the
34       system
35
36       You can see the context of a process using the -Z option to ps
37
38       Policy governs the access confined processes have  to  files.   SELinux
39       pcp_pmproxy  policy  is  very  flexible  allowing  users to setup their
40       pcp_pmproxy processes in as secure a method as possible.
41
42       The following process types are defined for pcp_pmproxy:
43
44       pcp_pmproxy_t
45
46       Note: semanage permissive -a pcp_pmproxy_t can  be  used  to  make  the
47       process  type pcp_pmproxy_t permissive. SELinux does not deny access to
48       permissive process types, but the AVC (SELinux  denials)  messages  are
49       still generated.
50
51

BOOLEANS

53       SELinux   policy  is  customizable  based  on  least  access  required.
54       pcp_pmproxy policy is extremely flexible and has several booleans  that
55       allow  you to manipulate the policy and run pcp_pmproxy with the tight‐
56       est access possible.
57
58
59
60       If you want to allow users to resolve user passwd entries directly from
61       ldap  rather  then  using  a  sssd server, you must turn on the authlo‐
62       gin_nsswitch_use_ldap boolean. Disabled by default.
63
64       setsebool -P authlogin_nsswitch_use_ldap 1
65
66
67
68       If you want to allow all daemons to write corefiles to /, you must turn
69       on the daemons_dump_core boolean. Disabled by default.
70
71       setsebool -P daemons_dump_core 1
72
73
74
75       If  you  want  to enable cluster mode for daemons, you must turn on the
76       daemons_enable_cluster_mode boolean. Enabled by default.
77
78       setsebool -P daemons_enable_cluster_mode 1
79
80
81
82       If you want to allow all daemons to use tcp wrappers, you must turn  on
83       the daemons_use_tcp_wrapper boolean. Disabled by default.
84
85       setsebool -P daemons_use_tcp_wrapper 1
86
87
88
89       If  you  want to allow all daemons the ability to read/write terminals,
90       you must turn on the daemons_use_tty boolean. Disabled by default.
91
92       setsebool -P daemons_use_tty 1
93
94
95
96       If you want to deny any process from ptracing or  debugging  any  other
97       processes,  you  must  turn  on  the  deny_ptrace  boolean.  Enabled by
98       default.
99
100       setsebool -P deny_ptrace 1
101
102
103
104       If you want to allow any process  to  mmap  any  file  on  system  with
105       attribute  file_type,  you must turn on the domain_can_mmap_files bool‐
106       ean. Enabled by default.
107
108       setsebool -P domain_can_mmap_files 1
109
110
111
112       If you want to allow all domains write to kmsg_device, while kernel  is
113       executed  with  systemd.log_target=kmsg parameter, you must turn on the
114       domain_can_write_kmsg boolean. Disabled by default.
115
116       setsebool -P domain_can_write_kmsg 1
117
118
119
120       If you want to allow all domains to use other domains file descriptors,
121       you must turn on the domain_fd_use boolean. Enabled by default.
122
123       setsebool -P domain_fd_use 1
124
125
126
127       If  you  want to allow all domains to have the kernel load modules, you
128       must  turn  on  the  domain_kernel_load_modules  boolean.  Disabled  by
129       default.
130
131       setsebool -P domain_kernel_load_modules 1
132
133
134
135       If you want to allow all domains to execute in fips_mode, you must turn
136       on the fips_mode boolean. Enabled by default.
137
138       setsebool -P fips_mode 1
139
140
141
142       If you want to enable reading of urandom for all domains, you must turn
143       on the global_ssp boolean. Disabled by default.
144
145       setsebool -P global_ssp 1
146
147
148
149       If  you  want  to allow confined applications to run with kerberos, you
150       must turn on the kerberos_enabled boolean. Enabled by default.
151
152       setsebool -P kerberos_enabled 1
153
154
155
156       If you want to allow system to run with  NIS,  you  must  turn  on  the
157       nis_enabled boolean. Disabled by default.
158
159       setsebool -P nis_enabled 1
160
161
162
163       If  you  want to allow confined applications to use nscd shared memory,
164       you must turn on the nscd_use_shm boolean. Disabled by default.
165
166       setsebool -P nscd_use_shm 1
167
168
169

MANAGED FILES

171       The SELinux process type pcp_pmproxy_t can manage  files  labeled  with
172       the  following  file types.  The paths listed are the default paths for
173       these file types.  Note the processes UID still need to have  DAC  per‐
174       missions.
175
176       cluster_conf_t
177
178            /etc/cluster(/.*)?
179
180       cluster_var_lib_t
181
182            /var/lib/pcsd(/.*)?
183            /var/lib/cluster(/.*)?
184            /var/lib/openais(/.*)?
185            /var/lib/pengine(/.*)?
186            /var/lib/corosync(/.*)?
187            /usr/lib/heartbeat(/.*)?
188            /var/lib/heartbeat(/.*)?
189            /var/lib/pacemaker(/.*)?
190
191       cluster_var_run_t
192
193            /var/run/crm(/.*)?
194            /var/run/cman_.*
195            /var/run/rsctmp(/.*)?
196            /var/run/aisexec.*
197            /var/run/heartbeat(/.*)?
198            /var/run/corosync-qnetd(/.*)?
199            /var/run/corosync-qdevice(/.*)?
200            /var/run/cpglockd.pid
201            /var/run/corosync.pid
202            /var/run/rgmanager.pid
203            /var/run/cluster/rgmanager.sk
204
205       pcp_log_t
206
207            /var/log/pcp(/.*)?
208
209       pcp_tmp_t
210
211
212       pcp_tmpfs_t
213
214
215       pcp_var_lib_t
216
217            /var/lib/pcp(/.*)?
218
219       pcp_var_run_t
220
221            /var/run/pcp(/.*)?
222            /var/run/pmcd.socket
223            /var/run/pmlogger.primary.socket
224
225       root_t
226
227            /sysroot/ostree/deploy/.*-atomic.*/deploy(/.*)?
228            /
229            /initrd
230
231

FILE CONTEXTS

233       SELinux requires files to have an extended attribute to define the file
234       type.
235
236       You can see the context of a file using the -Z option to ls
237
238       Policy governs the access  confined  processes  have  to  these  files.
239       SELinux  pcp_pmproxy  policy  is  very flexible allowing users to setup
240       their pcp_pmproxy processes in as secure a method as possible.
241
242       The following file types are defined for pcp_pmproxy:
243
244
245
246       pcp_pmproxy_exec_t
247
248       - Set files with the pcp_pmproxy_exec_t type, if you want to transition
249       an executable to the pcp_pmproxy_t domain.
250
251
252       Paths:
253            /usr/bin/pmproxy, /usr/libexec/pcp/bin/pmproxy
254
255
256       pcp_pmproxy_initrc_exec_t
257
258       -  Set  files  with  the pcp_pmproxy_initrc_exec_t type, if you want to
259       transition an executable to the pcp_pmproxy_initrc_t domain.
260
261
262
263       Note: File context can be temporarily modified with the chcon  command.
264       If  you want to permanently change the file context you need to use the
265       semanage fcontext command.  This will modify the SELinux labeling data‐
266       base.  You will need to use restorecon to apply the labels.
267
268

COMMANDS

270       semanage  fcontext  can also be used to manipulate default file context
271       mappings.
272
273       semanage permissive can also be used to manipulate  whether  or  not  a
274       process type is permissive.
275
276       semanage  module can also be used to enable/disable/install/remove pol‐
277       icy modules.
278
279       semanage boolean can also be used to manipulate the booleans
280
281
282       system-config-selinux is a GUI tool available to customize SELinux pol‐
283       icy settings.
284
285

AUTHOR

287       This manual page was auto-generated using sepolicy manpage .
288
289