1SNMP(3) User Contributed Perl Documentation SNMP(3)
2
6 SNMP - The Perl5 'SNMP' Extension Module for the Net-SNMP SNMP package.
7
9 use SNMP;
10 ...
11 $sess = new SNMP::Session(DestHost => localhost, Community => public);
12 $val = $sess->get('sysDescr.0');
13 ...
14 $vars = new SNMP::VarList([sysDescr,0], [sysContact,0], [sysLocation,0]);
15 @vals = $sess->get($vars);
16 ...
17 $vb = new SNMP::Varbind();
18 do {
19 $val = $sess->getnext($vb);
20 print "@{$vb}\n";
21 } until ($sess->{ErrorNum});
22 ...
23 $SNMP::save_descriptions = 1;
24 SNMP::initMib(); # assuming mib is not already loaded
25 print "$SNMP::MIB{sysDescr}{description}\n";
26
28 Note: The perl SNMP 5.0 module which comes with net-snmp 5.0 and higher
29 is different than previous versions in a number of ways. Most
30 importantly, it behaves like a proper net-snmp application and calls
31 init_snmp properly, which means it will read configuration files and
32 use those defaults where appropriate automatically parse MIB files,
33 etc. This will likely affect your perl applications if you have, for
34 instance, default values set up in your snmp.conf file (as the perl
35 module will now make use of those defaults). The documentation,
36 however, has sadly not been updated yet (aside from this note), nor is
37 the read_config default usage implementation fully complete.
38 The basic operations of the SNMP protocol are provided by this module
40 through an object oriented interface for modularity and ease of use.
41 The primary class is SNMP::Session which encapsulates the persistent
42 aspects of a connection between the management application and the
43 managed agent. Internally the class is implemented as a blessed hash
44 reference. This class supplies 'get', 'getnext', 'set', 'fget', and
45 'fgetnext' method calls. The methods take a variety of input argument
46 formats and support both synchronous and asynchronous operation through
47 a polymorphic API (i.e., method behaviour varies dependent on args
48 passed - see below).
49
51 $sess = new SNMP::Session(DestHost => 'host', ...)
52 The following arguments may be passed to new as a hash.
54 Basic Options
56 DestHost
57 Hostname or IP address of the SNMP agent you want to talk to.
58 Specified in Net-SNMP formatted agent addresses. These addresses
59 typically look like one of the following:
60 localhost
62 tcp:localhost
63 tls:localhost
64 tls:localhost:9876
65 udp6:[::1]:9876
66 unix:/some/path/to/file/socket
67 Defaults to 'localhost'.
69 Version
71 SNMP version to use.
72 The default is taken from library configuration - probably 3 [1, 2
74 (same as 2c), 2c, 3].
75 Timeout
77 The number of micro-seconds to wait before resending a request.
78 The default is '1000000'
80 Retries
82 The number of times to retry a request.
83 The default is '5'
85 RetryNoSuch
87 If enabled NOSUCH errors in 'get' pdus will be repaired, removing
88 the varbind in error, and resent - undef will be returned for all
89 NOSUCH varbinds, when set to '0' this feature is disabled and the
90 entire get request will fail on any NOSUCH error (applies to v1
91 only)
92 The default is '0'.
94 SNMPv3/TLS Options
96 OurIdentity
97 Our X.509 identity to use, which should either be a fingerprint or
98 the filename that holds the certificate.
99 TheirIdentity
101 The remote server's identity to connect to, specified as either a
102 fingerprint or a file name. Either this must be specified, or the
103 hostname below along with a trust anchor.
104 TheirHostname
106 The remote server's hostname that is expected. If their
107 certificate was signed by a CA then their hostname presented in the
108 certificate must match this value or the connection fails to be
109 established (to avoid man-in-the-middle attacks).
110 TrustCert
112 A trusted certificate to use as trust anchor (like a CA
113 certificate) for verifying a remote server's certificate. If a CA
114 certificate is used to validate a certificate then the
115 TheirHostname parameter must also be specified to ensure their
116 presented hostname in the certificate matches.
117 SNMPv3/USM Options
119 SecName
120 The SNMPv3 security name to use (most for SNMPv3 with USM).
121 The default is 'initial'.
123 SecLevel
125 The SNMPv3 security level to use [noAuthNoPriv, authNoPriv,
126 authPriv] (v3)
127 The default is 'noAuthNoPriv'.
129 SecEngineId
131 The SNMPv3 security engineID to use (if the snmpv3 security model
132 needs it; for example USM).
133 The default is <none>, security engineID and it will be probed if
135 not supplied (v3)
136 ContextEngineId
138 The SNMPv3 context engineID to use.
139 The default is the <none> and will be set either to the SecEngineId
141 value if set or discovered or will be discovered in other ways if
142 using TLS (RFC5343 based discovery).
143 Context
145 The SNMPv3 context name to use.
146 The default is '' (an empty string)
148 AuthProto
150 The SNMPv3/USM authentication protocol to use [MD5, SHA].
151 The default is 'MD5'.
153 AuthPass
155 The SNMPv3/USM authentication passphrase to use.
156 default <none>, authentication passphrase
158 PrivProto
160 The SNMPv3/USM privacy protocol to use [DES, AES].
161 The default is 'DES'.
163 PrivPass
165 The SNMPv3/USM privacy passphrase to use.
166 default <none>, privacy passphrase (v3)
168 AuthMasterKey
170 PrivMasterKey
171 AuthLocalizedKey
172 PrivLocalizedKey
173 Directly specified SNMPv3 USM user keys (used if you want to
174 specify the keys instead of deriving them from a password as
175 above).
176 SNMPv1 and SNMPv2c Options
178 Community
179 For SNMPv1 and SNMPv2c, the clear-text community name to use.
180 The default is 'public'.
182 Other Configuration Options
184 VarFormats
185 default 'undef', used by 'fget[next]', holds an hash reference of
186 output value formatters, (e.g., {<obj> => <sub-ref>, ... }, <obj>
187 must match the <obj> and format used in the get operation. A
188 special <obj>, '*', may be used to apply all <obj>s, the supplied
189 sub is called to translate the value to a new format. The sub is
190 called passing the Varbind as the arg
191 TypeFormats
193 default 'undef', used by 'fget[next]', holds an hash reference of
194 output value formatters, (e.g., {<type> => <sub-ref>, ... }, the
195 supplied sub is called to translate the value to a new format,
196 unless a VarFormat mathces first (e.g.,
197 $sess->{TypeFormats}{INTEGER} = \&mapEnum(); although this can be
198 done more efficiently by enabling $SNMP::use_enums or session
199 creation param 'UseEnums')
200 UseLongNames
202 defaults to the value of SNMP::use_long_names at time of session
203 creation. set to non-zero to have <tags> for 'getnext' methods
204 generated preferring longer Mib name convention (e.g.,
205 system.sysDescr vs just sysDescr)
206 UseSprintValue
208 defaults to the value of SNMP::use_sprint_value at time of session
209 creation. set to non-zero to have return values for 'get' and
210 'getnext' methods formatted with the libraries snprint_value
211 function. This will result in certain data types being returned in
212 non-canonical format Note: values returned with this option set may
213 not be appropriate for 'set' operations (see discussion of value
214 formats in <vars> description section)
215 UseEnums
217 defaults to the value of SNMP::use_enums at time of session
218 creation. set to non-zero to have integer return values converted
219 to enumeration identifiers if possible, these values will also be
220 acceptable when supplied to 'set' operations
221 UseNumeric
223 defaults to the value of SNMP::use_numeric at time of session
224 creation. set to non-zero to have <tags> for get methods returned
225 as numeric OID's rather than descriptions. UseLongNames will be
226 set so that the full OID is returned to the caller.
227 BestGuess
229 defaults to the value of SNMP::best_guess at time of session
230 creation. this setting controls how <tags> are parsed. setting to
231 0 causes a regular lookup. setting to 1 causes a regular
232 expression match (defined as -Ib in snmpcmd) and setting to 2
233 causes a random access lookup (defined as -IR in snmpcmd).
234 NonIncreasing
236 defaults to the value of SNMP::non_increasing at time of session
237 creation. this setting controls if a non-increasing OID during
238 bulkwalk will causes an error. setting to 0 causes the default
239 behaviour (which may, in very badly performing agents, result in a
240 never-ending loop). setting to 1 causes an error (OID not
241 increasing) when this error occur.
242 ErrorStr
244 read-only, holds the error message assoc. w/ last request
245 ErrorNum
247 read-only, holds the snmp_err or staus of last request
248 ErrorInd
250 read-only, holds the snmp_err_index when appropriate
251 Private variables:
253 DestAddr
255 internal field used to hold the translated DestHost field
256 SessPtr
258 internal field used to cache a created session structure
259 RemotePort
261 Obsolete. Please use the DestHost specifier to indicate the
262 hostname and port combination instead of this paramet.
263 SNMP::Session methods
265 $sess->update(<fields>)
266 Updates the SNMP::Session object with the values fields passed in
267 as a hash list (similar to new(<fields>)) (WARNING! not fully
268 implemented)
269 $sess->get(<vars> [,<callback>])
271 do SNMP GET, multiple <vars> formats accepted. for syncronous
272 operation <vars> will be updated with value(s) and type(s) and will
273 also return retrieved value(s). If <callback> supplied method will
274 operate asynchronously
275 $sess->fget(<vars> [,<callback>])
277 do SNMP GET like 'get' and format the values according the handlers
278 specified in $sess->{VarFormats} and $sess->{TypeFormats}
279 $sess->getnext(<vars> [,<callback>])
281 do SNMP GETNEXT, multiple <vars> formats accepted, returns
282 retrieved value(s), <vars> passed as arguments are updated to
283 indicate next lexicographical <obj>,<iid>,<val>, and <type>
284 Note: simple string <vars>,(e.g., 'sysDescr.0') form is not
286 updated. If <callback> supplied method will operate asynchronously
287 $sess->fgetnext(<vars> [,<callback>])
289 do SNMP GETNEXT like getnext and format the values according the
290 handlers specified in $sess->{VarFormats} and $sess->{TypeFormats}
291 $sess->set(<vars> [,<callback>])
293 do SNMP SET, multiple <vars> formats accepted. the value field in
294 all <vars> formats must be in a canonical format (i.e., well known
295 format) to ensure unambiguous translation to SNMP MIB data value
296 (see discussion of canonical value format <vars> description
297 section), returns snmp_errno. If <callback> supplied method will
298 operate asynchronously
299 $sess->getbulk(<non-repeaters>, <max-repeaters>, <vars>)
301 do an SNMP GETBULK, from the list of Varbinds, the single next
302 lexico instance is fetched for the first n Varbinds as defined by
303 <non-repeaters>. For remaining Varbinds, the m lexico instances are
304 retrieved each of the remaining Varbinds, where m is
305 <max-repeaters>.
306 $sess->bulkwalk(<non-repeaters>, <max-repeaters>, <vars> [,<callback>])
308 Do a "bulkwalk" of the list of Varbinds. This is done by sending a
309 GETBULK request (see getbulk() above) for the Varbinds. For each
310 requested variable, the response is examined to see if the next
311 lexico instance has left the requested sub-tree. Any further
312 instances returned for this variable are ignored, and the walk for
313 that sub-tree is considered complete.
314 If any sub-trees were not completed when the end of the responses
316 is reached, another request is composed, consisting of the
317 remaining variables. This process is repeated until all sub-trees
318 have been completed, or too many packets have been exchanged (to
319 avoid loops).
320 The bulkwalk() method returns an array containing an array of
322 Varbinds, one for each requested variable, in the order of the
323 variable requests. Upon error, bulkwalk() returns undef and sets
324 $sess->ErrorStr and $sess->ErrorNum. If a callback is supplied,
325 bulkwalk() returns the SNMP request id, and returns immediately.
326 The callback will be called with the supplied argument list and the
327 returned variables list.
328 Note: Because the client must "discover" that the tree is complete
330 by comparing the returned variables with those that were requested,
331 there is a potential "gotcha" when using the max-repeaters value.
332 Consider the following code to print a list of interfaces and byte
333 counts:
334 $numInts = $sess->get('ifNumber.0');
336 ($desc, $in, $out) = $sess->bulkwalk(0, $numInts,
337 [['ifDescr'], ['ifInOctets'], ['ifOutOctets']]);
338 for $i (0..($numInts - 1)) {
340 printf "Interface %4s: %s inOctets, %s outOctets\n",
341 $$desc[$i]->val, $$in[$i]->val, $$out[$i]->val;
342 }
343 This code will produce *two* requests to the agent -- the first to
345 get the interface values, and the second to discover that all the
346 information was in the first packet. To get around this, use
347 '$numInts + 1' for the max_repeaters value. This asks the agent to
348 include one additional (unrelated) variable that signals the end of
349 the sub-tree, allowing bulkwalk() to determine that the request is
350 complete.
351 $results = $sess->gettable(<TABLE OID>, <OPTIONS>)
353 This will retrieve an entire table of data and return a hash
354 reference to that data. The returned hash reference will have
355 indexes of the OID suffixes for the index data as the key. The
356 value for each entry will be another hash containing the data for a
357 given row. The keys to that hash will be the column names, and the
358 values will be the data.
359 Example:
361 #!/usr/bin/perl
363 use SNMP;
365 use Data::Dumper;
366 my $s = new SNMP::Session(DestHost => 'localhost');
368 print Dumper($s->gettable('ifTable'));
370 On my machine produces:
372 $VAR1 = {
374 '6' => {
375 'ifMtu' => '1500',
376 'ifPhysAddress' => 'PV',
377 # ...
378 'ifInUnknownProtos' => '0'
379 },
380 '4' => {
381 'ifMtu' => '1480',
382 'ifPhysAddress' => '',
383 # ...
384 'ifInUnknownProtos' => '0'
385 },
386 # ...
387 };
388 By default, it will try to do as optimized retrieval as possible.
390 It'll request multiple columns at once, and use GETBULK if
391 possible. A few options may be specified by passing in an OPTIONS
392 hash containing various parameters:
393 noindexes => 1
395 Instructs the code not to parse the indexes and place the
396 results in the second hash. If you don't need the index data,
397 this will be faster.
398 columns => [ colname1, ... ]
400 This specifies which columns to collect. By default, it will
401 try to collect all the columns defined in the MIB table.
402 repeat => COUNT
404 Specifies a GETBULK repeat COUNT. IE, it will request this
405 many varbinds back per column when using the GETBULK operation.
406 Shortening this will mean smaller packets which may help going
407 through some systems. By default, this value is calculated and
408 attempts to guess at what will fit all the results into 1000
409 bytes. This calculation is fairly safe, hopefully, but you can
410 either raise or lower the number using this option if desired.
411 In lossy networks, you want to make sure that the packets don't
412 get fragmented and lowering this value is one way to help that.
413 nogetbulk => 1
415 Force the use of GETNEXT rather than GETBULK. (always true for
416 SNMPv1, as it doesn't have GETBULK anyway). Some agents are
417 great implementers of GETBULK and this allows you to force the
418 use of GETNEXT operations instead.
419 callback => \&subroutine
421 callback => [\&subroutine, optarg1, optarg2, ...]
422 If a callback is specified, gettable will return quickly
423 without returning results. When the results are finally
424 retrieved the callback subroutine will be called (see the other
425 sections defining callback behaviour and how to make use of
426 SNMP::MainLoop which is required for this to work). An
427 additional argument of the normal hash result will be added to
428 the callback subroutine arguments.
429 Note 1: internally, the gettable function uses it's own
431 callbacks which are passed to getnext/getbulk as appropriate.
432 Note 2: callback support is only available in the SNMP module
434 version 5.04 and above. To test for this in code intending to
435 support both versions prior to 5.04 and 5.04 and up, the
436 following should work:
437 if ($response = $sess->gettable('ifTable', callback => \&my_sub)) {
439 # got a response, gettable doesn't support callback
440 my_sub($response);
441 $no_mainloop = 1;
442 }
443 Deciding on whether to use SNMP::MainLoop is left as an
445 exercise to the reader since it depends on whether your code
446 uses other callbacks as well.
447
449 $sess = new SNMP::Session(DestHost => 'host', ...)
450 supports all applicable fields from SNMP::Session (see above)
452 SNMP::TrapSession methods
454 $sess->trap(enterprise, agent, generic, specific, uptime, <vars>)
455 $sess->trap(enterprise=>'.1.3.6.1.4.1.2021', # or 'ucdavis' [default]
456 agent => '127.0.0.1', # or 'localhost',[dflt 1st intf on host]
457 generic => specific, # can be omitted if 'specific' supplied
458 specific => 5, # can be omitted if 'generic' supplied
459 uptime => 1234, # dflt to localhost uptime (0 on win32)
460 [[ifIndex, 1, 1],[sysLocation, 0, "here"]]); # optional vars
461 # always last
462 trap(oid, uptime, <vars>) - v2 format
464 $sess->trap(oid => 'snmpRisingAlarm',
465 uptime => 1234,
466 [[ifIndex, 1, 1],[sysLocation, 0, "here"]]); # optional vars
467 # always last
468
470 <vars> may be one of the following forms:
471 SNMP::VarList
473 represents an array of MIB objects to get or set, implemented as a
474 blessed reference to an array of SNMP::Varbinds, (e.g.,
475 [<varbind1>, <varbind2>, ...])
476 SNMP::Varbind
478 represents a single MIB object to get or set, implemented as a
479 blessed reference to a 4 element array; [<obj>, <iid>, <val>,
480 <type>].
481 <obj>
483 one of the following forms:
484 1) leaf identifier (e.g., 'sysDescr') assumed to be unique for
486 practical purposes
487 2) fully qualified identifier (e.g.,
489 '.iso.org.dod.internet.mgmt.mib-2.system.sysDescr')
490 3) fully qualified, dotted-decimal, numeric OID (e.g.,
492 '.1.3.6.1.2.1.1.1')
493 <iid>
495 the dotted-decimal, instance identifier. for scalar MIB objects
496 use '0'
497 <val>
499 the SNMP data value retrieved from or being set to the agents
500 MIB. for (f)get(next) operations <val> may have a variety of
501 formats as determined by session and package settings. However
502 for set operations the <val> format must be canonical to ensure
503 unambiguous translation. The canonical forms are as follows:
504 OBJECTID
506 dotted-decimal (e.g., .1.3.6.1.2.1.1.1)
507 OCTETSTR
509 perl scalar containing octets
510 INTEGER
512 decimal signed integer (or enum)
513 NETADDR
515 dotted-decimal
516 IPADDR
518 dotted-decimal
519 COUNTER
521 decimal unsigned integer
522 COUNTER64
524 decimal unsigned integer
525 GAUGE
527 decimal unsigned integer
528 UINTEGER
530 decimal unsigned integer
531 TICKS
533 decimal unsigned integer
534 OPAQUE
536 perl scalar containing octets
537 NULL
539 perl scalar containing nothing
540 <type>
542 SNMP data type (see list above), this field is populated by
543 'get' and 'getnext' operations. In some cases the programmer
544 needs to populate this field when passing to a 'set' operation.
545 this field need not be supplied when the attribute indicated by
546 <tag> is already described by loaded Mib modules. for 'set's,
547 if a numeric OID is used and the object is not currently in the
548 loaded Mib, the <type> field must be supplied
549 simple string
551 light weight form of <var> used to 'set' or 'get' a single
552 attribute without constructing an SNMP::Varbind. stored in a perl
553 scalar, has the form '<tag>.<iid>', (e.g., 'sysDescr.0'). for 'set'
554 operations the value is passed as a second arg. Note: This argument
555 form is not updated in get[next] operations as are the other forms.
556
558 <callback> may be one of the following forms:
559 without arguments
561 \&subname
562 sub { ... }
563 or with arguments
564 [ \&subname, $arg1, ... ]
565 [ sub { ... }, $arg1, ... ]
566 [ "method", $obj, $arg1, ... ]
567 callback will be called when response is received or timeout occurs.
569 the last argument passed to callback will be a SNMP::VarList reference.
570 In case of timeout the last argument will be undef.
571 &SNMP::MainLoop([<timeout>, [<callback>]])
573 to be used with async SNMP::Session calls. MainLoop must be called
574 after initial async calls so return packets from the agent will be
575 processed. If no args supplied this function enters an infinite
576 loop so program must be exited in a callback or externally
577 interrupted. If <timeout(sic)
578 &SNMP::finish()
580 This function, when called from an SNMP::MainLoop() callback
581 function, will cause the current SNMP::MainLoop() to return after
582 the callback is completed. finish() can be used to terminate an
583 otherwise-infinite MainLoop. A new MainLoop() instance can then be
584 started to handle further requests.
585
587 $SNMP::VERSION
588 the current version specifier (e.g., 3.1.0)
589 $SNMP::auto_init_mib
591 default '1', set to 0 to disable automatic reading of the MIB upon
592 session creation. set to non-zero to call initMib at session
593 creation which will result in MIB loading according to Net-SNMP
594 env. variables (see man mib_api)
595 $SNMP::verbose
597 default '0', controls warning/info output of SNMP module, 0 => no
598 output, 1 => enables warning/info output from SNMP module itself
599 (is also controlled by SNMP::debugging - see below)
600 $SNMP::use_long_names
602 default '0', set to non-zero to enable the use of longer Mib
603 identifiers. see translateObj. will also influence the formatting
604 of <tag> in varbinds returned from 'getnext' operations. Can be set
605 on a per session basis (UseLongNames)
606 $SNMP::use_sprint_value
608 default '0', set to non-zero to enable formatting of response
609 values using the snmp libraries snprint_value function. can also be
610 set on a per session basis (see UseSprintValue) Note: returned
611 values may not be suitable for 'set' operations
612 $SNMP::use_enums
614 default '0',set non-zero to return values as enums and allow sets
615 using enums where appropriate. integer data will still be accepted
616 for set operations. can also be set on a per session basis (see
617 UseEnums)
618 $SNMP::use_numeric
620 default to '0',set to non-zero to have <tags> for 'get' methods
621 returned as numeric OID's rather than descriptions. UseLongNames
622 will be set so that the entire OID will be returned. Set on a per-
623 session basis (see UseNumeric).
624 $SNMP::best_guess
626 default '0'. This setting controls how <tags> are parsed. Setting
627 to 0 causes a regular lookup. Setting to 1 causes a regular
628 expression match (defined as -Ib in snmpcmd) and setting to 2
629 causes a random access lookup (defined as -IR in snmpcmd). Can
630 also be set on a per session basis (see BestGuess)
631 $SNMP::save_descriptions
633 default '0',set non-zero to have mib parser save attribute
634 descriptions. must be set prior to mib initialization
635 $SNMP::debugging
637 default '0', controls debugging output level within SNMP module and
638 libsnmp
639 1. enables 'SNMP::verbose' (see above)
641 2. level 1 plus snmp_set_do_debugging(1)
643 3. level 2 plus snmp_set_dump_packet(1)
645 $SNMP::dump_packet
647 default '0', set [non-]zero to independently set
648 snmp_set_dump_packet()
649 SNMP::register_debug_tokens()
651 Allows to register one or more debug tokens, just like the -D
652 option of snmpd. Each debug token enables a group of debug
653 statements. An example:
654 SNMP::register_debug_tokens("tdomain,netsnmp_unix");
655
657 a tied hash to access parsed MIB information. After the MIB has been
658 loaded this hash allows access to to the parsed in MIB meta-data(the
659 structure of the MIB (i.e., schema)). The hash returns blessed
660 references to SNMP::MIB::NODE objects which represent a single MIB
661 attribute. The nodes can be fetched with multiple 'key' formats - the
662 leaf name (e.g.,sysDescr) or fully/partially qualified name (e.g.,
663 system.sysDescr) or fully qualified numeric OID. The returned node
664 object supports the following fields:
665 objectID
667 dotted decimal fully qualified OID
668 label
670 leaf textual identifier (e.g., 'sysDescr')
671 subID
673 leaf numeric OID component of objectID (e.g., '1')
674 moduleID
676 textual identifier for module (e.g., 'RFC1213-MIB')
677 parent
679 parent node
680 children
682 array reference of children nodes
683 nextNode
685 next lexico node (BUG!does not return in lexico order)
686 type
688 returns application type (see getType for values)
689 access
691 returns ACCESS (ReadOnly, ReadWrite, WriteOnly, NoAccess, Notify,
692 Create)
693 status
695 returns STATUS (Mandatory, Optional, Obsolete, Deprecated)
696 syntax
698 returns 'textualConvention' if defined else 'type'
699 textualConvention
701 returns TEXTUAL-CONVENTION
702 TCDescription
704 returns the TEXTUAL-CONVENTION's DESCRIPTION field.
705 units
707 returns UNITS
708 hint
710 returns HINT
711 enums
713 returns hash ref {tag => num, ...}
714 ranges
716 returns array ref of hash ref [{low => num, high => num}, ...]
717 description
719 returns DESCRIPTION ($SNMP::save_descriptions must be set prior to
720 MIB initialization/parsing)
721 reference
723 returns the REFERENCE clause
724 indexes
726 returns the objects in the INDEX clause
727 implied
729 returns true if the last object in the INDEX is IMPLIED
730
732 &SNMP::setMib(<file>)
733 allows dynamic parsing of the mib and explicit specification of mib
734 file independent of environment variables. called with no args acts
735 like initMib, loading MIBs indicated by environment variables (see
736 Net-SNMP mib_api docs). passing non-zero second arg forces previous
737 mib to be freed and replaced (Note: second arg not working since
738 freeing previous Mib is more involved than before).
739 &SNMP::initMib()
741 calls library init_mib function if Mib not already loaded - does
742 nothing if Mib already loaded. will parse directories and load
743 modules according to environment variables described in Net-SNMP
744 documentations. (see man mib_api, MIBDIRS, MIBS, MIBFILE(S), etc.)
745 &SNMP::addMibDirs(<dir>,...)
747 calls library add_mibdir for each directory supplied. will cause
748 directory(s) to be added to internal list and made available for
749 searching in subsequent loadModules calls
750 &SNMP::addMibFiles(<file>,...)
752 calls library read_mib function. The file(s) supplied will be read
753 and all Mib module definitions contained therein will be added to
754 internal mib tree structure
755 &SNMP::loadModules(<mod>,...)
757 calls library read_module function. The module(s) supplied will be
758 searched for in the current mibdirs and and added to internal mib
759 tree structure. Passing special <mod>, 'ALL', will cause all known
760 modules to be loaded.
761 &SNMP::unloadModules(<mod>,...)
763 *Not Implemented*
764 &SNMP::translateObj(<var>[,arg,[arg]])
766 will convert a text obj tag to an OID and vice-versa. Any iid
767 suffix is retained numerically. Default behaviour when converting
768 a numeric OID to text form is to return leaf identifier only
769 (e.g.,'sysDescr') but when $SNMP::use_long_names is non-zero or a
770 non-zero second arg is supplied it will return a longer textual
771 identifier. An optional third argument of non-zero will cause the
772 module name to be prepended to the text name (e.g.
773 'SNMPv2-MIB::sysDescr'). When converting a text obj, the
774 $SNMP::best_guess option is used. If no Mib is loaded when called
775 and $SNMP::auto_init_mib is enabled then the Mib will be loaded.
776 Will return 'undef' upon failure.
777 &SNMP::getType(<var>)
779 return SNMP data type for given textual identifier OBJECTID,
780 OCTETSTR, INTEGER, NETADDR, IPADDR, COUNTER GAUGE, TIMETICKS,
781 OPAQUE, or undef
782 &SNMP::mapEnum(<var>)
784 converts integer value to enumertion tag defined in Mib or converts
785 tag to integer depending on input. the function will return the
786 corresponding integer value *or* tag for a given MIB attribute and
787 value. The function will sense which direction to perform the
788 conversion. Various arg formats are supported
789 $val = SNMP::mapEnum($varbind);
791 where $varbind is SNMP::Varbind or equiv. note: $varbind will
792 be updated
793 $val = SNMP::mapEnum('ipForwarding', 'forwarding');
795 $val = SNMP::mapEnum('ipForwarding', 1);
796
798 Note: utility functions do not support async operation yet.
799 &snmp_get()
801 takes args of SNMP::Session::new followed by those of
802 SNMP::Session::get
803 &snmp_getnext()
805 takes args of SNMP::Session::new followed by those of
806 SNMP::Session::getnext
807 &snmp_set()
809 takes args of SNMP::Session::new followed by those of
810 SNMP::Session::set
811 &snmp_trap()
813 takes args of SNMP::TrapSession::new followed by those of
814 SNMP::TrapSession::trap
815
817 If problems occur there are number areas to look at to narrow down the
818 possibilities.
819 The first step should be to test the Net-SNMP installation
821 independently from the Perl5 SNMP interface.
822 Try running the apps from the Net-SNMP distribution.
824 Make sure your agent (snmpd) is running and properly configured with
826 read-write access for the community you are using.
827 Ensure that your MIBs are installed and enviroment variables are set
829 appropriately (see man mib_api)
830 Be sure to remove old net-snmp installations and ensure headers and
832 libraries from old CMU installations are not being used by mistake.
833 If the problem occurs during compilation/linking check that the snmp
835 library being linked is actually the Net-SNMP library (there have been
836 name conflicts with existing snmp libs).
837 Also check that the header files are correct and up to date.
839 Sometimes compiling the Net-SNMP library with
841 'position-independent-code' enabled is required (HPUX specifically).
842 If you cannot resolve the problem you can post to
844 comp.lang.perl.modules or
845 net-snmp-users@net-snmp-users@lists.sourceforge.net
846 please give sufficient information to analyze the problem (OS type,
848 versions for OS/Perl/Net-SNMP/compiler, complete error output, etc.)
849
851 Many thanks to all those who supplied patches, suggestions and
852 feedback.
853 Joe Marzot (the original author)
855 Wes Hardaker and the net-snmp-coders
856 Dave Perkins
857 Marcel Wiget
858 David Blackburn
859 John Stofell
860 Gary Hayward
861 Claire Harrison
862 Achim Bohnet
863 Doug Kingston
864 Jacques Vidrine
865 Carl Jacobsen
866 Wayne Marquette
867 Scott Schumate
868 Michael Slifcak
869 Srivathsan Srinivasagopalan
870 Bill Fenner
871 Jef Peeraer
872 Daniel Hagerty
873 Karl "Rat" Schilke and Electric Lightwave, Inc.
874 Perl5 Porters
875 Alex Burger
876 Apologies to any/all who's patch/feature/request was not mentioned or
878 included - most likely it was lost when paying work intruded on my fun.
879 Please try again if you do not see a desired feature. This may actually
880 turn out to be a decent package with such excellent help and the fact
881 that I have more time to work on it than in the past.
882
884 bugs, comments, questions to net-snmp-users@lists.sourceforge.net
885
887 Copyright (c) 1995-2000 G. S. Marzot. All rights reserved.
888 This program is free software; you can redistribute it and/or
889 modify it under the same terms as Perl itself.
890 Copyright (c) 2001-2002 Networks Associates Technology, Inc. All
892 Rights Reserved. This program is free software; you can
893 redistribute it and/or modify it under the same terms as Perl
894 itself.
895perl v5.26.3 2018-07-16 SNMP(3)