1HCIATTACH(1)              Linux System Administration             HCIATTACH(1)
2
3
4

NAME

6       hciattach - attach serial devices via UART HCI to BlueZ stack
7

SYNOPSIS

9       hciattach  [-b] [-n] [-p] [-t timeout] [-s speed] [-l] [-r] tty type|id
10       speed flow bdaddr
11

DESCRIPTION

13       Hciattach is used to attach a serial UART to the Bluetooth stack as HCI
14       transport interface.
15

OPTIONS

17       -b     Send break.
18
19       -n     Don't detach from controlling terminal.
20
21       -p     Print the PID when detaching.
22
23       -t timeout
24              Specify an initialization timeout.  (Default is 5 seconds.)
25
26       -s speed
27              Specify an initial speed instead of the hardware default.
28
29       -l     List all available configurations.
30
31       -r     Set the HCI device into raw mode (the kernel and bluetoothd will
32              ignore it).
33
34       tty    This specifies the serial device to attach. A leading  /dev  can
35              be omitted. Examples: /dev/ttyS1 ttyS2
36
37       type|id
38              The  type  or id of the Bluetooth device that is to be attached,
39              i.e. vendor or other device specific identifier. Currently  sup‐
40              ported types are
41
42              type   description
43
44              any    Unspecified   HCI_UART   interface,  no  vendor  specific
45                     options
46
47              ericsson
48                     Ericsson based modules
49
50              digi   Digianswer based cards
51
52              xircom Xircom PCMCIA cards: Credit Card Adapter  and  Real  Port
53                     Adapter
54
55              csr    CSR  Casira  serial  adapter  or BrainBoxes serial dongle
56                     (BL642)
57
58              bboxes BrainBoxes PCMCIA card (BL620)
59
60              swave  Silicon Wave kits
61
62              bcsp   Serial adapters using CSR chips with BCSP serial protocol
63
64              ath3k  Atheros AR300x based serial Bluetooth device
65
66              intel  Intel Bluetooth device
67
68       Supported IDs are (manufacturer id, product id)
69
70              0x0105, 0x080a
71                     Xircom PCMCIA cards: Credit Card Adapter  and  Real  Port
72                     Adapter
73
74              0x0160, 0x0002
75                     BrainBoxes PCMCIA card (BL620)
76
77
78       speed  The speed specifies the UART speed to use. Baudrates higher than
79              115.200bps require vendor specific initializations that are  not
80              implemented  for  all types of devices. In general the following
81              speeds are supported:
82
83              9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600
84
85              Supported vendor devices are automatically initialised to  their
86              respective best settings.
87
88       flow   If  the  keyword  flow  is  appended to the list of options then
89              hardware flow control is forced on the serial link ( CRTSCTS  ).
90              All  above  mentioned  device types have flow set by default. To
91              force no flow control use noflow instead.
92
93       sleep  Enables hardware specific power management feature. If sleep  is
94              appended to the list of options then this feature is enabled. To
95              disable this feature use nosleep instead.  All  above  mentioned
96              device types have nosleep set by default.
97
98              Note:  This option will only be valid for hardware which support
99              hardware specific power management enable option from host.
100
101       bdaddr The bdaddr specifies the Bluetooth Address to use.  Some devices
102              (like  the STLC2500) do not store the Bluetooth address in hard‐
103              ware memory.  Instead it must be uploaded during the initializa‐
104              tion  process.   If this argument is specified, then the address
105              will be used to initialize the  device.   Otherwise,  a  default
106              address will be used.
107
108

AUTHORS

110       Written by Maxim Krasnyansky <maxk@qualcomm.com>
111
112       Manual page by Nils Faerber <nils@kernelconcepts.de>
113
114
115
116BlueZ                             Jan 22 2002                     HCIATTACH(1)