1OPEN_BY_HANDLE_AT(2) Linux Programmer's Manual OPEN_BY_HANDLE_AT(2)
2
6 name_to_handle_at, open_by_handle_at - obtain handle for a pathname and
7 open file via a handle
8
10 #define _GNU_SOURCE /* See feature_test_macros(7) */
11 #include <sys/types.h>
12 #include <sys/stat.h>
13 #include <fcntl.h>
14 int name_to_handle_at(int dirfd, const char *pathname,
16 struct file_handle *handle,
17 int *mount_id, int flags);
18 int open_by_handle_at(int mount_fd, struct file_handle *handle,
20 int flags);
21
23 The name_to_handle_at() and open_by_handle_at() system calls split the
24 functionality of openat(2) into two parts: name_to_handle_at() returns
25 an opaque handle that corresponds to a specified file; open_by_han‐
26 dle_at() opens the file corresponding to a handle returned by a previ‐
27 ous call to name_to_handle_at() and returns an open file descriptor.
28 name_to_handle_at()
30 The name_to_handle_at() system call returns a file handle and a mount
31 ID corresponding to the file specified by the dirfd and pathname argu‐
32 ments. The file handle is returned via the argument handle, which is a
33 pointer to a structure of the following form:
34 struct file_handle {
36 unsigned int handle_bytes; /* Size of f_handle [in, out] */
37 int handle_type; /* Handle type [out] */
38 unsigned char f_handle[0]; /* File identifier (sized by
39 caller) [out] */
40 };
41 It is the caller's responsibility to allocate the structure with a size
43 large enough to hold the handle returned in f_handle. Before the call,
44 the handle_bytes field should be initialized to contain the allocated
45 size for f_handle. (The constant MAX_HANDLE_SZ, defined in <fcntl.h>,
46 specifies the maximum expected size for a file handle. It is not a
47 guaranteed upper limit as future filesystems may require more space.)
48 Upon successful return, the handle_bytes field is updated to contain
49 the number of bytes actually written to f_handle.
50 The caller can discover the required size for the file_handle structure
52 by making a call in which handle->handle_bytes is zero; in this case,
53 the call fails with the error EOVERFLOW and handle->handle_bytes is set
54 to indicate the required size; the caller can then use this information
55 to allocate a structure of the correct size (see EXAMPLE below). Some
56 care is needed here as EOVERFLOW can also indicate that no file handle
57 is available for this particular name in a filesystem which does nor‐
58 mally support file-handle lookup. This case can be detected when the
59 EOVERFLOW error is returned without handle_bytes being increased.
60 Other than the use of the handle_bytes field, the caller should treat
62 the file_handle structure as an opaque data type: the handle_type and
63 f_handle fields are needed only by a subsequent call to open_by_han‐
64 dle_at().
65 The flags argument is a bit mask constructed by ORing together zero or
67 more of AT_EMPTY_PATH and AT_SYMLINK_FOLLOW, described below.
68 Together, the pathname and dirfd arguments identify the file for which
70 a handle is to be obtained. There are four distinct cases:
71 * If pathname is a nonempty string containing an absolute pathname,
73 then a handle is returned for the file referred to by that pathname.
74 In this case, dirfd is ignored.
75 * If pathname is a nonempty string containing a relative pathname and
77 dirfd has the special value AT_FDCWD, then pathname is interpreted
78 relative to the current working directory of the caller, and a han‐
79 dle is returned for the file to which it refers.
80 * If pathname is a nonempty string containing a relative pathname and
82 dirfd is a file descriptor referring to a directory, then pathname
83 is interpreted relative to the directory referred to by dirfd, and a
84 handle is returned for the file to which it refers. (See openat(2)
85 for an explanation of why "directory file descriptors" are useful.)
86 * If pathname is an empty string and flags specifies the value
88 AT_EMPTY_PATH, then dirfd can be an open file descriptor referring
89 to any type of file, or AT_FDCWD, meaning the current working direc‐
90 tory, and a handle is returned for the file to which it refers.
91 The mount_id argument returns an identifier for the filesystem mount
93 that corresponds to pathname. This corresponds to the first field in
94 one of the records in /proc/self/mountinfo. Opening the pathname in
95 the fifth field of that record yields a file descriptor for the mount
96 point; that file descriptor can be used in a subsequent call to
97 open_by_handle_at(). mount_id is returned both for a successful call
98 and for a call that results in the error EOVERFLOW.
99 By default, name_to_handle_at() does not dereference pathname if it is
101 a symbolic link, and thus returns a handle for the link itself. If
102 AT_SYMLINK_FOLLOW is specified in flags, pathname is dereferenced if it
103 is a symbolic link (so that the call returns a handle for the file
104 referred to by the link).
105 name_to_handle_at() does not trigger a mount when the final component
107 of the path is an automount point. When a filesystem supports both
108 file handles and automount points, a name_to_handle_at() call on an
109 automount point will return with error EOVERFLOW without having
110 increased handle_bytes. This can happen since Linux 4.13 with NFS when
111 accessing a directory which is on a separate filesystem on the server.
112 In this case, the automount can be triggered by adding a "/" to the end
113 of the path.
114 open_by_handle_at()
116 The open_by_handle_at() system call opens the file referred to by han‐
117 dle, a file handle returned by a previous call to name_to_handle_at().
118 The mount_fd argument is a file descriptor for any object (file, direc‐
120 tory, etc.) in the mounted filesystem with respect to which handle
121 should be interpreted. The special value AT_FDCWD can be specified,
122 meaning the current working directory of the caller.
123 The flags argument is as for open(2). If handle refers to a symbolic
125 link, the caller must specify the O_PATH flag, and the symbolic link is
126 not dereferenced; the O_NOFOLLOW flag, if specified, is ignored.
127 The caller must have the CAP_DAC_READ_SEARCH capability to invoke
129 open_by_handle_at().
130
132 On success, name_to_handle_at() returns 0, and open_by_handle_at()
133 returns a nonnegative file descriptor.
134 In the event of an error, both system calls return -1 and set errno to
136 indicate the cause of the error.
137
139 name_to_handle_at() and open_by_handle_at() can fail for the same
140 errors as openat(2). In addition, they can fail with the errors noted
141 below.
142 name_to_handle_at() can fail with the following errors:
144 EFAULT pathname, mount_id, or handle points outside your accessible
146 address space.
147 EINVAL flags includes an invalid bit value.
149 EINVAL handle->handle_bytes is greater than MAX_HANDLE_SZ.
151 ENOENT pathname is an empty string, but AT_EMPTY_PATH was not specified
153 in flags.
154 ENOTDIR
156 The file descriptor supplied in dirfd does not refer to a direc‐
157 tory, and it is not the case that both flags includes
158 AT_EMPTY_PATH and pathname is an empty string.
159 EOPNOTSUPP
161 The filesystem does not support decoding of a pathname to a file
162 handle.
163 EOVERFLOW
165 The handle->handle_bytes value passed into the call was too
166 small. When this error occurs, handle->handle_bytes is updated
167 to indicate the required size for the handle.
168 open_by_handle_at() can fail with the following errors:
170 EBADF mount_fd is not an open file descriptor.
172 EFAULT handle points outside your accessible address space.
174 EINVAL handle->handle_bytes is greater than MAX_HANDLE_SZ or is equal
176 to zero.
177 ELOOP handle refers to a symbolic link, but O_PATH was not specified
179 in flags.
180 EPERM The caller does not have the CAP_DAC_READ_SEARCH capability.
182 ESTALE The specified handle is not valid. This error will occur if,
184 for example, the file has been deleted.
185
187 These system calls first appeared in Linux 2.6.39. Library support is
188 provided in glibc since version 2.14.
189
191 These system calls are nonstandard Linux extensions.
192 FreeBSD has a broadly similar pair of system calls in the form of
194 getfh() and openfh().
195
197 A file handle can be generated in one process using name_to_handle_at()
198 and later used in a different process that calls open_by_handle_at().
199 Some filesystem don't support the translation of pathnames to file han‐
201 dles, for example, /proc, /sys, and various network filesystems.
202 A file handle may become invalid ("stale") if a file is deleted, or for
204 other filesystem-specific reasons. Invalid handles are notified by an
205 ESTALE error from open_by_handle_at().
206 These system calls are designed for use by user-space file servers.
208 For example, a user-space NFS server might generate a file handle and
209 pass it to an NFS client. Later, when the client wants to open the
210 file, it could pass the handle back to the server. This sort of func‐
211 tionality allows a user-space file server to operate in a stateless
212 fashion with respect to the files it serves.
213 If pathname refers to a symbolic link and flags does not specify
215 AT_SYMLINK_FOLLOW, then name_to_handle_at() returns a handle for the
216 link (rather than the file to which it refers). The process receiving
217 the handle can later perform operations on the symbolic link by con‐
218 verting the handle to a file descriptor using open_by_handle_at() with
219 the O_PATH flag, and then passing the file descriptor as the dirfd
220 argument in system calls such as readlinkat(2) and fchownat(2).
221 Obtaining a persistent filesystem ID
223 The mount IDs in /proc/self/mountinfo can be reused as filesystems are
224 unmounted and mounted. Therefore, the mount ID returned by
225 name_to_handle_at() (in *mount_id) should not be treated as a persis‐
226 tent identifier for the corresponding mounted filesystem. However, an
227 application can use the information in the mountinfo record that corre‐
228 sponds to the mount ID to derive a persistent identifier.
229 For example, one can use the device name in the fifth field of the
231 mountinfo record to search for the corresponding device UUID via the
232 symbolic links in /dev/disks/by-uuid. (A more comfortable way of
233 obtaining the UUID is to use the libblkid(3) library.) That process
234 can then be reversed, using the UUID to look up the device name, and
235 then obtaining the corresponding mount point, in order to produce the
236 mount_fd argument used by open_by_handle_at().
237
239 The two programs below demonstrate the use of name_to_handle_at() and
240 open_by_handle_at(). The first program (t_name_to_handle_at.c) uses
241 name_to_handle_at() to obtain the file handle and mount ID for the file
242 specified in its command-line argument; the handle and mount ID are
243 written to standard output.
244 The second program (t_open_by_handle_at.c) reads a mount ID and file
246 handle from standard input. The program then employs open_by_han‐
247 dle_at() to open the file using that handle. If an optional command-
248 line argument is supplied, then the mount_fd argument for open_by_han‐
249 dle_at() is obtained by opening the directory named in that argument.
250 Otherwise, mount_fd is obtained by scanning /proc/self/mountinfo to
251 find a record whose mount ID matches the mount ID read from standard
252 input, and the mount directory specified in that record is opened.
253 (These programs do not deal with the fact that mount IDs are not per‐
254 sistent.)
255 The following shell session demonstrates the use of these two programs:
257 $ echo 'Can you please think about it?' > cecilia.txt
259 $ ./t_name_to_handle_at cecilia.txt > fh
260 $ ./t_open_by_handle_at < fh
261 open_by_handle_at: Operation not permitted
262 $ sudo ./t_open_by_handle_at < fh # Need CAP_SYS_ADMIN
263 Read 31 bytes
264 $ rm cecilia.txt
265 Now we delete and (quickly) re-create the file so that it has the same
267 content and (by chance) the same inode. Nevertheless, open_by_han‐
268 dle_at() recognizes that the original file referred to by the file han‐
269 dle no longer exists.
270 $ stat --printf="%i\n" cecilia.txt # Display inode number
272 4072121
273 $ rm cecilia.txt
274 $ echo 'Can you please think about it?' > cecilia.txt
275 $ stat --printf="%i\n" cecilia.txt # Check inode number
276 4072121
277 $ sudo ./t_open_by_handle_at < fh
278 open_by_handle_at: Stale NFS file handle
279 Program source: t_name_to_handle_at.c
281 #define _GNU_SOURCE
283 #include <sys/types.h>
284 #include <sys/stat.h>
285 #include <fcntl.h>
286 #include <stdio.h>
287 #include <stdlib.h>
288 #include <unistd.h>
289 #include <errno.h>
290 #include <string.h>
291 #define errExit(msg) do { perror(msg); exit(EXIT_FAILURE); \
293 } while (0)
294 int
296 main(int argc, char *argv[])
297 {
298 struct file_handle *fhp;
299 int mount_id, fhsize, flags, dirfd, j;
300 char *pathname;
301 if (argc != 2) {
303 fprintf(stderr, "Usage: %s pathname\n", argv[0]);
304 exit(EXIT_FAILURE);
305 }
306 pathname = argv[1];
308 /* Allocate file_handle structure */
310 fhsize = sizeof(*fhp);
312 fhp = malloc(fhsize);
313 if (fhp == NULL)
314 errExit("malloc");
315 /* Make an initial call to name_to_handle_at() to discover
317 the size required for file handle */
318 dirfd = AT_FDCWD; /* For name_to_handle_at() calls */
320 flags = 0; /* For name_to_handle_at() calls */
321 fhp->handle_bytes = 0;
322 if (name_to_handle_at(dirfd, pathname, fhp,
323 &mount_id, flags) != -1 || errno != EOVERFLOW) {
324 fprintf(stderr, "Unexpected result from name_to_handle_at()\n");
325 exit(EXIT_FAILURE);
326 }
327 /* Reallocate file_handle structure with correct size */
329 fhsize = sizeof(struct file_handle) + fhp->handle_bytes;
331 fhp = realloc(fhp, fhsize); /* Copies fhp->handle_bytes */
332 if (fhp == NULL)
333 errExit("realloc");
334 /* Get file handle from pathname supplied on command line */
336 if (name_to_handle_at(dirfd, pathname, fhp, &mount_id, flags) == -1)
338 errExit("name_to_handle_at");
339 /* Write mount ID, file handle size, and file handle to stdout,
341 for later reuse by t_open_by_handle_at.c */
342 printf("%d\n", mount_id);
344 printf("%d %d ", fhp->handle_bytes, fhp->handle_type);
345 for (j = 0; j < fhp->handle_bytes; j++)
346 printf(" %02x", fhp->f_handle[j]);
347 printf("\n");
348 exit(EXIT_SUCCESS);
350 }
351 Program source: t_open_by_handle_at.c
353 #define _GNU_SOURCE
355 #include <sys/types.h>
356 #include <sys/stat.h>
357 #include <fcntl.h>
358 #include <limits.h>
359 #include <stdio.h>
360 #include <stdlib.h>
361 #include <unistd.h>
362 #include <string.h>
363 #define errExit(msg) do { perror(msg); exit(EXIT_FAILURE); \
365 } while (0)
366 /* Scan /proc/self/mountinfo to find the line whose mount ID matches
368 'mount_id'. (An easier way to do this is to install and use the
369 'libmount' library provided by the 'util-linux' project.)
370 Open the corresponding mount path and return the resulting file
371 descriptor. */
372 static int
374 open_mount_path_by_id(int mount_id)
375 {
376 char *linep;
377 size_t lsize;
378 char mount_path[PATH_MAX];
379 int mi_mount_id, found;
380 ssize_t nread;
381 FILE *fp;
382 fp = fopen("/proc/self/mountinfo", "r");
384 if (fp == NULL)
385 errExit("fopen");
386 found = 0;
388 linep = NULL;
389 while (!found) {
390 nread = getline(&linep, &lsize, fp);
391 if (nread == -1)
392 break;
393 nread = sscanf(linep, "%d %*d %*s %*s %s",
395 &mi_mount_id, mount_path);
396 if (nread != 2) {
397 fprintf(stderr, "Bad sscanf()\n");
398 exit(EXIT_FAILURE);
399 }
400 if (mi_mount_id == mount_id)
402 found = 1;
403 }
404 free(linep);
405 fclose(fp);
407 if (!found) {
409 fprintf(stderr, "Could not find mount point\n");
410 exit(EXIT_FAILURE);
411 }
412 return open(mount_path, O_RDONLY);
414 }
415 int
417 main(int argc, char *argv[])
418 {
419 struct file_handle *fhp;
420 int mount_id, fd, mount_fd, handle_bytes, j;
421 ssize_t nread;
422 char buf[1000];
423 #define LINE_SIZE 100
424 char line1[LINE_SIZE], line2[LINE_SIZE];
425 char *nextp;
426 if ((argc > 1 && strcmp(argv[1], "--help") == 0) || argc > 2) {
428 fprintf(stderr, "Usage: %s [mount-path]\n", argv[0]);
429 exit(EXIT_FAILURE);
430 }
431 /* Standard input contains mount ID and file handle information:
433 Line 1: <mount_id>
435 Line 2: <handle_bytes> <handle_type> <bytes of handle in hex>
436 */
437 if ((fgets(line1, sizeof(line1), stdin) == NULL) ||
439 (fgets(line2, sizeof(line2), stdin) == NULL)) {
440 fprintf(stderr, "Missing mount_id / file handle\n");
441 exit(EXIT_FAILURE);
442 }
443 mount_id = atoi(line1);
445 handle_bytes = strtoul(line2, &nextp, 0);
447 /* Given handle_bytes, we can now allocate file_handle structure */
449 fhp = malloc(sizeof(struct file_handle) + handle_bytes);
451 if (fhp == NULL)
452 errExit("malloc");
453 fhp->handle_bytes = handle_bytes;
455 fhp->handle_type = strtoul(nextp, &nextp, 0);
457 for (j = 0; j < fhp->handle_bytes; j++)
459 fhp->f_handle[j] = strtoul(nextp, &nextp, 16);
460 /* Obtain file descriptor for mount point, either by opening
462 the pathname specified on the command line, or by scanning
463 /proc/self/mounts to find a mount that matches the 'mount_id'
464 that we received from stdin. */
465 if (argc > 1)
467 mount_fd = open(argv[1], O_RDONLY);
468 else
469 mount_fd = open_mount_path_by_id(mount_id);
470 if (mount_fd == -1)
472 errExit("opening mount fd");
473 /* Open file using handle and mount point */
475 fd = open_by_handle_at(mount_fd, fhp, O_RDONLY);
477 if (fd == -1)
478 errExit("open_by_handle_at");
479 /* Try reading a few bytes from the file */
481 nread = read(fd, buf, sizeof(buf));
483 if (nread == -1)
484 errExit("read");
485 printf("Read %zd bytes\n", nread);
487 exit(EXIT_SUCCESS);
489 }
490
492 open(2), libblkid(3), blkid(8), findfs(8), mount(8)
493 The libblkid and libmount documentation in the latest util-linux
495 release at ⟨https://www.kernel.org/pub/linux/utils/util-linux/⟩
496
498 This page is part of release 4.15 of the Linux man-pages project. A
499 description of the project, information about reporting bugs, and the
500 latest version of this page, can be found at
501 https://www.kernel.org/doc/man-pages/.
502Linux 2017-09-15 OPEN_BY_HANDLE_AT(2)