1TERMIOS(3) Linux Programmer's Manual TERMIOS(3)
2
6 termios, tcgetattr, tcsetattr, tcsendbreak, tcdrain, tcflush, tcflow,
7 cfmakeraw, cfgetospeed, cfgetispeed, cfsetispeed, cfsetospeed, cfset‐
8 speed - get and set terminal attributes, line control, get and set baud
9 rate
10
12 #include <termios.h>
13 #include <unistd.h>
14 int tcgetattr(int fd, struct termios *termios_p);
16 int tcsetattr(int fd, int optional_actions,
18 const struct termios *termios_p);
19 int tcsendbreak(int fd, int duration);
21 int tcdrain(int fd);
23 int tcflush(int fd, int queue_selector);
25 int tcflow(int fd, int action);
27 void cfmakeraw(struct termios *termios_p);
29 speed_t cfgetispeed(const struct termios *termios_p);
31 speed_t cfgetospeed(const struct termios *termios_p);
33 int cfsetispeed(struct termios *termios_p, speed_t speed);
35 int cfsetospeed(struct termios *termios_p, speed_t speed);
37 int cfsetspeed(struct termios *termios_p, speed_t speed);
39 Feature Test Macro Requirements for glibc (see feature_test_macros(7)):
41 cfsetspeed(), cfmakeraw():
43 Since glibc 2.19:
44 _DEFAULT_SOURCE
45 Glibc 2.19 and earlier:
46 _BSD_SOURCE
47
49 The termios functions describe a general terminal interface that is
50 provided to control asynchronous communications ports.
51 The termios structure
53 Many of the functions described here have a termios_p argument that is
54 a pointer to a termios structure. This structure contains at least the
55 following members:
56 tcflag_t c_iflag; /* input modes */
58 tcflag_t c_oflag; /* output modes */
59 tcflag_t c_cflag; /* control modes */
60 tcflag_t c_lflag; /* local modes */
61 cc_t c_cc[NCCS]; /* special characters */
62 The values that may be assigned to these fields are described below.
64 In the case of the first four bit-mask fields, the definitions of some
65 of the associated flags that may be set are exposed only if a specific
66 feature test macro (see feature_test_macros(7)) is defined, as noted in
67 brackets ("[]").
68 In the descriptions below, "not in POSIX" means that the value is not
70 specified in POSIX.1-2001, and "XSI" means that the value is specified
71 in POSIX.1-2001 as part of the XSI extension.
72 c_iflag flag constants:
74 IGNBRK Ignore BREAK condition on input.
76 BRKINT If IGNBRK is set, a BREAK is ignored. If it is not set but
78 BRKINT is set, then a BREAK causes the input and output queues
79 to be flushed, and if the terminal is the controlling terminal
80 of a foreground process group, it will cause a SIGINT to be sent
81 to this foreground process group. When neither IGNBRK nor
82 BRKINT are set, a BREAK reads as a null byte ('\0'), except when
83 PARMRK is set, in which case it reads as the sequence \377 \0
84 \0.
85 IGNPAR Ignore framing errors and parity errors.
87 PARMRK If this bit is set, input bytes with parity or framing errors
89 are marked when passed to the program. This bit is meaningful
90 only when INPCK is set and IGNPAR is not set. The way erroneous
91 bytes are marked is with two preceding bytes, \377 and \0.
92 Thus, the program actually reads three bytes for one erroneous
93 byte received from the terminal. If a valid byte has the value
94 \377, and ISTRIP (see below) is not set, the program might con‐
95 fuse it with the prefix that marks a parity error. Therefore, a
96 valid byte \377 is passed to the program as two bytes, \377
97 \377, in this case.
98 If neither IGNPAR nor PARMRK is set, read a character with a
100 parity error or framing error as \0.
101 INPCK Enable input parity checking.
103 ISTRIP Strip off eighth bit.
105 INLCR Translate NL to CR on input.
107 IGNCR Ignore carriage return on input.
109 ICRNL Translate carriage return to newline on input (unless IGNCR is
111 set).
112 IUCLC (not in POSIX) Map uppercase characters to lowercase on input.
114 IXON Enable XON/XOFF flow control on output.
116 IXANY (XSI) Typing any character will restart stopped output. (The
118 default is to allow just the START character to restart output.)
119 IXOFF Enable XON/XOFF flow control on input.
121 IMAXBEL
123 (not in POSIX) Ring bell when input queue is full. Linux does
124 not implement this bit, and acts as if it is always set.
125 IUTF8 (since Linux 2.6.4)
127 (not in POSIX) Input is UTF8; this allows character-erase to be
128 correctly performed in cooked mode.
129 c_oflag flag constants:
131 OPOST Enable implementation-defined output processing.
133 OLCUC (not in POSIX) Map lowercase characters to uppercase on output.
135 ONLCR (XSI) Map NL to CR-NL on output.
137 OCRNL Map CR to NL on output.
139 ONOCR Don't output CR at column 0.
141 ONLRET Don't output CR.
143 OFILL Send fill characters for a delay, rather than using a timed
145 delay.
146 OFDEL Fill character is ASCII DEL (0177). If unset, fill character is
148 ASCII NUL ('\0'). (Not implemented on Linux.)
149 NLDLY Newline delay mask. Values are NL0 and NL1. [requires
151 _BSD_SOURCE or _SVID_SOURCE or _XOPEN_SOURCE]
152 CRDLY Carriage return delay mask. Values are CR0, CR1, CR2, or CR3.
154 [requires _BSD_SOURCE or _SVID_SOURCE or _XOPEN_SOURCE]
155 TABDLY Horizontal tab delay mask. Values are TAB0, TAB1, TAB2, TAB3
157 (or XTABS). A value of TAB3, that is, XTABS, expands tabs to
158 spaces (with tab stops every eight columns). [requires
159 _BSD_SOURCE or _SVID_SOURCE or _XOPEN_SOURCE]
160 BSDLY Backspace delay mask. Values are BS0 or BS1. (Has never been
162 implemented.) [requires _BSD_SOURCE or _SVID_SOURCE or
163 _XOPEN_SOURCE]
164 VTDLY Vertical tab delay mask. Values are VT0 or VT1.
166 FFDLY Form feed delay mask. Values are FF0 or FF1. [requires
168 _BSD_SOURCE or _SVID_SOURCE or _XOPEN_SOURCE]
169 c_cflag flag constants:
171 CBAUD (not in POSIX) Baud speed mask (4+1 bits). [requires
173 _BSD_SOURCE or _SVID_SOURCE]
174 CBAUDEX
176 (not in POSIX) Extra baud speed mask (1 bit), included in CBAUD.
177 [requires _BSD_SOURCE or _SVID_SOURCE]
178 (POSIX says that the baud speed is stored in the termios struc‐
180 ture without specifying where precisely, and provides
181 cfgetispeed() and cfsetispeed() for getting at it. Some systems
182 use bits selected by CBAUD in c_cflag, other systems use sepa‐
183 rate fields, for example, sg_ispeed and sg_ospeed.)
184 CSIZE Character size mask. Values are CS5, CS6, CS7, or CS8.
186 CSTOPB Set two stop bits, rather than one.
188 CREAD Enable receiver.
190 PARENB Enable parity generation on output and parity checking for
192 input.
193 PARODD If set, then parity for input and output is odd; otherwise even
195 parity is used.
196 HUPCL Lower modem control lines after last process closes the device
198 (hang up).
199 CLOCAL Ignore modem control lines.
201 LOBLK (not in POSIX) Block output from a noncurrent shell layer. For
203 use by shl (shell layers). (Not implemented on Linux.)
204 CIBAUD (not in POSIX) Mask for input speeds. The values for the CIBAUD
206 bits are the same as the values for the CBAUD bits, shifted left
207 IBSHIFT bits. [requires _BSD_SOURCE or _SVID_SOURCE] (Not
208 implemented on Linux.)
209 CMSPAR (not in POSIX) Use "stick" (mark/space) parity (supported on
211 certain serial devices): if PARODD is set, the parity bit is
212 always 1; if PARODD is not set, then the parity bit is always 0.
213 [requires _BSD_SOURCE or _SVID_SOURCE]
214 CRTSCTS
216 (not in POSIX) Enable RTS/CTS (hardware) flow control.
217 [requires _BSD_SOURCE or _SVID_SOURCE]
218 c_lflag flag constants:
220 ISIG When any of the characters INTR, QUIT, SUSP, or DSUSP are
222 received, generate the corresponding signal.
223 ICANON Enable canonical mode (described below).
225 XCASE (not in POSIX; not supported under Linux) If ICANON is also set,
227 terminal is uppercase only. Input is converted to lowercase,
228 except for characters preceded by \. On output, uppercase char‐
229 acters are preceded by \ and lowercase characters are converted
230 to uppercase. [requires _BSD_SOURCE or _SVID_SOURCE or
231 _XOPEN_SOURCE]
232 ECHO Echo input characters.
234 ECHOE If ICANON is also set, the ERASE character erases the preceding
236 input character, and WERASE erases the preceding word.
237 ECHOK If ICANON is also set, the KILL character erases the current
239 line.
240 ECHONL If ICANON is also set, echo the NL character even if ECHO is not
242 set.
243 ECHOCTL
245 (not in POSIX) If ECHO is also set, terminal special characters
246 other than TAB, NL, START, and STOP are echoed as ^X, where X is
247 the character with ASCII code 0x40 greater than the special
248 character. For example, character 0x08 (BS) is echoed as ^H.
249 [requires _BSD_SOURCE or _SVID_SOURCE]
250 ECHOPRT
252 (not in POSIX) If ICANON and ECHO are also set, characters are
253 printed as they are being erased. [requires _BSD_SOURCE or
254 _SVID_SOURCE]
255 ECHOKE (not in POSIX) If ICANON is also set, KILL is echoed by erasing
257 each character on the line, as specified by ECHOE and ECHOPRT.
258 [requires _BSD_SOURCE or _SVID_SOURCE]
259 DEFECHO
261 (not in POSIX) Echo only when a process is reading. (Not imple‐
262 mented on Linux.)
263 FLUSHO (not in POSIX; not supported under Linux) Output is being
265 flushed. This flag is toggled by typing the DISCARD character.
266 [requires _BSD_SOURCE or _SVID_SOURCE]
267 NOFLSH Disable flushing the input and output queues when generating
269 signals for the INT, QUIT, and SUSP characters.
270 TOSTOP Send the SIGTTOU signal to the process group of a background
272 process which tries to write to its controlling terminal.
273 PENDIN (not in POSIX; not supported under Linux) All characters in the
275 input queue are reprinted when the next character is read.
276 (bash(1) handles typeahead this way.) [requires _BSD_SOURCE or
277 _SVID_SOURCE]
278 IEXTEN Enable implementation-defined input processing. This flag, as
280 well as ICANON must be enabled for the special characters EOL2,
281 LNEXT, REPRINT, WERASE to be interpreted, and for the IUCLC flag
282 to be effective.
283 The c_cc array defines the terminal special characters. The symbolic
285 indices (initial values) and meaning are:
286 VDISCARD
288 (not in POSIX; not supported under Linux; 017, SI, Ctrl-O) Tog‐
289 gle: start/stop discarding pending output. Recognized when IEX‐
290 TEN is set, and then not passed as input.
291 VDSUSP (not in POSIX; not supported under Linux; 031, EM, Ctrl-Y)
293 Delayed suspend character (DSUSP): send SIGTSTP signal when the
294 character is read by the user program. Recognized when IEXTEN
295 and ISIG are set, and the system supports job control, and then
296 not passed as input.
297 VEOF (004, EOT, Ctrl-D) End-of-file character (EOF). More precisely:
299 this character causes the pending tty buffer to be sent to the
300 waiting user program without waiting for end-of-line. If it is
301 the first character of the line, the read(2) in the user program
302 returns 0, which signifies end-of-file. Recognized when ICANON
303 is set, and then not passed as input.
304 VEOL (0, NUL) Additional end-of-line character (EOL). Recognized
306 when ICANON is set.
307 VEOL2 (not in POSIX; 0, NUL) Yet another end-of-line character (EOL2).
309 Recognized when ICANON is set.
310 VERASE (0177, DEL, rubout, or 010, BS, Ctrl-H, or also #) Erase charac‐
312 ter (ERASE). This erases the previous not-yet-erased character,
313 but does not erase past EOF or beginning-of-line. Recognized
314 when ICANON is set, and then not passed as input.
315 VINTR (003, ETX, Ctrl-C, or also 0177, DEL, rubout) Interrupt charac‐
317 ter (INTR). Send a SIGINT signal. Recognized when ISIG is set,
318 and then not passed as input.
319 VKILL (025, NAK, Ctrl-U, or Ctrl-X, or also @) Kill character (KILL).
321 This erases the input since the last EOF or beginning-of-line.
322 Recognized when ICANON is set, and then not passed as input.
323 VLNEXT (not in POSIX; 026, SYN, Ctrl-V) Literal next (LNEXT). Quotes
325 the next input character, depriving it of a possible special
326 meaning. Recognized when IEXTEN is set, and then not passed as
327 input.
328 VMIN Minimum number of characters for noncanonical read (MIN).
330 VQUIT (034, FS, Ctrl-\) Quit character (QUIT). Send SIGQUIT signal.
332 Recognized when ISIG is set, and then not passed as input.
333 VREPRINT
335 (not in POSIX; 022, DC2, Ctrl-R) Reprint unread characters (RE‐
336 PRINT). Recognized when ICANON and IEXTEN are set, and then not
337 passed as input.
338 VSTART (021, DC1, Ctrl-Q) Start character (START). Restarts output
340 stopped by the Stop character. Recognized when IXON is set, and
341 then not passed as input.
342 VSTATUS
344 (not in POSIX; not supported under Linux; status request: 024,
345 DC4, Ctrl-T). Status character (STATUS). Display status infor‐
346 mation at terminal, including state of foreground process and
347 amount of CPU time it has consumed. Also sends a SIGINFO signal
348 (not supported on Linux) to the foreground process group.
349 VSTOP (023, DC3, Ctrl-S) Stop character (STOP). Stop output until
351 Start character typed. Recognized when IXON is set, and then
352 not passed as input.
353 VSUSP (032, SUB, Ctrl-Z) Suspend character (SUSP). Send SIGTSTP sig‐
355 nal. Recognized when ISIG is set, and then not passed as input.
356 VSWTCH (not in POSIX; not supported under Linux; 0, NUL) Switch charac‐
358 ter (SWTCH). Used in System V to switch shells in shell layers,
359 a predecessor to shell job control.
360 VTIME Timeout in deciseconds for noncanonical read (TIME).
362 VWERASE
364 (not in POSIX; 027, ETB, Ctrl-W) Word erase (WERASE). Recog‐
365 nized when ICANON and IEXTEN are set, and then not passed as
366 input.
367 An individual terminal special character can be disabled by setting the
369 value of the corresponding c_cc element to _POSIX_VDISABLE.
370 The above symbolic subscript values are all different, except that
372 VTIME, VMIN may have the same value as VEOL, VEOF, respectively. In
373 noncanonical mode the special character meaning is replaced by the
374 timeout meaning. For an explanation of VMIN and VTIME, see the
375 description of noncanonical mode below.
376 Retrieving and changing terminal settings
378 tcgetattr() gets the parameters associated with the object referred by
379 fd and stores them in the termios structure referenced by termios_p.
380 This function may be invoked from a background process; however, the
381 terminal attributes may be subsequently changed by a foreground
382 process.
383 tcsetattr() sets the parameters associated with the terminal (unless
385 support is required from the underlying hardware that is not available)
386 from the termios structure referred to by termios_p. optional_actions
387 specifies when the changes take effect:
388 TCSANOW
390 the change occurs immediately.
391 TCSADRAIN
393 the change occurs after all output written to fd has been trans‐
394 mitted. This option should be used when changing parameters
395 that affect output.
396 TCSAFLUSH
398 the change occurs after all output written to the object
399 referred by fd has been transmitted, and all input that has been
400 received but not read will be discarded before the change is
401 made.
402 Canonical and noncanonical mode
404 The setting of the ICANON canon flag in c_lflag determines whether the
405 terminal is operating in canonical mode (ICANON set) or noncanonical
406 mode (ICANON unset). By default, ICANON is set.
407 In canonical mode:
409 * Input is made available line by line. An input line is available
411 when one of the line delimiters is typed (NL, EOL, EOL2; or EOF at
412 the start of line). Except in the case of EOF, the line delimiter is
413 included in the buffer returned by read(2).
414 * Line editing is enabled (ERASE, KILL; and if the IEXTEN flag is set:
416 WERASE, REPRINT, LNEXT). A read(2) returns at most one line of
417 input; if the read(2) requested fewer bytes than are available in the
418 current line of input, then only as many bytes as requested are read,
419 and the remaining characters will be available for a future read(2).
420 * The maximum line length is 4096 chars (including the terminating new‐
422 line character); lines longer than 4096 chars are truncated. After
423 4095 characters, input processing (e.g., ISIG and ECHO* processing)
424 continues, but any input data after 4095 characters up to (but not
425 including) any terminating newline is discarded. This ensures that
426 the terminal can always receive more input until at least one line
427 can be read.
428 In noncanonical mode input is available immediately (without the user
430 having to type a line-delimiter character), no input processing is per‐
431 formed, and line editing is disabled. The read buffer will only accept
432 4095 chars; this provides the necessary space for a newline char if the
433 input mode is switched to canonical. The settings of MIN (c_cc[VMIN])
434 and TIME (c_cc[VTIME]) determine the circumstances in which a read(2)
435 completes; there are four distinct cases:
436 MIN == 0, TIME == 0 (polling read)
438 If data is available, read(2) returns immediately, with the
439 lesser of the number of bytes available, or the number of bytes
440 requested. If no data is available, read(2) returns 0.
441 MIN > 0, TIME == 0 (blocking read)
443 read(2) blocks until MIN bytes are available, and returns up to
444 the number of bytes requested.
445 MIN == 0, TIME > 0 (read with timeout)
447 TIME specifies the limit for a timer in tenths of a second. The
448 timer is started when read(2) is called. read(2) returns either
449 when at least one byte of data is available, or when the timer
450 expires. If the timer expires without any input becoming avail‐
451 able, read(2) returns 0. If data is already available at the
452 time of the call to read(2), the call behaves as though the data
453 was received immediately after the call.
454 MIN > 0, TIME > 0 (read with interbyte timeout)
456 TIME specifies the limit for a timer in tenths of a second.
457 Once an initial byte of input becomes available, the timer is
458 restarted after each further byte is received. read(2) returns
459 when any of the following conditions is met:
460 * MIN bytes have been received.
462 * The interbyte timer expires.
464 * The number of bytes requested by read(2) has been received.
466 (POSIX does not specify this termination condition, and on
467 some other implementations read(2) does not return in this
468 case.)
469 Because the timer is started only after the initial byte becomes
471 available, at least one byte will be read. If data is already
472 available at the time of the call to read(2), the call behaves
473 as though the data was received immediately after the call.
474 POSIX does not specify whether the setting of the O_NONBLOCK file sta‐
476 tus flag takes precedence over the MIN and TIME settings. If O_NON‐
477 BLOCK is set, a read(2) in noncanonical mode may return immediately,
478 regardless of the setting of MIN or TIME. Furthermore, if no data is
479 available, POSIX permits a read(2) in noncanonical mode to return
480 either 0, or -1 with errno set to EAGAIN.
481 Raw mode
483 cfmakeraw() sets the terminal to something like the "raw" mode of the
484 old Version 7 terminal driver: input is available character by charac‐
485 ter, echoing is disabled, and all special processing of terminal input
486 and output characters is disabled. The terminal attributes are set as
487 follows:
488 termios_p->c_iflag &= ~(IGNBRK | BRKINT | PARMRK | ISTRIP
490 | INLCR | IGNCR | ICRNL | IXON);
491 termios_p->c_oflag &= ~OPOST;
492 termios_p->c_lflag &= ~(ECHO | ECHONL | ICANON | ISIG | IEXTEN);
493 termios_p->c_cflag &= ~(CSIZE | PARENB);
494 termios_p->c_cflag |= CS8;
495 Line control
497 tcsendbreak() transmits a continuous stream of zero-valued bits for a
498 specific duration, if the terminal is using asynchronous serial data
499 transmission. If duration is zero, it transmits zero-valued bits for
500 at least 0.25 seconds, and not more that 0.5 seconds. If duration is
501 not zero, it sends zero-valued bits for some implementation-defined
502 length of time.
503 If the terminal is not using asynchronous serial data transmission,
505 tcsendbreak() returns without taking any action.
506 tcdrain() waits until all output written to the object referred to by
508 fd has been transmitted.
509 tcflush() discards data written to the object referred to by fd but not
511 transmitted, or data received but not read, depending on the value of
512 queue_selector:
513 TCIFLUSH
515 flushes data received but not read.
516 TCOFLUSH
518 flushes data written but not transmitted.
519 TCIOFLUSH
521 flushes both data received but not read, and data written but
522 not transmitted.
523 tcflow() suspends transmission or reception of data on the object
525 referred to by fd, depending on the value of action:
526 TCOOFF suspends output.
528 TCOON restarts suspended output.
530 TCIOFF transmits a STOP character, which stops the terminal device from
532 transmitting data to the system.
533 TCION transmits a START character, which starts the terminal device
535 transmitting data to the system.
536 The default on open of a terminal file is that neither its input nor
538 its output is suspended.
539 Line speed
541 The baud rate functions are provided for getting and setting the values
542 of the input and output baud rates in the termios structure. The new
543 values do not take effect until tcsetattr() is successfully called.
544 Setting the speed to B0 instructs the modem to "hang up". The actual
546 bit rate corresponding to B38400 may be altered with setserial(8).
547 The input and output baud rates are stored in the termios structure.
549 cfgetospeed() returns the output baud rate stored in the termios struc‐
551 ture pointed to by termios_p.
552 cfsetospeed() sets the output baud rate stored in the termios structure
554 pointed to by termios_p to speed, which must be one of these constants:
555 B0
557 B50
558 B75
559 B110
560 B134
561 B150
562 B200
563 B300
564 B600
565 B1200
566 B1800
567 B2400
568 B4800
569 B9600
570 B19200
571 B38400
572 B57600
573 B115200
574 B230400
575 The zero baud rate, B0, is used to terminate the connection. If B0 is
577 specified, the modem control lines shall no longer be asserted. Nor‐
578 mally, this will disconnect the line. CBAUDEX is a mask for the speeds
579 beyond those defined in POSIX.1 (57600 and above). Thus, B57600 &
580 CBAUDEX is nonzero.
581 cfgetispeed() returns the input baud rate stored in the termios struc‐
583 ture.
584 cfsetispeed() sets the input baud rate stored in the termios structure
586 to speed, which must be specified as one of the Bnnn constants listed
587 above for cfsetospeed(). If the input baud rate is set to zero, the
588 input baud rate will be equal to the output baud rate.
589 cfsetspeed() is a 4.4BSD extension. It takes the same arguments as
591 cfsetispeed(), and sets both input and output speed.
592
594 cfgetispeed() returns the input baud rate stored in the termios struc‐
595 ture.
596 cfgetospeed() returns the output baud rate stored in the termios struc‐
598 ture.
599 All other functions return:
601 0 on success.
603 -1 on failure and set errno to indicate the error.
605 Note that tcsetattr() returns success if any of the requested changes
607 could be successfully carried out. Therefore, when making multiple
608 changes it may be necessary to follow this call with a further call to
609 tcgetattr() to check that all changes have been performed successfully.
610
612 For an explanation of the terms used in this section, see
613 attributes(7).
614 ┌─────────────────────────────────────┬───────────────┬─────────┐
616 │Interface │ Attribute │ Value │
617 ├─────────────────────────────────────┼───────────────┼─────────┤
618 │tcgetattr(), tcsetattr(), tcdrain(), │ Thread safety │ MT-Safe │
619 │tcflush(), tcflow(), tcsendbreak(), │ │ │
620 │cfmakeraw(), cfgetispeed(), │ │ │
621 │cfgetospeed(), cfsetispeed(), │ │ │
622 │cfsetospeed(), cfsetspeed() │ │ │
623 └─────────────────────────────────────┴───────────────┴─────────┘
625 tcgetattr(), tcsetattr(), tcsendbreak(), tcdrain(), tcflush(),
626 tcflow(), cfgetispeed(), cfgetospeed(), cfsetispeed(), and cfse‐
627 tospeed() are specified in POSIX.1-2001.
628 cfmakeraw() and cfsetspeed() are nonstandard, but available on the BS‐
630 Ds.
631
633 UNIX V7 and several later systems have a list of baud rates where after
634 the fourteen values B0, ..., B9600 one finds the two constants EXTA,
635 EXTB ("External A" and "External B"). Many systems extend the list
636 with much higher baud rates.
637 The effect of a nonzero duration with tcsendbreak() varies. SunOS
639 specifies a break of duration * N seconds, where N is at least 0.25,
640 and not more than 0.5. Linux, AIX, DU, Tru64 send a break of duration
641 milliseconds. FreeBSD and NetBSD and HP-UX and MacOS ignore the value
642 of duration. Under Solaris and UnixWare, tcsendbreak() with nonzero
643 duration behaves like tcdrain().
644
646 reset(1), setterm(1), stty(1), tput(1), tset(1), tty(1), ioctl_con‐
647 sole(2), ioctl_tty(2), setserial(8)
648
650 This page is part of release 4.15 of the Linux man-pages project. A
651 description of the project, information about reporting bugs, and the
652 latest version of this page, can be found at
653 https://www.kernel.org/doc/man-pages/.
654Linux 2017-09-15 TERMIOS(3)