1eXosip2_install(3) libeXosip2 eXosip2_install(3)
2
6 eXosip2_install - INSTALL
7 Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software
9 Foundation, Inc.
10 This file is free documentation; the Free Software Foundation gives
12 unlimited permission to copy, distribute and modify it.
13 Basic Installation
15 ==================
16 These are generic installation instructions.
18 The `configure' shell script attempts to guess correct values for
20 various system-dependent variables used during compilation. It uses
21 those values to create a `Makefile' in each directory of the package.
22 It may also create one or more `.h' files containing system-dependent
23 definitions. Finally, it creates a shell script `config.status' that
24 you can run in the future to recreate the current configuration, and a
25 file `config.log' containing compiler output (useful mainly for
26 debugging `configure').
27 It can also use an optional file (typically called `config.cache'
29 and enabled with `--cache-file=config.cache' or simply `-C') that saves
30 the results of its tests to speed up reconfiguring. (Caching is
31 disabled by default to prevent problems with accidental use of stale
32 cache files.)
33 If you need to do unusual things to compile the package, please try
35 to figure out how `configure' could check whether to do them, and mail
36 diffs or instructions to the address given in the `README' so they can
37 be considered for the next release. If you are using the cache, and at
38 some point `config.cache' contains results you don't want to keep, you
39 may remove or edit it.
40 The file `configure.ac' (or `configure.in') is used to create
42 `configure' by a program called `autoconf'. You only need
43 `configure.ac' if you want to change it or regenerate `configure' using
44 a newer version of `autoconf'.
45 The simplest way to compile this package is:
47 1. `cd' to the directory containing the package's source code and type
49 `./configure' to configure the package for your system. If you're
50 using `csh' on an old version of System V, you might need to type
51 `sh ./configure' instead to prevent `csh' from trying to execute
52 `configure' itself.
53 Running `configure' takes awhile. While running, it prints some
55 messages telling which features it is checking for.
56 2. Type `make' to compile the package.
58 3. Optionally, type `make check' to run any self-tests that come with
60 the package.
61 4. Type `make install' to install the programs and any data files and
63 documentation.
64 5. You can remove the program binaries and object files from the
66 source code directory by typing `make clean'. To also remove the
67 files that `configure' created (so you can compile the package for
68 a different kind of computer), type `make distclean'. There is
69 also a `make maintainer-clean' target, but that is intended mainly
70 for the package's developers. If you use it, you may have to get
71 all sorts of other programs in order to regenerate files that came
72 with the distribution.
73 Compilers and Options
75 =====================
76 Some systems require unusual options for compilation or linking that
78 the `configure' script does not know about. Run `./configure --help'
79 for details on some of the pertinent environment variables.
80 You can give `configure' initial values for configuration parameters
82 by setting variables in the command line or in the environment. Here
83 is an example:
84 ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
86 *Note Defining Variables::, for more details.
88 Compiling For Multiple Architectures
90 ====================================
91 You can compile the package for more than one kind of computer at the
93 same time, by placing the object files for each architecture in their
94 own directory. To do this, you must use a version of `make' that
95 supports the `VPATH' variable, such as GNU `make'. `cd' to the
96 directory where you want the object files and executables to go and run
97 the `configure' script. `configure' automatically checks for the
98 source code in the directory that `configure' is in and in `..'.
99 If you have to use a `make' that does not support the `VPATH'
101 variable, you have to compile the package for one architecture at a
102 time in the source code directory. After you have installed the
103 package for one architecture, use `make distclean' before reconfiguring
104 for another architecture.
105 Installation Names
107 ==================
108 By default, `make install' will install the package's files in
110 `/usr/local/bin', `/usr/local/man', etc. You can specify an
111 installation prefix other than `/usr/local' by giving `configure' the
112 option `--prefix=PATH'.
113 You can specify separate installation prefixes for
115 architecture-specific files and architecture-independent files. If you
116 give `configure' the option `--exec-prefix=PATH', the package will use
117 PATH as the prefix for installing programs and libraries.
118 Documentation and other data files will still use the regular prefix.
119 In addition, if you use an unusual directory layout you can give
121 options like `--bindir=PATH' to specify different values for particular
122 kinds of files. Run `configure --help' for a list of the directories
123 you can set and what kinds of files go in them.
124 If the package supports it, you can cause programs to be installed
126 with an extra prefix or suffix on their names by giving `configure' the
127 option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
128 Optional Features
130 =================
131 Some packages pay attention to `--enable-FEATURE' options to
133 `configure', where FEATURE indicates an optional part of the package.
134 They may also pay attention to `--with-PACKAGE' options, where PACKAGE
135 is something like `gnu-as' or `x' (for the X Window System). The
136 `README' should mention any `--enable-' and `--with-' options that the
137 package recognizes.
138 For packages that use the X Window System, `configure' can usually
140 find the X include and library files automatically, but if it doesn't,
141 you can use the `configure' options `--x-includes=DIR' and
142 `--x-libraries=DIR' to specify their locations.
143 Specifying the System Type
145 ==========================
146 There may be some features `configure' cannot figure out
148 automatically, but needs to determine by the type of machine the package
149 will run on. Usually, assuming the package is built to be run on the
150 _same_ architectures, `configure' can figure that out, but if it prints
151 a message saying it cannot guess the machine type, give it the
152 `--build=TYPE' option. TYPE can either be a short name for the system
153 type, such as `sun4', or a canonical name which has the form:
154 CPU-COMPANY-SYSTEM
156 where SYSTEM can have one of these forms:
158 OS KERNEL-OS
160 See the file `config.sub' for the possible values of each field. If
162 `config.sub' isn't included in this package, then this package doesn't
163 need to know the machine type.
164 If you are _building_ compiler tools for cross-compiling, you should
166 use the `--target=TYPE' option to select the type of system they will
167 produce code for.
168 If you want to _use_ a cross compiler, that generates code for a
170 platform different from the build platform, you should specify the
171 "host" platform (i.e., that on which the generated programs will
172 eventually be run) with `--host=TYPE'.
173 Sharing Defaults
175 ================
176 If you want to set default values for `configure' scripts to share,
178 you can create a site shell script called `config.site' that gives
179 default values for variables like `CC', `cache_file', and `prefix'.
180 `configure' looks for `PREFIX/share/config.site' if it exists, then
181 `PREFIX/etc/config.site' if it exists. Or, you can set the
182 `CONFIG_SITE' environment variable to the location of the site script.
183 A warning: not all `configure' scripts look for a site script.
184 Defining Variables
186 ==================
187 Variables not defined in a site shell script can be set in the
189 environment passed to `configure'. However, some packages may run
190 configure again during the build, and the customized values of these
191 variables may be lost. In order to avoid this problem, you should set
192 them in the `configure' command line, using `VAR=value'. For example:
193 ./configure CC=/usr/local2/bin/gcc
195 will cause the specified gcc to be used as the C compiler (unless it is
197 overridden in the site shell script).
198 `configure' Invocation
200 ======================
201 `configure' recognizes the following options to control how it
203 operates.
204 `--help'
206 `-h'
207 Print a summary of the options to `configure', and exit.
208 `--version'
210 `-V'
211 Print the version of Autoconf used to generate the `configure'
212 script, and exit.
213 `--cache-file=FILE'
215 Enable the cache: use and save the results of the tests in FILE,
216 traditionally `config.cache'. FILE defaults to `/dev/null' to
217 disable caching.
218 `--config-cache'
220 `-C'
221 Alias for `--cache-file=config.cache'.
222 `--quiet'
224 `--silent'
225 `-q'
226 Do not print messages saying which checks are being made. To
227 suppress all normal output, redirect it to `/dev/null' (any error
228 messages will still be shown).
229 `--srcdir=DIR'
231 Look for the package's source code in directory DIR. Usually
232 `configure' can determine that directory automatically.
233 `configure' also accepts some other, not widely useful, options. Run
235 `configure --help' for more details.
236Version 3.1.0 26 Jul 2009 eXosip2_install(3)