1vboxgetty.conf(5) Linux System Administration vboxgetty.conf(5)
2
3
4
6 vboxgetty.conf - config file for vboxgetty
7
9 The file /etc/isdn/vboxgetty.conf is used to configure vboxgetty.
10 Please read the man page vboxgetty(8) for a description of how
11 vboxgetty works.
12
13 Everything after "#" is ignored, as are empty lines. All arguments must
14 be separated by whitespace (spaces, tabs). Arguments may not contain
15 whitespace.
16
17 All settings before the first port command are global settings, after a
18 port command they only affect the current port.
19
20 port <string>
21 ISDN device to configure.
22
23 modeminit <string>
24 Command to initialize the modem. You should set the MSN/EAZ on
25 which vboxgetty should listen for incoming calls. Default is
26 "ATZ".
27
28 user <string>
29 Name of the user that vboxgetty will use. This user must exist
30 in /etc/passwd and you must use this parameter.
31
32 group <string>
33 Name of the group that vboxgetty will use. This group must exist
34 in /etc/group and you must use this parameter.
35
36 umask <number>
37 Vboxgetty will use this umask when creating new files. You must
38 give the umask as an octal number. Default is 077.
39
40 dropdtrtime <seconds>
41 Number of milliseconds to hold the DTR-Line low to reset the
42 modem. Default value is 800.
43
44 initpause <number>
45 Number of milliseconds to wait after initializing the modem.
46 This is used to compensate the delay of the "NO CARRIER"
47 response. Default value is 1500.
48
49 badinitsexit <number>
50 Maximum failures with modeminit. If this number is reached,
51 vboxgetty exits. Default is 0.
52
53
54 ringtimeout <number>
55 Time in seconds to wait for a RING. If no RING is received
56 within this time, no call is taken. Default is 5.
57
58 echotimeout <number>
59 Time in seconds to wait for the echo from the modem. Default is
60 4.
61
62 commandtimeout <number>
63 Time in seconds to wait for a response to a modem command.
64 Default is 4.
65
66 alivetimeout <number>
67 After this time in seconds vboxgetty will check if the modem is
68 still responding to modem commands. Default is 1800.
69
70 compression <string>
71 Audio compression to use to record new messages. Possible values
72 are ADPCM-2, ADPCM-3, ADPCM-4 and ULAW. The ALAW compression
73 mode is no longer supported. Default is ULAW.
74
75 spooldir <string>
76 Spool directory to use. This directory must exist. It's used for
77 control files of several programs. Default is
78 /var/spool/vbox/<user>.
79
80 vboxconfig <string>
81 Full path of the vbox config file. Default value is
82 <spooldir>/vbox.conf.
83
84 freespace <number>
85 Number of bytes that must be available on the partition with the
86 spool directory, so that a call may be taken. Default is 0.
87
88 debuglevel <string>
89 What messages are be written to
90 /var/log/vbox/vboxgetty-<device>.log. The string consists of
91 letters representing the severities of the messages to log
92 (F=FATAL, E=ERROR, W=WARNING, I=INFO, D=DEBUG, J=JUNK). Default
93 is FEWI.
94
96 /etc/isdn/vboxgetty.conf
97 this configuration file
98
100 vboxgetty(8), vbox(5), vboxtcl(5)
101
103 This manual page was written by Andreas Jellinghaus <aj@dun‐
104 geon.inka.de>, for Debian GNU/Linux and isdn4linux.
105
106
107
108ISDN 4 Linux 3.13 2003/03/11 vboxgetty.conf(5)