powerman-pdu(8)

1POWERMAN-PDU(8)                   NUT Manual                   POWERMAN-PDU(8)
2
3
4

NAME

6       powerman-pdu - Driver for Powerman PDU
7

SYNOPSIS

9       powerman-pdu -h
10
11       powerman-pdu -a PDU_NAME [OPTIONS]
12
13           Note
14           This man page only documents the hardware-specific features of the
15           powerman-pdu driver. For information about the core driver, see
16           nutupsdrv(8).
17

SUPPORTED HARDWARE

19       This driver supports a wide range of PDUs through the Powerman project.
20
21       This includes various models from APC, Baytech, Cyclades, but also
22       support IPMI and various blade management modules from HP, IBM and Sun.
23

EXTRA ARGUMENTS

25       This driver doesn’t support any optional settings.
26

INSTALLATION

28       This driver is not built by default. You can build it by using
29       "configure --with-powerman=yes".
30

UPS COMMANDS

32       The following instant commands (see upscmd(8)) are available for each
33       outlet of the PDU, with X standing for the outlet number:
34
35       outlet.X.load.on
36           Power on the outlet.
37
38       outlet.X.load.off
39           Power off the outlet.
40
41       outlet.X.load.cycle
42           Cycle the outlet (power off then power on, possibly with a delay).
43

IMPLEMENTATION

45       The hostname of the Powerman server is specified using the "port" value
46       in ups.conf, i.e.:
47
48           [pdu]
49                   driver = powerman-pdu
50                   port = host.example.com:port
51
52       The port used to reach powermand is optional if the default port is
53       used.
54

KNOWN ISSUES

56       In the current NUT version (2.4.1), ups.status is still exposed, with
57       the value "WAIT". Some other values from the ups collection are also
58       exposed.
59

AUTHOR

61       Arnaud Quette <arnaud.quette@gmail.com>
62