1XRDB(1) General Commands Manual XRDB(1)
2
6 xrdb - X server resource database utility
7
9 xrdb [-option ...] [filename]
10
12 Xrdb is used to get or set the contents of the RESOURCE_MANAGER prop‐
13 erty on the root window of screen 0, or the SCREEN_RESOURCES property
14 on the root window of any or all screens, or everything combined. You
15 would normally run this program from your X startup file.
16 Most X clients use the RESOURCE_MANAGER and SCREEN_RESOURCES properties
18 to get user preferences about color, fonts, and so on for applications.
19 Having this information in the server (where it is available to all
20 clients) instead of on disk, solves the problem in previous versions of
21 X that required you to maintain defaults files on every machine that
22 you might use. It also allows for dynamic changing of defaults without
23 editing files.
24 The RESOURCE_MANAGER property is used for resources that apply to all
26 screens of the display. The SCREEN_RESOURCES property on each screen
27 specifies additional (or overriding) resources to be used for that
28 screen. (When there is only one screen, SCREEN_RESOURCES is normally
29 not used, all resources are just placed in the RESOURCE_MANAGER prop‐
30 erty.)
31 The file specified by filename (or the contents from standard input if
33 - or no filename is given) is optionally passed through the C pre‐
34 processor with the following symbols defined, based on the capabilities
35 of the server being used:
36 SERVERHOST=hostname
38 the hostname portion of the display to which you are connected.
39 SRVR_name
41 the SERVERHOST hostname string turned into a legal identifier.
42 For example, "my-dpy.lcs.mit.edu" becomes
43 SRVR_my_dpy_lcs_mit_edu.
44 HOST=hostname
46 the same as SERVERHOST.
47 DISPLAY_NUM=num
49 the number of the display on the server host.
50 CLIENTHOST=hostname
52 the name of the host on which xrdb is running.
53 CLNT_name
55 the CLIENTHOST hostname string turned into a legal identifier.
56 For example, "expo.lcs.mit.edu" becomes CLNT_expo_lcs_mit_edu.
57 RELEASE=num
59 the vendor release number for the server. The interpretation
60 of this number will vary depending on VENDOR.
61 REVISION=num
63 the X protocol minor version supported by this server (cur‐
64 rently 0).
65 VERSION=num
67 the X protocol major version supported by this server (should
68 always be 11).
69 VENDOR="vendor"
71 a string literal specifying the vendor of the server.
72 VNDR_name
74 the VENDOR name string turned into a legal identifier. For
75 example, "MIT X Consortium" becomes VNDR_MIT_X_Consortium.
76 EXT_name
78 A symbol is defined for each protocol extension supported by
79 the server. Each extension string name is turned into a legal
80 identifier. For example, "X3D-PEX" becomes EXT_X3D_PEX.
81 NUM_SCREENS=num
83 the total number of screens.
84 SCREEN_NUM=num
86 the number of the current screen (from zero).
87 BITS_PER_RGB=num
89 the number of significant bits in an RGB color specification.
90 This is the log base 2 of the number of distinct shades of each
91 primary that the hardware can generate. Note that it usually
92 is not related to PLANES.
93 CLASS=visualclass
95 one of StaticGray, GrayScale, StaticColor, PseudoColor, True‐
96 Color, DirectColor. This is the visual class of the root win‐
97 dow.
98 CLASS_visualclass=visualid
100 the visual class of the root window in a form you can #ifdef
101 on. The value is the numeric id of the visual.
102 COLOR defined only if CLASS is one of StaticColor, PseudoColor, True‐
104 Color, or DirectColor.
105 CLASS_visualclass_depth=num
107 A symbol is defined for each visual supported for the screen.
108 The symbol includes the class of the visual and its depth; the
109 value is the numeric id of the visual. (If more than one vis‐
110 ual has the same class and depth, the numeric id of the first
111 one reported by the server is used.)
112 HEIGHT=num
114 the height of the root window in pixels.
115 WIDTH=num
117 the width of the root window in pixels.
118 PLANES=num
120 the number of bit planes (the depth) of the root window.
121 X_RESOLUTION=num
123 the x resolution of the screen in pixels per meter.
124 Y_RESOLUTION=num
126 the y resolution of the screen in pixels per meter.
127 SRVR_name, CLNT_name, VNDR_name, and EXT_name identifiers are formed by
129 changing all characters other than letters and digits into underscores
130 (_).
131 Lines that begin with an exclamation mark (!) are ignored and may be
133 used as comments.
134 Note that since xrdb can read from standard input, it can be used to
136 the change the contents of properties directly from a terminal or from
137 a shell script.
138
140 xrdb program accepts the following options:
141 -help This option (or any unsupported option) will cause a brief
143 description of the allowable options and parameters to be
144 printed.
145 -display display
147 This option specifies the X server to be used; see X(7). It
148 also specifies the screen to use for the -screen option, and it
149 specifies the screen from which preprocessor symbols are
150 derived for the -global option.
151 -all This option indicates that operation should be performed on the
153 screen-independent resource property (RESOURCE_MANAGER), as
154 well as the screen-specific property (SCREEN_RESOURCES) on
155 every screen of the display. For example, when used in con‐
156 junction with -query, the contents of all properties are out‐
157 put. For -load, -override and -merge, the input file is pro‐
158 cessed once for each screen. The resources which occur in com‐
159 mon in the output for every screen are collected, and these are
160 applied as the screen-independent resources. The remaining
161 resources are applied for each individual per-screen property.
162 This the default mode of operation.
163 -global This option indicates that the operation should only be per‐
165 formed on the screen-independent RESOURCE_MANAGER property.
166 -screen This option indicates that the operation should only be per‐
168 formed on the SCREEN_RESOURCES property of the default screen
169 of the display.
170 -screens
172 This option indicates that the operation should be performed on
173 the SCREEN_RESOURCES property of each screen of the display.
174 For -load, -override and -merge, the input file is processed
175 for each screen.
176 -n This option indicates that changes to the specified properties
178 (when used with -load, -override or -merge) or to the resource
179 file (when used with -edit) should be shown on the standard
180 output, but should not be performed.
181 -quiet This option indicates that warning about duplicate entries
183 should not be displayed.
184 -cpp filename
186 This option specifies the pathname of the C preprocessor pro‐
187 gram to be used. Although xrdb was designed to use CPP, any
188 program that acts as a filter and accepts the -D, -I, and -U
189 options may be used.
190 -nocpp This option indicates that xrdb should not run the input file
192 through a preprocessor before loading it into properties.
193 -symbols
195 This option indicates that the symbols that are defined for the
196 preprocessor should be printed onto the standard output.
197 -query This option indicates that the current contents of the speci‐
199 fied properties should be printed onto the standard output.
200 Note that since preprocessor commands in the input resource
201 file are part of the input file, not part of the property, they
202 won't appear in the output from this option. The -edit option
203 can be used to merge the contents of properties back into the
204 input resource file without damaging preprocessor commands.
205 -load This option indicates that the input should be loaded as the
207 new value of the specified properties, replacing whatever was
208 there (i.e. the old contents are removed). This is the
209 default action.
210 -override
212 This option indicates that the input should be added to,
213 instead of replacing, the current contents of the specified
214 properties. New entries override previous entries.
215 -merge This option indicates that the input should be merged and lexi‐
217 cographically sorted with, instead of replacing, the current
218 contents of the specified properties.
219 -remove This option indicates that the specified properties should be
221 removed from the server.
222 -retain This option indicates that the server should be instructed not
224 to reset if xrdb is the first client. This should never be
225 necessary under normal conditions, since xdm and xinit always
226 act as the first client.
227 -edit filename
229 This option indicates that the contents of the specified prop‐
230 erties should be edited into the given file, replacing any val‐
231 ues already listed there. This allows you to put changes that
232 you have made to your defaults back into your resource file,
233 preserving any comments or preprocessor lines.
234 -backup string
236 This option specifies a suffix to be appended to the filename
237 used with -edit to generate a backup file.
238 -Dname[=value]
240 This option is passed through to the preprocessor and is used
241 to define symbols for use with conditionals such as #ifdef.
242 -Uname This option is passed through to the preprocessor and is used
244 to remove any definitions of this symbol.
245 -Idirectory
247 This option is passed through to the preprocessor and is used
248 to specify a directory to search for files that are referenced
249 with #include.
250
252 Generalizes ~/.Xdefaults files.
253
255 X(7), appres(1), listres(1), Xlib Resource Manager documentation, Xt
256 resource documentation
257
259 DISPLAY to figure out which display to use.
260
262 The default for no arguments should be to query, not to overwrite, so
263 that it is consistent with other programs.
264
266 Bob Scheifler, Phil Karlton, rewritten from the original by Jim Gettys
267X Version 11 xrdb 1.0.9 XRDB(1)