1CTDB-SCRIPT.OPTIO(5) CTDB - clustered TDB database CTDB-SCRIPT.OPTIO(5)
2
6 ctdb-script.options - CTDB scripts configuration files
7
9 Each CTDB script has 2 possible locations for its configuration
10 options:
11 /etc/ctdb/script.options
13 This is a catch-all global file for general purpose scripts and for
14 options that are used in multiple event scripts.
15 SCRIPT.options
17 That is, options for SCRIPT are placed in a file alongside the
18 script, with a ".script" suffix added. This style is usually
19 recommended for event scripts.
20 Options in this script-specific file override those in the global
22 file.
23 These files should include simple shell-style variable assignments and
25 shell-style comments.
26
28 10.interface
29 This event script handles monitoring of interfaces using by public IP
30 addresses.
31 CTDB_PARTIALLY_ONLINE_INTERFACES=yes|no
33 Whether one or more offline interfaces should cause a monitor event
34 to fail if there are other interfaces that are up. If this is "yes"
35 and a node has some interfaces that are down then ctdb status will
36 display the node as "PARTIALLYONLINE".
37 Note that CTDB_PARTIALLY_ONLINE_INTERFACES=yes is not generally
39 compatible with NAT gateway or LVS. NAT gateway relies on the
40 interface configured by CTDB_NATGW_PUBLIC_IFACE to be up and LVS
41 replies on CTDB_LVS_PUBLIC_IFACE to be up. CTDB does not check if
42 these options are set in an incompatible way so care is needed to
43 understand the interaction.
44 Default is "no".
46 11.natgw
48 Provides CTDB's NAT gateway functionality.
49 NAT gateway is used to configure fallback routing for nodes when they
51 do not host any public IP addresses. For example, it allows unhealthy
52 nodes to reliably communicate with external infrastructure. One node in
53 a NAT gateway group will be designated as the NAT gateway master node
54 and other (slave) nodes will be configured with fallback routes via the
55 NAT gateway master node. For more information, see the NAT GATEWAY
56 section in ctdb(7).
57 CTDB_NATGW_DEFAULT_GATEWAY=IPADDR
59 IPADDR is an alternate network gateway to use on the NAT gateway
60 master node. If set, a fallback default route is added via this
61 network gateway.
62 No default. Setting this variable is optional - if not set that no
64 route is created on the NAT gateway master node.
65 CTDB_NATGW_NODES=FILENAME
67 FILENAME contains the list of nodes that belong to the same NAT
68 gateway group.
69 File format:
71 IPADDR [slave-only]
73 IPADDR is the private IP address of each node in the NAT gateway
76 group.
77 If "slave-only" is specified then the corresponding node can not be
79 the NAT gateway master node. In this case CTDB_NATGW_PUBLIC_IFACE
80 and CTDB_NATGW_PUBLIC_IP are optional and unused.
81 No default, usually /etc/ctdb/natgw_nodes when enabled.
83 CTDB_NATGW_PRIVATE_NETWORK=IPADDR/MASK
85 IPADDR/MASK is the private sub-network that is internally routed
86 via the NAT gateway master node. This is usually the private
87 network that is used for node addresses.
88 No default.
90 CTDB_NATGW_PUBLIC_IFACE=IFACE
92 IFACE is the network interface on which the CTDB_NATGW_PUBLIC_IP
93 will be configured.
94 No default.
96 CTDB_NATGW_PUBLIC_IP=IPADDR/MASK
98 IPADDR/MASK indicates the IP address that is used for outgoing
99 traffic (originating from CTDB_NATGW_PRIVATE_NETWORK) on the NAT
100 gateway master node. This must not be a configured public IP
101 address.
102 No default.
104 CTDB_NATGW_STATIC_ROUTES=IPADDR/MASK[@GATEWAY] ...
106 Each IPADDR/MASK identifies a network or host to which NATGW should
107 create a fallback route, instead of creating a single default
108 route. This can be used when there is already a default route, via
109 an interface that can not reach required infrastructure, that
110 overrides the NAT gateway default route.
111 If GATEWAY is specified then the corresponding route on the NATGW
113 master node will be via GATEWAY. Such routes are created even if
114 CTDB_NATGW_DEFAULT_GATEWAY is not specified. If GATEWAY is not
115 specified for some networks then routes are only created on the
116 NATGW master node for those networks if CTDB_NATGW_DEFAULT_GATEWAY
117 is specified.
118 This should be used with care to avoid causing traffic to
120 unnecessarily double-hop through the NAT gateway master, even when
121 a node is hosting public IP addresses. Each specified network or
122 host should probably have a corresponding automatically created
123 link route or static route to avoid this.
124 No default.
126 Example
128 CTDB_NATGW_NODES=/etc/ctdb/natgw_nodes
129 CTDB_NATGW_PRIVATE_NETWORK=192.168.1.0/24
130 CTDB_NATGW_DEFAULT_GATEWAY=10.0.0.1
131 CTDB_NATGW_PUBLIC_IP=10.0.0.227/24
132 CTDB_NATGW_PUBLIC_IFACE=eth0
133 A variation that ensures that infrastructure (ADS, DNS, ...)
136 directly attached to the public network (10.0.0.0/24) is always
137 reachable would look like this:
138 CTDB_NATGW_NODES=/etc/ctdb/natgw_nodes
140 CTDB_NATGW_PRIVATE_NETWORK=192.168.1.0/24
141 CTDB_NATGW_PUBLIC_IP=10.0.0.227/24
142 CTDB_NATGW_PUBLIC_IFACE=eth0
143 CTDB_NATGW_STATIC_ROUTES=10.0.0.0/24
144 Note that CTDB_NATGW_DEFAULT_GATEWAY is not specified.
147 13.per_ip_routing
149 Provides CTDB's policy routing functionality.
150 A node running CTDB may be a component of a complex network topology.
152 In particular, public addresses may be spread across several different
153 networks (or VLANs) and it may not be possible to route packets from
154 these public addresses via the system's default route. Therefore, CTDB
155 has support for policy routing via the 13.per_ip_routing eventscript.
156 This allows routing to be specified for packets sourced from each
157 public address. The routes are added and removed as CTDB moves public
158 addresses between nodes.
159 For more information, see the POLICY ROUTING section in ctdb(7).
161 CTDB_PER_IP_ROUTING_CONF=FILENAME
163 FILENAME contains elements for constructing the desired routes for
164 each source address.
165 The special FILENAME value __auto_link_local__ indicates that no
167 configuration file is provided and that CTDB should generate
168 reasonable link-local routes for each public IP address.
169 File format:
171 IPADDR DEST-IPADDR/MASK [GATEWAY-IPADDR]
173 No default, usually /etc/ctdb/policy_routing when enabled.
176 CTDB_PER_IP_ROUTING_RULE_PREF=NUM
178 NUM sets the priority (or preference) for the routing rules that
179 are added by CTDB.
180 This should be (strictly) greater than 0 and (strictly) less than
182 32766. A priority of 100 is recommended, unless this conflicts with
183 a priority already in use on the system. See ip(8), for more
184 details.
185 CTDB_PER_IP_ROUTING_TABLE_ID_LOW=LOW-NUM,
187 CTDB_PER_IP_ROUTING_TABLE_ID_HIGH=HIGH-NUM
188 CTDB determines a unique routing table number to use for the
189 routing related to each public address. LOW-NUM and HIGH-NUM
190 indicate the minimum and maximum routing table numbers that are
191 used.
192 ip(8) uses some reserved routing table numbers below 255.
194 Therefore, CTDB_PER_IP_ROUTING_TABLE_ID_LOW should be (strictly)
195 greater than 255.
196 CTDB uses the standard file /etc/iproute2/rt_tables to maintain a
198 mapping between the routing table numbers and labels. The label for
199 a public address ADDR will look like ctdb.addr. This means that the
200 associated rules and routes are easy to read (and manipulate).
201 No default, usually 1000 and 9000.
203 Example
205 CTDB_PER_IP_ROUTING_CONF=/etc/ctdb/policy_routing
206 CTDB_PER_IP_ROUTING_RULE_PREF=100
207 CTDB_PER_IP_ROUTING_TABLE_ID_LOW=1000
208 CTDB_PER_IP_ROUTING_TABLE_ID_HIGH=9000
209 91.lvs
212 Provides CTDB's LVS functionality.
213 For a general description see the LVS section in ctdb(7).
215 CTDB_LVS_NODES=FILENAME
217 FILENAME contains the list of nodes that belong to the same LVS
218 group.
219 File format:
221 IPADDR [slave-only]
223 IPADDR is the private IP address of each node in the LVS group.
226 If "slave-only" is specified then the corresponding node can not be
228 the LVS master node. In this case CTDB_LVS_PUBLIC_IFACE and
229 CTDB_LVS_PUBLIC_IP are optional and unused.
230 No default, usually /etc/ctdb/lvs_nodes when enabled.
232 CTDB_LVS_PUBLIC_IFACE=INTERFACE
234 INTERFACE is the network interface that clients will use to
235 connection to CTDB_LVS_PUBLIC_IP. This is optional for slave-only
236 nodes. No default.
237 CTDB_LVS_PUBLIC_IP=IPADDR
239 CTDB_LVS_PUBLIC_IP is the LVS public address. No default.
240
242 CTDB can be configured to manage and/or monitor various NAS (and other)
243 services via its eventscripts.
244 In the simplest case CTDB will manage a service. This means the service
246 will be started and stopped along with CTDB, CTDB will monitor the
247 service and CTDB will do any required reconfiguration of the service
248 when public IP addresses are failed over.
249 20.multipathd
251 Provides CTDB's Linux multipathd service management.
252 It can monitor multipath devices to ensure that active paths are
254 available.
255 CTDB_MONITOR_MPDEVICES=MP-DEVICE-LIST
257 MP-DEVICE-LIST is a list of multipath devices for CTDB to monitor?
258 No default.
260 31.clamd
262 This event script provide CTDB's ClamAV anti-virus service management.
263 This eventscript is not enabled by default. Use ctdb enablescript to
265 enable it.
266 CTDB_CLAMD_SOCKET=FILENAME
268 FILENAME is the socket to monitor ClamAV.
269 No default.
271 49.winbind
273 Provides CTDB's Samba winbind service management.
274 CTDB_SERVICE_WINBIND=SERVICE
276 Distribution specific SERVICE for managing winbindd.
277 Default is "winbind".
279 50.samba
281 Provides the core of CTDB's Samba file service management.
282 CTDB_SAMBA_CHECK_PORTS=PORT-LIST
284 When monitoring Samba, check TCP ports in space-separated
285 PORT-LIST.
286 Default is to monitor ports that Samba is configured to listen on.
288 CTDB_SAMBA_SKIP_SHARE_CHECK=yes|no
290 As part of monitoring, should CTDB skip the check for the existence
291 of each directory configured as share in Samba. This may be
292 desirable if there is a large number of shares.
293 Default is no.
295 CTDB_SERVICE_NMB=SERVICE
297 Distribution specific SERVICE for managing nmbd.
298 Default is distribution-dependant.
300 CTDB_SERVICE_SMB=SERVICE
302 Distribution specific SERVICE for managing smbd.
303 Default is distribution-dependant.
305 60.nfs
307 This event script (along with 06.nfs) provides CTDB's NFS service
308 management.
309 This includes parameters for the kernel NFS server. Alternative NFS
311 subsystems (such as NFS-Ganesha[1]) can be integrated using
312 CTDB_NFS_CALLOUT.
313 CTDB_NFS_CALLOUT=COMMAND
315 COMMAND specifies the path to a callout to handle interactions with
316 the configured NFS system, including startup, shutdown, monitoring.
317 Default is the included nfs-linux-kernel-callout.
319 CTDB_NFS_CHECKS_DIR=DIRECTORY
321 Specifies the path to a DIRECTORY containing files that describe
322 how to monitor the responsiveness of NFS RPC services. See the
323 README file for this directory for an explanation of the contents
324 of these "check" files.
325 CTDB_NFS_CHECKS_DIR can be used to point to different sets of
327 checks for different NFS servers.
328 One way of using this is to have it point to, say,
330 /etc/ctdb/nfs-checks-enabled.d and populate it with symbolic links
331 to the desired check files. This avoids duplication and is
332 upgrade-safe.
333 Default is /etc/ctdb/nfs-checks.d, which contains NFS RPC checks
335 suitable for Linux kernel NFS.
336 CTDB_NFS_SKIP_SHARE_CHECK=yes|no
338 As part of monitoring, should CTDB skip the check for the existence
339 of each directory exported via NFS. This may be desirable if there
340 is a large number of exports.
341 Default is no.
343 CTDB_RPCINFO_LOCALHOST=IPADDR|HOSTNAME
345 IPADDR or HOSTNAME indicates the address that rpcinfo should
346 connect to when doing rpcinfo check on IPv4 RPC service during
347 monitoring. Optimally this would be "localhost". However, this can
348 add some performance overheads.
349 Default is "127.0.0.1".
351 CTDB_RPCINFO_LOCALHOST6=IPADDR|HOSTNAME
353 IPADDR or HOSTNAME indicates the address that rpcinfo should
354 connect to when doing rpcinfo check on IPv6 RPC service during
355 monitoring. Optimally this would be "localhost6" (or similar).
356 However, this can add some performance overheads.
357 Default is "::1".
359 CTDB_NFS_STATE_FS_TYPE=TYPE
361 The type of filesystem used for a clustered NFS' shared state. No
362 default.
363 CTDB_NFS_STATE_MNT=DIR
365 The directory where a clustered NFS' shared state will be located.
366 No default.
367 70.iscsi
369 Provides CTDB's Linux iSCSI tgtd service management.
370 CTDB_START_ISCSI_SCRIPTS=DIRECTORY
372 DIRECTORY on shared storage containing scripts to start tgtd for
373 each public IP address.
374 No default.
376
378 CTDB checks the consistency of databases during startup.
379 00.ctdb
381 CTDB_MAX_CORRUPT_DB_BACKUPS=NUM
382 NUM is the maximum number of volatile TDB database backups to be
383 kept (for each database) when a corrupt database is found during
384 startup. Volatile TDBs are zeroed during startup so backups are
385 needed to debug any corruption that occurs before a restart.
386 Default is 10.
388
390 05.system
391 Provides CTDB's filesystem and memory usage monitoring.
392 CTDB can experience seemingly random (performance and other) issues if
394 system resources become too constrained. Options in this section can be
395 enabled to allow certain system resources to be checked. They allows
396 warnings to be logged and nodes to be marked unhealthy when system
397 resource usage reaches the configured thresholds.
398 Some checks are enabled by default. It is recommended that these checks
400 remain enabled or are augmented by extra checks. There is no supported
401 way of completely disabling the checks.
402 CTDB_MONITOR_FILESYSTEM_USAGE=FS-LIMIT-LIST
404 FS-LIMIT-LIST is a space-separated list of
405 FILESYSTEM:WARN_LIMIT[:UNHEALTHY_LIMIT] triples indicating that
406 warnings should be logged if the space used on FILESYSTEM reaches
407 WARN_LIMIT%. If usage reaches UNHEALTHY_LIMIT then the node should
408 be flagged unhealthy. Either WARN_LIMIT or UNHEALTHY_LIMIT may be
409 left blank, meaning that check will be omitted.
410 Default is to warn for each filesystem containing a database
412 directory (volatile database directory,
413 persistent database directory, state database directory) with a
414 threshold of 90%.
415 CTDB_MONITOR_MEMORY_USAGE=MEM-LIMITS
417 MEM-LIMITS takes the form WARN_LIMIT[:UNHEALTHY_LIMIT] indicating
418 that warnings should be logged if memory usage reaches WARN_LIMIT%.
419 If usage reaches UNHEALTHY_LIMIT then the node should be flagged
420 unhealthy. Either WARN_LIMIT or UNHEALTHY_LIMIT may be left blank,
421 meaning that check will be omitted.
422 Default is 80, so warnings will be logged when memory usage reaches
424 80%.
425 CTDB_MONITOR_SWAP_USAGE=SWAP-LIMITS
427 SWAP-LIMITS takes the form WARN_LIMIT[:UNHEALTHY_LIMIT] indicating
428 that warnings should be logged if swap usage reaches WARN_LIMIT%.
429 If usage reaches UNHEALTHY_LIMIT then the node should be flagged
430 unhealthy. Either WARN_LIMIT or UNHEALTHY_LIMIT may be left blank,
431 meaning that check will be omitted.
432 Default is 25, so warnings will be logged when swap usage reaches
434 25%.
435
437 debug-hung-script.sh
438 CTDB_DEBUG_HUNG_SCRIPT_STACKPAT=REGEXP
439 REGEXP specifies interesting processes for which stack traces
440 should be logged when debugging hung eventscripts and those
441 processes are matched in pstree output. REGEXP is an extended
442 regexp so choices are separated by pipes ('|'). However, REGEXP
443 should not contain parentheses. See also the ctdb.conf(5) [event]
444 "debug script" option.
445 Default is "exportfs|rpcinfo".
447
449 /etc/ctdb/script.options
450
452 ctdbd(1), ctdb(7), http://ctdb.samba.org/
453
455 This documentation was written by Amitay Isaacs, Martin Schwenke
456
458 Copyright © 2007 Andrew Tridgell, Ronnie Sahlberg
459 This program is free software; you can redistribute it and/or modify it
461 under the terms of the GNU General Public License as published by the
462 Free Software Foundation; either version 3 of the License, or (at your
463 option) any later version.
464 This program is distributed in the hope that it will be useful, but
466 WITHOUT ANY WARRANTY; without even the implied warranty of
467 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
468 General Public License for more details.
469 You should have received a copy of the GNU General Public License along
471 with this program; if not, see http://www.gnu.org/licenses.
472
475 1. NFS-Ganesha
476 https://github.com/nfs-ganesha/nfs-ganesha/wiki
477ctdb 05/14/2019 CTDB-SCRIPT.OPTIO(5)