1CTDB-SCRIPT.OPTIO(5) CTDB - clustered TDB database CTDB-SCRIPT.OPTIO(5)
2
6 ctdb-script.options - CTDB scripts configuration files
7
9 Each CTDB script has 2 possible locations for its configuration
10 options:
11 /etc/ctdb/script.options
13 This is a catch-all global file for general purpose scripts and for
14 options that are used in multiple event scripts.
15 SCRIPT.options
17 That is, options for SCRIPT are placed in a file alongside the
18 script, with a ".script" suffix added. This style is usually
19 recommended for event scripts.
20 Options in this script-specific file override those in the global
22 file.
23 These files should include simple shell-style variable assignments and
25 shell-style comments.
26
28 10.interface
29 This event script handles monitoring of interfaces using by public IP
30 addresses.
31 CTDB_PARTIALLY_ONLINE_INTERFACES=yes|no
33 Whether one or more offline interfaces should cause a monitor event
34 to fail if there are other interfaces that are up. If this is "yes"
35 and a node has some interfaces that are down then ctdb status will
36 display the node as "PARTIALLYONLINE".
37 Note that CTDB_PARTIALLY_ONLINE_INTERFACES=yes is not generally
39 compatible with NAT gateway or LVS. NAT gateway relies on the
40 interface configured by CTDB_NATGW_PUBLIC_IFACE to be up and LVS
41 replies on CTDB_LVS_PUBLIC_IFACE to be up. CTDB does not check if
42 these options are set in an incompatible way so care is needed to
43 understand the interaction.
44 Default is "no".
46 11.natgw
48 Provides CTDB's NAT gateway functionality.
49 NAT gateway is used to configure fallback routing for nodes when they
51 do not host any public IP addresses. For example, it allows unhealthy
52 nodes to reliably communicate with external infrastructure. One node in
53 a NAT gateway group will be designated as the NAT gateway leader node
54 and other (follower) nodes will be configured with fallback routes via
55 the NAT gateway leader node. For more information, see the NAT GATEWAY
56 section in ctdb(7).
57 CTDB_NATGW_DEFAULT_GATEWAY=IPADDR
59 IPADDR is an alternate network gateway to use on the NAT gateway
60 leader node. If set, a fallback default route is added via this
61 network gateway.
62 No default. Setting this variable is optional - if not set that no
64 route is created on the NAT gateway leader node.
65 CTDB_NATGW_NODES=FILENAME
67 FILENAME contains the list of nodes that belong to the same NAT
68 gateway group.
69 File format:
71 IPADDR [follower-only]
73 IPADDR is the private IP address of each node in the NAT gateway
76 group.
77 If "follower-only" is specified then the corresponding node can not
79 be the NAT gateway leader node. In this case
80 CTDB_NATGW_PUBLIC_IFACE and CTDB_NATGW_PUBLIC_IP are optional and
81 unused.
82 No default, usually /etc/ctdb/natgw_nodes when enabled.
84 CTDB_NATGW_PRIVATE_NETWORK=IPADDR/MASK
86 IPADDR/MASK is the private sub-network that is internally routed
87 via the NAT gateway leader node. This is usually the private
88 network that is used for node addresses.
89 No default.
91 CTDB_NATGW_PUBLIC_IFACE=IFACE
93 IFACE is the network interface on which the CTDB_NATGW_PUBLIC_IP
94 will be configured.
95 No default.
97 CTDB_NATGW_PUBLIC_IP=IPADDR/MASK
99 IPADDR/MASK indicates the IP address that is used for outgoing
100 traffic (originating from CTDB_NATGW_PRIVATE_NETWORK) on the NAT
101 gateway leader node. This must not be a configured public IP
102 address.
103 No default.
105 CTDB_NATGW_STATIC_ROUTES=IPADDR/MASK[@GATEWAY] ...
107 Each IPADDR/MASK identifies a network or host to which NATGW should
108 create a fallback route, instead of creating a single default
109 route. This can be used when there is already a default route, via
110 an interface that can not reach required infrastructure, that
111 overrides the NAT gateway default route.
112 If GATEWAY is specified then the corresponding route on the NATGW
114 leader node will be via GATEWAY. Such routes are created even if
115 CTDB_NATGW_DEFAULT_GATEWAY is not specified. If GATEWAY is not
116 specified for some networks then routes are only created on the
117 NATGW leader node for those networks if CTDB_NATGW_DEFAULT_GATEWAY
118 is specified.
119 This should be used with care to avoid causing traffic to
121 unnecessarily double-hop through the NAT gateway leader, even when
122 a node is hosting public IP addresses. Each specified network or
123 host should probably have a corresponding automatically created
124 link route or static route to avoid this.
125 No default.
127 Example
129 CTDB_NATGW_NODES=/etc/ctdb/natgw_nodes
130 CTDB_NATGW_PRIVATE_NETWORK=192.168.1.0/24
131 CTDB_NATGW_DEFAULT_GATEWAY=10.0.0.1
132 CTDB_NATGW_PUBLIC_IP=10.0.0.227/24
133 CTDB_NATGW_PUBLIC_IFACE=eth0
134 A variation that ensures that infrastructure (ADS, DNS, ...)
137 directly attached to the public network (10.0.0.0/24) is always
138 reachable would look like this:
139 CTDB_NATGW_NODES=/etc/ctdb/natgw_nodes
141 CTDB_NATGW_PRIVATE_NETWORK=192.168.1.0/24
142 CTDB_NATGW_PUBLIC_IP=10.0.0.227/24
143 CTDB_NATGW_PUBLIC_IFACE=eth0
144 CTDB_NATGW_STATIC_ROUTES=10.0.0.0/24
145 Note that CTDB_NATGW_DEFAULT_GATEWAY is not specified.
148 13.per_ip_routing
150 Provides CTDB's policy routing functionality.
151 A node running CTDB may be a component of a complex network topology.
153 In particular, public addresses may be spread across several different
154 networks (or VLANs) and it may not be possible to route packets from
155 these public addresses via the system's default route. Therefore, CTDB
156 has support for policy routing via the 13.per_ip_routing eventscript.
157 This allows routing to be specified for packets sourced from each
158 public address. The routes are added and removed as CTDB moves public
159 addresses between nodes.
160 For more information, see the POLICY ROUTING section in ctdb(7).
162 CTDB_PER_IP_ROUTING_CONF=FILENAME
164 FILENAME contains elements for constructing the desired routes for
165 each source address.
166 The special FILENAME value __auto_link_local__ indicates that no
168 configuration file is provided and that CTDB should generate
169 reasonable link-local routes for each public IP address.
170 File format:
172 IPADDR DEST-IPADDR/MASK [GATEWAY-IPADDR]
174 No default, usually /etc/ctdb/policy_routing when enabled.
177 CTDB_PER_IP_ROUTING_RULE_PREF=NUM
179 NUM sets the priority (or preference) for the routing rules that
180 are added by CTDB.
181 This should be (strictly) greater than 0 and (strictly) less than
183 32766. A priority of 100 is recommended, unless this conflicts with
184 a priority already in use on the system. See ip(8), for more
185 details.
186 CTDB_PER_IP_ROUTING_TABLE_ID_LOW=LOW-NUM,
188 CTDB_PER_IP_ROUTING_TABLE_ID_HIGH=HIGH-NUM
189 CTDB determines a unique routing table number to use for the
190 routing related to each public address. LOW-NUM and HIGH-NUM
191 indicate the minimum and maximum routing table numbers that are
192 used.
193 ip(8) uses some reserved routing table numbers below 255.
195 Therefore, CTDB_PER_IP_ROUTING_TABLE_ID_LOW should be (strictly)
196 greater than 255.
197 CTDB uses the standard file /etc/iproute2/rt_tables to maintain a
199 mapping between the routing table numbers and labels. The label for
200 a public address ADDR will look like ctdb.addr. This means that the
201 associated rules and routes are easy to read (and manipulate).
202 No default, usually 1000 and 9000.
204 Example
206 CTDB_PER_IP_ROUTING_CONF=/etc/ctdb/policy_routing
207 CTDB_PER_IP_ROUTING_RULE_PREF=100
208 CTDB_PER_IP_ROUTING_TABLE_ID_LOW=1000
209 CTDB_PER_IP_ROUTING_TABLE_ID_HIGH=9000
210 91.lvs
213 Provides CTDB's LVS functionality.
214 For a general description see the LVS section in ctdb(7).
216 CTDB_LVS_NODES=FILENAME
218 FILENAME contains the list of nodes that belong to the same LVS
219 group.
220 File format:
222 IPADDR [follower-only]
224 IPADDR is the private IP address of each node in the LVS group.
227 If "follower-only" is specified then the corresponding node can not
229 be the LVS leader node. In this case CTDB_LVS_PUBLIC_IFACE and
230 CTDB_LVS_PUBLIC_IP are optional and unused.
231 No default, usually /etc/ctdb/lvs_nodes when enabled.
233 CTDB_LVS_PUBLIC_IFACE=INTERFACE
235 INTERFACE is the network interface that clients will use to
236 connection to CTDB_LVS_PUBLIC_IP. This is optional for
237 follower-only nodes. No default.
238 CTDB_LVS_PUBLIC_IP=IPADDR
240 CTDB_LVS_PUBLIC_IP is the LVS public address. No default.
241
243 CTDB can be configured to manage and/or monitor various NAS (and other)
244 services via its eventscripts.
245 In the simplest case CTDB will manage a service. This means the service
247 will be started and stopped along with CTDB, CTDB will monitor the
248 service and CTDB will do any required reconfiguration of the service
249 when public IP addresses are failed over.
250 20.multipathd
252 Provides CTDB's Linux multipathd service management.
253 It can monitor multipath devices to ensure that active paths are
255 available.
256 CTDB_MONITOR_MPDEVICES=MP-DEVICE-LIST
258 MP-DEVICE-LIST is a list of multipath devices for CTDB to monitor?
259 No default.
261 31.clamd
263 This event script provide CTDB's ClamAV anti-virus service management.
264 This eventscript is not enabled by default. Use ctdb enablescript to
266 enable it.
267 CTDB_CLAMD_SOCKET=FILENAME
269 FILENAME is the socket to monitor ClamAV.
270 No default.
272 48.netbios
274 Provides CTDB's NetBIOS service management.
275 CTDB_SERVICE_NMB=SERVICE
277 Distribution specific SERVICE for managing nmbd.
278 Default is distribution-dependant.
280 49.winbind
282 Provides CTDB's Samba winbind service management.
283 CTDB_SERVICE_WINBIND=SERVICE
285 Distribution specific SERVICE for managing winbindd.
286 Default is "winbind".
288 50.samba
290 Provides the core of CTDB's Samba file service management.
291 CTDB_SAMBA_CHECK_PORTS=PORT-LIST
293 When monitoring Samba, check TCP ports in space-separated
294 PORT-LIST.
295 Default is to monitor ports that Samba is configured to listen on.
297 CTDB_SAMBA_SKIP_SHARE_CHECK=yes|no
299 As part of monitoring, should CTDB skip the check for the existence
300 of each directory configured as share in Samba. This may be
301 desirable if there is a large number of shares.
302 Default is no.
304 CTDB_SERVICE_SMB=SERVICE
306 Distribution specific SERVICE for managing smbd.
307 Default is distribution-dependant.
309 60.nfs
311 This event script (along with 06.nfs) provides CTDB's NFS service
312 management.
313 This includes parameters for the kernel NFS server. Alternative NFS
315 subsystems (such as NFS-Ganesha[1]) can be integrated using
316 CTDB_NFS_CALLOUT.
317 CTDB_NFS_CALLOUT=COMMAND
319 COMMAND specifies the path to a callout to handle interactions with
320 the configured NFS system, including startup, shutdown, monitoring.
321 Default is the included nfs-linux-kernel-callout.
323 CTDB_NFS_CHECKS_DIR=DIRECTORY
325 Specifies the path to a DIRECTORY containing files that describe
326 how to monitor the responsiveness of NFS RPC services. See the
327 README file for this directory for an explanation of the contents
328 of these "check" files.
329 CTDB_NFS_CHECKS_DIR can be used to point to different sets of
331 checks for different NFS servers.
332 One way of using this is to have it point to, say,
334 /etc/ctdb/nfs-checks-enabled.d and populate it with symbolic links
335 to the desired check files. This avoids duplication and is
336 upgrade-safe.
337 Default is /etc/ctdb/nfs-checks.d, which contains NFS RPC checks
339 suitable for Linux kernel NFS.
340 CTDB_NFS_SKIP_SHARE_CHECK=yes|no
342 As part of monitoring, should CTDB skip the check for the existence
343 of each directory exported via NFS. This may be desirable if there
344 is a large number of exports.
345 Default is no.
347 CTDB_RPCINFO_LOCALHOST=IPADDR|HOSTNAME
349 IPADDR or HOSTNAME indicates the address that rpcinfo should
350 connect to when doing rpcinfo check on IPv4 RPC service during
351 monitoring. Optimally this would be "localhost". However, this can
352 add some performance overheads.
353 Default is "127.0.0.1".
355 CTDB_RPCINFO_LOCALHOST6=IPADDR|HOSTNAME
357 IPADDR or HOSTNAME indicates the address that rpcinfo should
358 connect to when doing rpcinfo check on IPv6 RPC service during
359 monitoring. Optimally this would be "localhost6" (or similar).
360 However, this can add some performance overheads.
361 Default is "::1".
363 CTDB_NFS_STATE_FS_TYPE=TYPE
365 The type of filesystem used for a clustered NFS' shared state. No
366 default.
367 CTDB_NFS_STATE_MNT=DIR
369 The directory where a clustered NFS' shared state will be located.
370 No default.
371 70.iscsi
373 Provides CTDB's Linux iSCSI tgtd service management.
374 CTDB_START_ISCSI_SCRIPTS=DIRECTORY
376 DIRECTORY on shared storage containing scripts to start tgtd for
377 each public IP address.
378 No default.
380
382 CTDB checks the consistency of databases during startup.
383 00.ctdb
385 CTDB_MAX_CORRUPT_DB_BACKUPS=NUM
386 NUM is the maximum number of volatile TDB database backups to be
387 kept (for each database) when a corrupt database is found during
388 startup. Volatile TDBs are zeroed during startup so backups are
389 needed to debug any corruption that occurs before a restart.
390 Default is 10.
392
394 05.system
395 Provides CTDB's filesystem and memory usage monitoring.
396 CTDB can experience seemingly random (performance and other) issues if
398 system resources become too constrained. Options in this section can be
399 enabled to allow certain system resources to be checked. They allows
400 warnings to be logged and nodes to be marked unhealthy when system
401 resource usage reaches the configured thresholds.
402 Some checks are enabled by default. It is recommended that these checks
404 remain enabled or are augmented by extra checks. There is no supported
405 way of completely disabling the checks.
406 CTDB_MONITOR_FILESYSTEM_USAGE=FS-LIMIT-LIST
408 FS-LIMIT-LIST is a space-separated list of
409 FILESYSTEM:WARN_LIMIT[:UNHEALTHY_LIMIT] triples indicating that
410 warnings should be logged if the space used on FILESYSTEM reaches
411 WARN_LIMIT%. If usage reaches UNHEALTHY_LIMIT then the node should
412 be flagged unhealthy. Either WARN_LIMIT or UNHEALTHY_LIMIT may be
413 left blank, meaning that check will be omitted.
414 Default is to warn for each filesystem containing a database
416 directory (volatile database directory,
417 persistent database directory, state database directory) with a
418 threshold of 90%.
419 CTDB_MONITOR_MEMORY_USAGE=MEM-LIMITS
421 MEM-LIMITS takes the form WARN_LIMIT[:UNHEALTHY_LIMIT] indicating
422 that warnings should be logged if memory usage reaches WARN_LIMIT%.
423 If usage reaches UNHEALTHY_LIMIT then the node should be flagged
424 unhealthy. Either WARN_LIMIT or UNHEALTHY_LIMIT may be left blank,
425 meaning that check will be omitted.
426 Default is 80, so warnings will be logged when memory usage reaches
428 80%.
429
431 debug-hung-script.sh
432 CTDB_DEBUG_HUNG_SCRIPT_STACKPAT=REGEXP
433 REGEXP specifies interesting processes for which stack traces
434 should be logged when debugging hung eventscripts and those
435 processes are matched in pstree output. REGEXP is an extended
436 regexp so choices are separated by pipes ('|'). However, REGEXP
437 should not contain parentheses. See also the ctdb.conf(5) [event]
438 "debug script" option.
439 Default is "exportfs|rpcinfo".
441
443 /etc/ctdb/script.options
444
446 ctdbd(1), ctdb(7), http://ctdb.samba.org/
447
449 This documentation was written by Amitay Isaacs, Martin Schwenke
450
452 Copyright © 2007 Andrew Tridgell, Ronnie Sahlberg
453 This program is free software; you can redistribute it and/or modify it
455 under the terms of the GNU General Public License as published by the
456 Free Software Foundation; either version 3 of the License, or (at your
457 option) any later version.
458 This program is distributed in the hope that it will be useful, but
460 WITHOUT ANY WARRANTY; without even the implied warranty of
461 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
462 General Public License for more details.
463 You should have received a copy of the GNU General Public License along
465 with this program; if not, see http://www.gnu.org/licenses.
466
469 1. NFS-Ganesha
470 https://github.com/nfs-ganesha/nfs-ganesha/wiki
471ctdb 06/01/2021 CTDB-SCRIPT.OPTIO(5)