1SLAPD(8C)                                                            SLAPD(8C)
2
3
4

NAME

6       slapd - Stand-alone LDAP Daemon
7

SYNOPSIS

9       slapd                 [-4|-6]                [-T {acl|a[dd]|auth|c[at]|
10       d[n]|i[ndex]|p[asswd]|s[chema]|t[est]}] [-d debug-level] [-f slapd-con‐
11       fig-file]   [-F slapd-config-directory]   [-h URLs]   [-n service-name]
12       [-s syslog-level] [-l syslog-local-user] [-o option[=value]] [-r direc‐
13       tory] [-u user] [-g group] [-c cookie]
14

DESCRIPTION

16       Slapd  is  the stand-alone LDAP daemon. It listens for LDAP connections
17       on any number of ports (default 389), responding to the LDAP operations
18       it receives over these connections.  slapd is typically invoked at boot
19       time, usually out of /etc/rc.local.  Upon startup, slapd normally forks
20       and  disassociates  itself from the invoking tty.  If configured in the
21       config file (or config directory), the slapd  process  will  print  its
22       process  ID (see getpid(2)) to a .pid file, as well as the command line
23       options during invocation to an .args file (see slapd.conf(5)).  If the
24       -d  flag  is  given, even with a zero argument, slapd will not fork and
25       disassociate from the invoking tty.
26
27       See the "OpenLDAP Administrator's Guide" for more details on slapd.
28

OPTIONS

30       -4     Listen on IPv4 addresses only.
31
32       -6     Listen on IPv6 addresses only.
33
34       -T tool
35              Run in Tool mode. The tool argument selects whether  to  run  as
36              slapadd,  slapcat, slapdn, slapindex, slappasswd, slapschema, or
37              slaptest (slapacl and slapauth need  the  entire  acl  and  auth
38              option  value  to  be spelled out, as a is reserved to slapadd).
39              This option should be the first  option  specified  when  it  is
40              used;  any  remaining  options will be interpreted by the corre‐
41              sponding slap tool program,  according  to  the  respective  man
42              pages.   Note  that these tool programs will usually be symbolic
43              links to slapd.  This option is provided  for  situations  where
44              symbolic links are not provided or not usable.
45
46       -d debug-level
47              Turn  on debugging as defined by debug-level.  If this option is
48              specified, even with a zero argument, slapd  will  not  fork  or
49              disassociate from the invoking terminal.  Some general operation
50              and status messages are printed for any  value  of  debug-level.
51              debug-level  is taken as a bit string, with each bit correspond‐
52              ing  to  a  different  kind  of  debugging   information.    See
53              <ldap_log.h>  for  details.   Comma-separated arrays of friendly
54              names can be specified to select debugging output of the  corre‐
55              sponding debugging information.  All the names recognized by the
56              loglevel directive described in slapd.conf(5) are supported.  If
57              debug-level  is  ?, a list of installed debug-levels is printed,
58              and slapd exits.
59
60              Remember that if you turn on packet logging, packets  containing
61              bind  passwords  will be output, so if you redirect the log to a
62              logfile, that file should be read-protected.
63
64       -s syslog-level
65              This option tells slapd at what debug-level debugging statements
66              should  be  logged to the syslog(8) facility.  The value syslog-
67              level can be set to any value or combination allowed by  the  -d
68              switch.  Slapd logs all messages selected by syslog-level at the
69              syslog(3) severity debug-level DEBUG, on the unit specified with
70              -l.
71
72       -n service-name
73              Specifies  the  service  name  for  logging  and other purposes.
74              Defaults to basename of argv[0], i.e.: "slapd".
75
76       -l syslog-local-user
77              Selects the local user of the syslog(8) facility. Value  can  be
78              LOCAL0, through LOCAL7, as well as USER and DAEMON.  The default
79              is LOCAL4.  However, this option is only  permitted  on  systems
80              that  support  local users with the syslog(8) facility.  Logging
81              to syslog(8) occurs at the "DEBUG" severity debug-level.
82
83       -f slapd-config-file
84              Specifies  the  slapd  configuration  file.   The   default   is
85              /etc/openldap/slapd.conf.
86
87       -F slapd-config-directory
88              Specifies  the  slapd  configuration  directory.  The default is
89              /etc/openldap/slapd.d.  If both -f and  -F  are  specified,  the
90              config  file will be read and converted to config directory for‐
91              mat and written to the specified directory.  If  neither  option
92              is  specified,  slapd  will  attempt  to read the default config
93              directory before trying to use the default  config  file.  If  a
94              valid  config  directory  exists then the default config file is
95              ignored. All of the slap  tools  that  use  the  config  options
96              observe this same behavior.
97
98       -h URLlist
99              slapd  will  by  default  serve  ldap:///  (LDAP over TCP on all
100              interfaces on default LDAP port).  That is, it will  bind  using
101              INADDR_ANY  and  port 389.  The -h option may be used to specify
102              LDAP (and other scheme) URLs to serve.  For example, if slapd is
103              given  -h  "ldap://127.0.0.1:9009/ ldaps:/// ldapi:///", it will
104              listen on 127.0.0.1:9009 for LDAP,  0.0.0.0:636  for  LDAP  over
105              TLS, and LDAP over IPC (Unix domain sockets).  Host 0.0.0.0 rep‐
106              resents INADDR_ANY (any interface).  A space separated  list  of
107              URLs  is  expected.   The  URLs should be of the LDAP, LDAPS, or
108              LDAPI schemes, and generally without  a  DN  or  other  optional
109              parameters (excepting as discussed below).  Support for the lat‐
110              ter two  schemes  depends  on  selected  configuration  options.
111              Hosts may be specified by name or IPv4 and IPv6 address formats.
112              Ports, if specified, must be numeric.  The default ldap://  port
113              is 389 and the default ldaps:// port is 636.
114
115              For  LDAP  over IPC, name is the name of the socket, and no port
116              is required, nor allowed; note that directory separators must be
117              URL-encoded, like any other characters that are special to URLs;
118              so the socket
119
120                      /usr/local/var/ldapi
121
122              must be specified as
123
124                      ldapi://%2Fusr%2Flocal%2Fvar%2Fldapi
125
126              The default location for the IPC socket is /var/run/ldapi
127
128              The listener permissions are  indicated  by  "x-mod=-rwxrwxrwx",
129              "x-mod=0777"  or  "x-mod=777", where any of the "rwx" can be "-"
130              to suppress the related permission, while any of the "7" can  be
131              any legal octal digit, according to chmod(1).  The listeners can
132              take advantage of the "x-mod" extension to apply  rough  limita‐
133              tions  to  operations,  e.g.  allow  read operations ("r", which
134              applies to search and compare),  write  operations  ("w",  which
135              applies  to  add, delete, modify and modrdn), and execute opera‐
136              tions ("x", which means bind is required).   "User"  permissions
137              apply  to  authenticated users, while "other" apply to anonymous
138              users;  "group"   permissions   are   ignored.    For   example,
139              "ldap:///????x-mod=-rw-------" means that read and write is only
140              allowed for authenticated connections, and bind is required  for
141              all  operations.   This feature is experimental, and requires to
142              be manually enabled at configure time.
143
144       -r directory
145              Specifies a directory to become the root directory.  slapd  will
146              change  the current working directory to this directory and then
147              chroot(2) to this directory.  This is done after opening listen‐
148              ers  but  before  reading any configuration file or initializing
149              any backend.  When used as a security mechanism,  it  should  be
150              used in conjunction with -u and -g options.
151
152       -u user
153              slapd  will  run  slapd  with the specified user name or id, and
154              that user's supplementary group access list as  set  with  init‐
155              groups(3).   The  group  ID  is also changed to this user's gid,
156              unless the -g option is used to override.  Note when  used  with
157              -r, slapd will use the user database in the change root environ‐
158              ment.
159
160              Note that on some systems, running as a non-privileged user will
161              prevent passwd back-ends from accessing the encrypted passwords.
162              Note also that any shell back-ends will  run  as  the  specified
163              non-privileged user.
164
165       -g group
166              slapd  will  run with the specified group name or id.  Note when
167              used with -r, slapd will use the group database  in  the  change
168              root environment.
169
170       -c cookie
171              This  option provides a cookie for the syncrepl replication con‐
172              sumer.  The cookie is  a  comma  separated  list  of  name=value
173              pairs.  Currently supported syncrepl cookie fields are rid, sid,
174              and csn.  rid identifies a replication thread  within  the  con‐
175              sumer  server  and is used to find the syncrepl specification in
176              slapd.conf(5) or slapd-config(5) having the matching replication
177              identifier  in its definition. The rid must be provided in order
178              for any other specified values to be used.  sid is the server id
179              in  a multi-master/mirror-mode configuration.  csn is the commit
180              sequence number received by a previous synchronization and  rep‐
181              resents the state of the consumer replica content which the syn‐
182              crepl engine will synchronize to the current  provider  content.
183              In  case  of  mirror-mode or multi-master replication agreement,
184              multiple csn values, semicolon separated, can appear.  Use  only
185              the rid part to force a full reload.
186
187       -o option[=value]
188              This  option provides a generic means to specify options without
189              the need to reserve a separate letter for them.
190
191              It supports the following options:
192
193              slp={on|off|slp-attrs}
194                     When SLP support  is  compiled  into  slapd,  disable  it
195                     (off),
196                      enable it by registering at SLP DAs without specific SLP
197                     attributes (on), or with  specific  SLP  attributes  slp-
198                     attrs  that  must  be  an  SLP  attribute list definition
199                     according to the SLP standard.
200
201                     For  example,  "slp=(tree=production),(server-type=OpenL‐
202                     DAP),(server-version=2.4.15)"  registers  at SLP DAs with
203                     the three SLP attributes tree,  server-type  and  server-
204                     version  that  have  the values given above.  This allows
205                     one to specifically query the SLP DAs  for  LDAP  servers
206                     holding  the  production  tree in case multiple trees are
207                     available.
208

EXAMPLES

210       To start slapd and have it fork and detach from the terminal and  start
211       serving  the  LDAP  databases  defined in the default config file, just
212       type:
213
214            slapd
215
216       To start slapd with an alternate configuration file, and turn on  volu‐
217       minous debugging which will be printed on standard error, type:
218
219            slapd -f /var/tmp/slapd.conf -d 255
220
221       To test whether the configuration file is correct or not, type:
222
223            slapd -Tt
224

SEE ALSO

226       ldap(3),  slapd.conf(5),  slapd-config(5), slapd.access(5), slapacl(8),
227       slapadd(8), slapauth(8),  slapcat(8),  slapdn(8),  slapindex(8),  slap‐
228       passwd(8), slapschema(8), slaptest(8).
229
230       "OpenLDAP Administrator's Guide" (http://www.OpenLDAP.org/doc/admin/)
231

BUGS

233       See http://www.openldap.org/its/
234

ACKNOWLEDGEMENTS

236       OpenLDAP  Software  is developed and maintained by The OpenLDAP Project
237       <http://www.openldap.org/>.  OpenLDAP Software is derived from the Uni‐
238       versity of Michigan LDAP 3.3 Release.
239
240
241
242OpenLDAP 2.4.46                   2018/03/22                         SLAPD(8C)
Impressum