1SLAPD(8C) SLAPD(8C)
2
6 slapd - Stand-alone LDAP Daemon
7
9 slapd [-V[V[V]] [-4|-6] [-T {acl|a[dd]|auth|c[at]| d[n]|i[ndex]|p[as‐
10 swd]|s[chema]|t[est]}] [-d debug-level] [-f slapd-config-file]
11 [-F slapd-config-directory] [-h URLs] [-n service-name] [-s syslog-
12 level] [-l syslog-local-user] [-o option[=value]] [-r directory]
13 [-u user] [-g group] [-c cookie]
14
16 Slapd is the stand-alone LDAP daemon. It listens for LDAP connections
17 on any number of ports (default 389), responding to the LDAP operations
18 it receives over these connections. slapd is typically invoked at boot
19 time, usually out of /etc/rc.local. Upon startup, slapd normally forks
20 and disassociates itself from the invoking tty. If configured in the
21 config file (or config directory), the slapd process will print its
22 process ID (see getpid(2)) to a .pid file, as well as the command line
23 options during invocation to an .args file (see slapd.conf(5)). If the
24 -d flag is given, even with a zero argument, slapd will not fork and
25 disassociate from the invoking tty.
26 See the "OpenLDAP Administrator's Guide" for more details on slapd.
28
30 -V[V[V]]
31 Print version info and proceed with startup. If -VV is given,
32 exit after providing version info. If -VVV is given, addition‐
33 ally provide information on static overlays and backends.
34 -4 Listen on IPv4 addresses only.
36 -6 Listen on IPv6 addresses only.
38 -T tool
40 Run in Tool mode. The tool argument selects whether to run as
41 slapadd, slapcat, slapdn, slapindex, slappasswd, slapschema, or
42 slaptest (slapacl and slapauth need the entire acl and auth op‐
43 tion value to be spelled out, as a is reserved to slapadd).
44 This option should be the first option specified when it is
45 used; any remaining options will be interpreted by the corre‐
46 sponding slap tool program, according to the respective man
47 pages. Note that these tool programs will usually be symbolic
48 links to slapd. This option is provided for situations where
49 symbolic links are not provided or not usable.
50 -d debug-level
52 Turn on debugging as defined by debug-level. If this option is
53 specified, even with a zero argument, slapd will not fork or
54 disassociate from the invoking terminal. Some general operation
55 and status messages are printed for any value of debug-level.
56 debug-level is taken as a bit string, with each bit correspond‐
57 ing to a different kind of debugging information. See
58 <ldap_log.h> for details. Comma-separated arrays of friendly
59 names can be specified to select debugging output of the corre‐
60 sponding debugging information. All the names recognized by the
61 loglevel directive described in slapd.conf(5) are supported. If
62 debug-level is ?, a list of installed debug-levels is printed,
63 and slapd exits.
64 Remember that if you turn on packet logging, packets containing
66 bind passwords will be output, so if you redirect the log to a
67 logfile, that file should be read-protected.
68 -s syslog-level
70 This option tells slapd at what debug-level debugging statements
71 should be logged to the syslog(8) facility. The value syslog-
72 level can be set to any value or combination allowed by the -d
73 switch. Slapd logs all messages selected by syslog-level at the
74 syslog(3) severity debug-level DEBUG, on the unit specified with
75 -l.
76 -n service-name
78 Specifies the service name for logging and other purposes. De‐
79 faults to basename of argv[0], i.e.: "slapd".
80 -l syslog-local-user
82 Selects the local user of the syslog(8) facility. Value can be
83 LOCAL0, through LOCAL7, as well as USER and DAEMON. The default
84 is LOCAL4. However, this option is only permitted on systems
85 that support local users with the syslog(8) facility. Logging
86 to syslog(8) occurs at the "DEBUG" severity debug-level.
87 -f slapd-config-file
89 Specifies the slapd configuration file. The default is
90 /etc/openldap/slapd.conf.
91 -F slapd-config-directory
93 Specifies the slapd configuration directory. The default is
94 /etc/openldap/slapd.d. If both -f and -F are specified, the
95 config file will be read and converted to config directory for‐
96 mat and written to the specified directory. If neither option
97 is specified, slapd will attempt to read the default config di‐
98 rectory before trying to use the default config file. If a valid
99 config directory exists then the default config file is ignored.
100 All of the slap tools that use the config options observe this
101 same behavior.
102 -h URLlist
104 slapd will by default serve ldap:/// (LDAP over TCP on all in‐
105 terfaces on default LDAP port). That is, it will bind using IN‐
106 ADDR_ANY and port 389. The -h option may be used to specify
107 LDAP (and other scheme) URLs to serve. For example, if slapd is
108 given -h "ldap://127.0.0.1:9009/ ldaps:/// ldapi:///", it will
109 listen on 127.0.0.1:9009 for LDAP, 0.0.0.0:636 for LDAP over
110 TLS, and LDAP over IPC (Unix domain sockets). Host 0.0.0.0 rep‐
111 resents INADDR_ANY (any interface). A space separated list of
112 URLs is expected. The URLs should be of the LDAP, PLDAP, LDAPS,
113 PLDAPS, or LDAPI schemes, and generally without a DN or other
114 optional parameters (excepting as discussed below). Support for
115 the latter three schemes depends on selected configuration op‐
116 tions. Hosts may be specified by name or IPv4 and IPv6 address
117 formats. Ports, if specified, must be numeric. The default
118 ldap:// port is 389 and the default ldaps:// port is 636, same
119 for the proxy enabled variants.
120 The PLDAP and PLDAPS URL schemes provide support for the HAProxy
122 proxy protocol version 2, which allows a load balancer or proxy
123 server to provide the remote client IP address to slapd to be
124 used for access control or logging. Ports configured for PLDAP
125 or PLDAPS will only accept connections that include the neces‐
126 sary proxy protocol header. Connections to these ports should be
127 restricted at the network level to only trusted load balancers
128 or proxies to avoid spoofing of client IP addresses by third
129 parties.
130 For LDAP over IPC, name is the name of the socket, and no port
132 is required, nor allowed; note that directory separators must be
133 URL-encoded, like any other characters that are special to URLs;
134 so the socket
135 /usr/local/var/ldapi
137 must be specified as
139 ldapi://%2Fusr%2Flocal%2Fvar%2Fldapi
141 The default location for the IPC socket is /var/run/ldapi
143 The listener permissions are indicated by "x-mod=-rwxrwxrwx",
145 "x-mod=0777" or "x-mod=777", where any of the "rwx" can be "-"
146 to suppress the related permission, while any of the "7" can be
147 any legal octal digit, according to chmod(1). The listeners can
148 take advantage of the "x-mod" extension to apply rough limita‐
149 tions to operations, e.g. allow read operations ("r", which ap‐
150 plies to search and compare), write operations ("w", which ap‐
151 plies to add, delete, modify and modrdn), and execute operations
152 ("x", which means bind is required). "User" permissions apply
153 to authenticated users, while "other" apply to anonymous users;
154 "group" permissions are ignored. For example,
155 "ldap:///????x-mod=-rw-------" means that read and write is only
156 allowed for authenticated connections, and bind is required for
157 all operations. This feature is experimental, and requires to
158 be manually enabled at configure time.
159 -r directory
161 Specifies a directory to become the root directory. slapd will
162 change the current working directory to this directory and then
163 chroot(2) to this directory. This is done after opening listen‐
164 ers but before reading any configuration file or initializing
165 any backend. When used as a security mechanism, it should be
166 used in conjunction with -u and -g options.
167 -u user
169 slapd will run slapd with the specified user name or id, and
170 that user's supplementary group access list as set with init‐
171 groups(3). The group ID is also changed to this user's gid, un‐
172 less the -g option is used to override. Note when used with -r,
173 slapd will use the user database in the change root environment.
174 Note that on some systems, running as a non-privileged user will
176 prevent passwd back-ends from accessing the encrypted passwords.
177 Note also that any shell back-ends will run as the specified
178 non-privileged user.
179 -g group
181 slapd will run with the specified group name or id. Note when
182 used with -r, slapd will use the group database in the change
183 root environment.
184 -c cookie
186 This option provides a cookie for the syncrepl replication con‐
187 sumer. The cookie is a comma separated list of name=value
188 pairs. Currently supported syncrepl cookie fields are rid, sid,
189 and csn. rid identifies a replication thread within the con‐
190 sumer server and is used to find the syncrepl specification in
191 slapd.conf(5) or slapd-config(5) having the matching replication
192 identifier in its definition. The rid must be provided in order
193 for any other specified values to be used. sid is the server id
194 in a multi-provider configuration. csn is the commit sequence
195 number received by a previous synchronization and represents the
196 state of the consumer content which the syncrepl engine will
197 synchronize to the current provider content. In case of multi-
198 provider replication agreement, multiple csn values, semicolon
199 separated, can appear. Use only the rid part to force a full
200 reload.
201 -o option[=value]
203 This option provides a generic means to specify options without
204 the need to reserve a separate letter for them.
205 It supports the following options:
207 slp={on|off|slp-attrs}
209 When SLP support is compiled into slapd, disable it
210 (off),
211 enable it by registering at SLP DAs without specific SLP
212 attributes (on), or with specific SLP attributes slp-at‐
213 trs that must be an SLP attribute list definition accord‐
214 ing to the SLP standard.
215 For example, "slp=(tree=production),(server-type=OpenL‐
217 DAP),(server-version=2.4.15)" registers at SLP DAs with
218 the three SLP attributes tree, server-type and server-
219 version that have the values given above. This allows
220 one to specifically query the SLP DAs for LDAP servers
221 holding the production tree in case multiple trees are
222 available.
223
225 To start slapd and have it fork and detach from the terminal and start
226 serving the LDAP databases defined in the default config file, just
227 type:
228 slapd
230 To start slapd with an alternate configuration file, and turn on volu‐
232 minous debugging which will be printed on standard error, type:
233 slapd -f /var/tmp/slapd.conf -d 255
235 To test whether the configuration file is correct or not, type:
237 slapd -Tt
239
241 ldap(3), slapd.conf(5), slapd-config(5), slapd.access(5), slapacl(8),
242 slapadd(8), slapauth(8), slapcat(8), slapdn(8), slapindex(8), slap‐
243 passwd(8), slapschema(8), slaptest(8).
244 "OpenLDAP Administrator's Guide" (http://www.OpenLDAP.org/doc/admin/)
246
248 See http://www.openldap.org/its/
249
251 OpenLDAP Software is developed and maintained by The OpenLDAP Project
252 <http://www.openldap.org/>. OpenLDAP Software is derived from the Uni‐
253 versity of Michigan LDAP 3.3 Release.
254OpenLDAP 2.6.2 2022/05/04 SLAPD(8C)