1tlp_selinux(8)                SELinux Policy tlp                tlp_selinux(8)
2
3
4

NAME

6       tlp_selinux - Security Enhanced Linux Policy for the tlp processes
7

DESCRIPTION

9       Security-Enhanced  Linux  secures the tlp processes via flexible manda‐
10       tory access control.
11
12       The tlp processes execute with the tlp_t SELinux type. You can check if
13       you  have  these processes running by executing the ps command with the
14       -Z qualifier.
15
16       For example:
17
18       ps -eZ | grep tlp_t
19
20
21

ENTRYPOINTS

23       The tlp_t SELinux type can be entered via the tlp_exec_t file type.
24
25       The default entrypoint paths for the tlp_t domain are the following:
26
27       /usr/sbin/tlp
28

PROCESS TYPES

30       SELinux defines process types (domains) for each process running on the
31       system
32
33       You can see the context of a process using the -Z option to ps
34
35       Policy  governs  the  access confined processes have to files.  SELinux
36       tlp policy is very flexible allowing users to setup their tlp processes
37       in as secure a method as possible.
38
39       The following process types are defined for tlp:
40
41       tlp_t
42
43       Note: semanage permissive -a tlp_t can be used to make the process type
44       tlp_t permissive. SELinux does not deny access  to  permissive  process
45       types, but the AVC (SELinux denials) messages are still generated.
46
47

BOOLEANS

49       SELinux  policy  is  customizable  based on least access required.  tlp
50       policy is extremely flexible and has several booleans that allow you to
51       manipulate the policy and run tlp with the tightest access possible.
52
53
54
55       If you want to allow all domains to execute in fips_mode, you must turn
56       on the fips_mode boolean. Enabled by default.
57
58       setsebool -P fips_mode 1
59
60
61

MANAGED FILES

63       The SELinux process type tlp_t can manage files labeled with  the  fol‐
64       lowing  file  types.   The paths listed are the default paths for these
65       file types.  Note the processes UID still need to have DAC permissions.
66
67       cluster_conf_t
68
69            /etc/cluster(/.*)?
70
71       cluster_var_lib_t
72
73            /var/lib/pcsd(/.*)?
74            /var/lib/cluster(/.*)?
75            /var/lib/openais(/.*)?
76            /var/lib/pengine(/.*)?
77            /var/lib/corosync(/.*)?
78            /usr/lib/heartbeat(/.*)?
79            /var/lib/heartbeat(/.*)?
80            /var/lib/pacemaker(/.*)?
81
82       cluster_var_run_t
83
84            /var/run/crm(/.*)?
85            /var/run/cman_.*
86            /var/run/rsctmp(/.*)?
87            /var/run/aisexec.*
88            /var/run/heartbeat(/.*)?
89            /var/run/corosync-qnetd(/.*)?
90            /var/run/corosync-qdevice(/.*)?
91            /var/run/corosync.pid
92            /var/run/cpglockd.pid
93            /var/run/rgmanager.pid
94            /var/run/cluster/rgmanager.sk
95
96       root_t
97
98            /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
99            /
100            /initrd
101
102       sysfs_t
103
104            /sys(/.*)?
105
106       tlp_var_lib_t
107
108            /var/lib/tlp(/.*)?
109
110       tlp_var_run_t
111
112            /var/run/tlp(/.*)?
113
114

FILE CONTEXTS

116       SELinux requires files to have an extended attribute to define the file
117       type.
118
119       You can see the context of a file using the -Z option to ls
120
121       Policy  governs  the  access  confined  processes  have to these files.
122       SELinux tlp policy is very flexible allowing users to setup  their  tlp
123       processes in as secure a method as possible.
124
125       STANDARD FILE CONTEXT
126
127       SELinux  defines  the  file context types for the tlp, if you wanted to
128       store files with these types in a diffent paths, you  need  to  execute
129       the  semanage  command  to  sepecify  alternate  labeling  and then use
130       restorecon to put the labels on disk.
131
132       semanage fcontext -a -t tlp_unit_file_t '/srv/mytlp_content(/.*)?'
133       restorecon -R -v /srv/mytlp_content
134
135       Note: SELinux often uses regular expressions  to  specify  labels  that
136       match multiple files.
137
138       The following file types are defined for tlp:
139
140
141
142       tlp_exec_t
143
144       - Set files with the tlp_exec_t type, if you want to transition an exe‐
145       cutable to the tlp_t domain.
146
147
148
149       tlp_unit_file_t
150
151       - Set files with the tlp_unit_file_t type, if you  want  to  treat  the
152       files as tlp unit content.
153
154
155
156       tlp_var_lib_t
157
158       -  Set  files with the tlp_var_lib_t type, if you want to store the tlp
159       files under the /var/lib directory.
160
161
162
163       tlp_var_run_t
164
165       - Set files with the tlp_var_run_t type, if you want to store  the  tlp
166       files under the /run or /var/run directory.
167
168
169
170       Note:  File context can be temporarily modified with the chcon command.
171       If you want to permanently change the file context you need to use  the
172       semanage fcontext command.  This will modify the SELinux labeling data‐
173       base.  You will need to use restorecon to apply the labels.
174
175

COMMANDS

177       semanage fcontext can also be used to manipulate default  file  context
178       mappings.
179
180       semanage  permissive  can  also  be used to manipulate whether or not a
181       process type is permissive.
182
183       semanage module can also be used to enable/disable/install/remove  pol‐
184       icy modules.
185
186       semanage boolean can also be used to manipulate the booleans
187
188
189       system-config-selinux is a GUI tool available to customize SELinux pol‐
190       icy settings.
191
192

AUTHOR

194       This manual page was auto-generated using sepolicy manpage .
195
196

SEE ALSO

198       selinux(8), tlp(8), semanage(8), restorecon(8), chcon(1),  sepolicy(8),
199       setsebool(8)
200
201
202
203tlp                                19-05-30                     tlp_selinux(8)
Impressum