1knet_handle_compress(3) Kronosnet Programmer's Manual knet_handle_compress(3)
2
3
4
6 knet_handle_compress - Set up packet compression.
7
9 #include <libknet.h>
10
11 int knet_handle_compress(
12 knet_handle_t knet_h,
13 struct knet_handle_compress_cfg *knet_handle_compress_cfg
14 );
15
17 knet_handle_compress
18
19 knet_h - pointer to knet_handle_t
20
21 knet_handle_compress_cfg - pointer to a knet_handle_compress_cfg struc‐
22 ture
23
24 compress_model contains the model name. See "compress_level" for the
25 list of accepted values. Setting the value to "none" disables compres‐
26 sion.
27
28 compress_threshold tells the transmission thread to NOT compress any
29 packets that are smaller than the value indicated. Default 100 bytes.
30 Set to 0 to reset to the default. Set to 1 to compress everything. Max
31 accepted value is KNET_MAX_PACKET_SIZE.
32
33 compress_level is the "level" parameter for most models: zlib: 0 (no
34 compression), 1 (minimal) .. 9 (max compression). lz4: 1 (max compres‐
35 sion)... 9 (fastest compression). lz4hc: 1 (min compression) ...
36 LZ4HC_MAX_CLEVEL (16) or LZ4HC_CLEVEL_MAX (12) depending on the version
37 of lz4hc libknet was built with. lzma: 0 (minimal) .. 9 (max compres‐
38 sion) bzip2: 1 (minimal) .. 9 (max compression) For lzo2 it selects the
39 algorithm to use: 1 : lzo1x_1_compress (default) 11 : lzo1x_1_11_com‐
40 press 12 : lzo1x_1_12_compress 15 : lzo1x_1_15_compress 999:
41 lzo1x_999_compress Other values select the default algorithm. Please
42 refer to the documentation of the respective compression library for
43 guidance about setting this value.
44
45 Implementation notes:
46
47 it is possible to enable/disable compression at any time.
48
49 nodes can be using a different compression algorithm at any time.
50
51 knet does NOT implement the compression algorithm directly. it relies
52 on external libraries for this functionality. Please read the libraries
53 man pages to figure out which algorithm/compression level is best for
54 the data you are planning to transmit.
55
57 struct knet_handle_compress_cfg {
58 char compress_model[16];
59 uint32_t compress_threshold;
60 int compress_level;
61 };
62
64 knet_handle_compress returns 0 on success -1 on error and errno is set.
65 EINVAL means that either the model or the level are not supported.
66
68 knet_handle_remove_datafd(3), knet_handle_get_stats(3),
69 knet_host_add(3), knet_handle_pmtud_setfreq(3),
70 knet_handle_pmtud_get(3), knet_host_get_id_by_host_name(3),
71 knet_host_get_status(3), knet_link_get_pong_count(3),
72 knet_link_get_priority(3), knet_handle_free(3),
73 knet_handle_enable_sock_notify(3), knet_handle_get_datafd(3),
74 knet_recv(3), knet_link_get_ping_timers(3),
75 knet_log_get_subsystem_id(3), knet_host_remove(3),
76 knet_host_enable_status_change_notify(3), knet_strtoaddr(3),
77 knet_send(3), knet_handle_enable_pmtud_notify(3),
78 knet_handle_get_transport_reconnect_interval(3),
79 knet_link_get_enable(3), knet_link_set_priority(3),
80 knet_log_set_loglevel(3), knet_handle_get_channel(3),
81 knet_link_get_config(3), knet_link_get_link_list(3),
82 knet_get_transport_list(3), knet_get_transport_id_by_name(3),
83 knet_log_get_loglevel_id(3), knet_handle_new_ex(3),
84 knet_host_set_name(3), knet_addrtostr(3), knet_handle_setfwd(3),
85 knet_get_compress_list(3), knet_host_set_policy(3),
86 knet_get_transport_name_by_id(3), knet_handle_enable_filter(3),
87 knet_link_get_status(3), knet_handle_add_datafd(3), knet_send_sync(3),
88 knet_log_get_loglevel_name(3), knet_host_get_host_list(3),
89 knet_host_get_policy(3), knet_link_set_enable(3),
90 knet_link_set_pong_count(3), knet_log_get_subsystem_name(3),
91 knet_host_get_name_by_host_id(3), knet_link_clear_config(3),
92 knet_log_get_loglevel(3), knet_handle_new(3),
93 knet_handle_pmtud_getfreq(3), knet_handle_clear_stats(3),
94 knet_link_set_config(3), knet_handle_crypto(3),
95 knet_get_crypto_list(3),
96 knet_handle_set_transport_reconnect_interval(3),
97 knet_link_set_ping_timers(3)
98
100 Copyright (C) 2010-2019 Red Hat, Inc. All rights reserved.
101
102
103
104kronosnet 2019-05-09 knet_handle_compress(3)