1NVME-LNVM-DIAG-SE(1)              NVMe Manual             NVME-LNVM-DIAG-SE(1)
2
3
4

NAME

6       nvme-lnvm-diag-set-bbtbl - Set a block state in the bad block table
7

SYNOPSIS

9       nvme lnvm-diag-set-bbtbl [--namespace-id=<NUM> | -n <NUM>]
10                               [--channel-id=<CHID> | -c <CHID>]
11                               [--lun-id=<LUNID> | -l <LUNID>]
12                               [--plane-id=<PLANEID> | -p <PLANEID>]
13                               [--block-id=<BLKID> | -b <BLKID>]
14                               [--value=<NUM> | -v <NUM>]
15

DESCRIPTION

17       Set the bad block table for a given channel, lun, plane and block with
18       value v.
19
20       For each block available, the status byte is read as follows:
21
22       0: Good block 1: Bad block 2: Grown bad block 4: Device reserved block
23       8: Host-side reserved block 16: Media managed reserved block
24

OPTIONS

26       --namespace-id=<NUM>, -n <NUM>
27           Namespace id to use
28
29       --channel-id, -c
30           Channel id
31
32       --lun-id, -l
33           LUN id
34
35       --plane-id, -p
36           Plane id
37
38       --block-id, -b
39           Block id
40

EXAMPLES

42       ยท   Set channel 0, lun 0, plane 0, block 10 to bad block value 2 (grown
43           bad) on physical device /dev/nvme0
44
45           # nvme lnvm-diag-set-bbtbl /dev/nvme0 -c 0 -l 0 -p 0 -b 10 -v 2
46

NVME

48       Part of the nvme-user suite
49
50
51
52NVMe                              06/05/2018              NVME-LNVM-DIAG-SE(1)
Impressum