1thin_selinux(8) SELinux Policy thin thin_selinux(8)
2
3
4
6 thin_selinux - Security Enhanced Linux Policy for the thin processes
7
9 Security-Enhanced Linux secures the thin processes via flexible manda‐
10 tory access control.
11
12 The thin processes execute with the thin_t SELinux type. You can check
13 if you have these processes running by executing the ps command with
14 the -Z qualifier.
15
16 For example:
17
18 ps -eZ | grep thin_t
19
20
21
23 The thin_t SELinux type can be entered via the thin_exec_t file type.
24
25 The default entrypoint paths for the thin_t domain are the following:
26
27 /usr/bin/thin
28
30 SELinux defines process types (domains) for each process running on the
31 system
32
33 You can see the context of a process using the -Z option to ps
34
35 Policy governs the access confined processes have to files. SELinux
36 thin policy is very flexible allowing users to setup their thin pro‐
37 cesses in as secure a method as possible.
38
39 The following process types are defined for thin:
40
41 thin_t, thin_aeolus_configserver_t
42
43 Note: semanage permissive -a thin_t can be used to make the process
44 type thin_t permissive. SELinux does not deny access to permissive
45 process types, but the AVC (SELinux denials) messages are still gener‐
46 ated.
47
48
50 SELinux policy is customizable based on least access required. thin
51 policy is extremely flexible and has several booleans that allow you to
52 manipulate the policy and run thin with the tightest access possible.
53
54
55
56 If you want to allow all domains to execute in fips_mode, you must turn
57 on the fips_mode boolean. Enabled by default.
58
59 setsebool -P fips_mode 1
60
61
62
64 The SELinux process type thin_t can manage files labeled with the fol‐
65 lowing file types. The paths listed are the default paths for these
66 file types. Note the processes UID still need to have DAC permissions.
67
68 cluster_conf_t
69
70 /etc/cluster(/.*)?
71
72 cluster_var_lib_t
73
74 /var/lib/pcsd(/.*)?
75 /var/lib/cluster(/.*)?
76 /var/lib/openais(/.*)?
77 /var/lib/pengine(/.*)?
78 /var/lib/corosync(/.*)?
79 /usr/lib/heartbeat(/.*)?
80 /var/lib/heartbeat(/.*)?
81 /var/lib/pacemaker(/.*)?
82
83 cluster_var_run_t
84
85 /var/run/crm(/.*)?
86 /var/run/cman_.*
87 /var/run/rsctmp(/.*)?
88 /var/run/aisexec.*
89 /var/run/heartbeat(/.*)?
90 /var/run/corosync-qnetd(/.*)?
91 /var/run/corosync-qdevice(/.*)?
92 /var/run/corosync.pid
93 /var/run/cpglockd.pid
94 /var/run/rgmanager.pid
95 /var/run/cluster/rgmanager.sk
96
97 root_t
98
99 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
100 /
101 /initrd
102
103 thin_log_t
104
105 /var/log/thin.log.*
106
107 thin_var_run_t
108
109 /var/run/thin(/.*)?
110 /var/run/aeolus/thin.pid
111
112
114 SELinux requires files to have an extended attribute to define the file
115 type.
116
117 You can see the context of a file using the -Z option to ls
118
119 Policy governs the access confined processes have to these files.
120 SELinux thin policy is very flexible allowing users to setup their thin
121 processes in as secure a method as possible.
122
123 STANDARD FILE CONTEXT
124
125 SELinux defines the file context types for the thin, if you wanted to
126 store files with these types in a diffent paths, you need to execute
127 the semanage command to sepecify alternate labeling and then use
128 restorecon to put the labels on disk.
129
130 semanage fcontext -a -t thin_aeolus_configserver_var_run_t
131 '/srv/mythin_content(/.*)?'
132 restorecon -R -v /srv/mythin_content
133
134 Note: SELinux often uses regular expressions to specify labels that
135 match multiple files.
136
137 The following file types are defined for thin:
138
139
140
141 thin_aeolus_configserver_exec_t
142
143 - Set files with the thin_aeolus_configserver_exec_t type, if you want
144 to transition an executable to the thin_aeolus_configserver_t domain.
145
146
147
148 thin_aeolus_configserver_lib_t
149
150 - Set files with the thin_aeolus_configserver_lib_t type, if you want
151 to treat the files as thin aeolus configserver lib data.
152
153
154
155 thin_aeolus_configserver_log_t
156
157 - Set files with the thin_aeolus_configserver_log_t type, if you want
158 to treat the data as thin aeolus configserver log data, usually stored
159 under the /var/log directory.
160
161
162
163 thin_aeolus_configserver_var_run_t
164
165 - Set files with the thin_aeolus_configserver_var_run_t type, if you
166 want to store the thin aeolus configserver files under the /run or
167 /var/run directory.
168
169
170
171 thin_exec_t
172
173 - Set files with the thin_exec_t type, if you want to transition an
174 executable to the thin_t domain.
175
176
177
178 thin_log_t
179
180 - Set files with the thin_log_t type, if you want to treat the data as
181 thin log data, usually stored under the /var/log directory.
182
183
184
185 thin_var_run_t
186
187 - Set files with the thin_var_run_t type, if you want to store the thin
188 files under the /run or /var/run directory.
189
190
191 Paths:
192 /var/run/thin(/.*)?, /var/run/aeolus/thin.pid
193
194
195 Note: File context can be temporarily modified with the chcon command.
196 If you want to permanently change the file context you need to use the
197 semanage fcontext command. This will modify the SELinux labeling data‐
198 base. You will need to use restorecon to apply the labels.
199
200
202 semanage fcontext can also be used to manipulate default file context
203 mappings.
204
205 semanage permissive can also be used to manipulate whether or not a
206 process type is permissive.
207
208 semanage module can also be used to enable/disable/install/remove pol‐
209 icy modules.
210
211 semanage boolean can also be used to manipulate the booleans
212
213
214 system-config-selinux is a GUI tool available to customize SELinux pol‐
215 icy settings.
216
217
219 This manual page was auto-generated using sepolicy manpage .
220
221
223 selinux(8), thin(8), semanage(8), restorecon(8), chcon(1), sepolicy(8),
224 setsebool(8), thin_aeolus_configserver_selinux(8), thin_aeolus_con‐
225 figserver_selinux(8)
226
227
228
229thin 19-05-30 thin_selinux(8)