1SWAY-BAR(5) SWAY-BAR(5)
2
6 sway-bar - bar configuration file and commands
7
9 Sway allows configuring swaybar in the sway configuration file. Swaybar
10 commands must be used inside a bar { } block in the config file.
11
13 status_command <status command>
14 Executes the bar status command with sh -c. Each line of text
15 printed to stdout from this command will be displayed in the status
16 area of the bar. You may also use the i3bar JSON protocol:
17 https://i3wm.org/docs/i3bar-protocol.html
19 pango_markup <enabled|disabled>
21 Enables or disables pango markup for status lines. This has no
22 effect on status lines using the i3bar JSON protocol.
23 id <bar_id>
25 Sets the ID of the bar.
26 position <top|bottom>
28 Sets position of the bar. Default is bottom.
29 output <output>
31 Restrict the bar to a certain output, can be specified multiple
32 times. If the output command is omitted, the bar will be displayed
33 on all outputs.
34 swaybar_command <command>
36 Executes custom bar command, default is swaybar.
37 font <font>
39 Specifies the font to be used in the bar.
40 separator_symbol <symbol>
42 Specifies the separator symbol to separate blocks on the bar.
43 wrap_scroll <yes|no>
45 Enables or disables wrapping when scrolling through workspaces with
46 the scroll wheel. Default is no.
47 workspace_buttons <yes|no>
49 Enables or disables workspace buttons on the bar. Default is yes.
50 strip_workspace_numbers <yes|no>
52 If set to yes, then workspace numbers will be omitted from the
53 workspace button and only the custom name will be shown. Default is
54 no.
55 binding_mode_indicator <yes|no>
57 Enable or disable binding mode indicator. Default is yes.
58 height <height>
60 Sets the height of the bar. Default height will match the font
61 size.
62
64 Swaybar provides a system tray where programs such as NetworkManager,
65 VLC, Pidgin, etc. can place little icons. The following commands
66 configure interaction with the tray or individual icons. The button
67 argument in all following commands is a Linux input event code as
68 defined in linux/input-event-codes.h. This is because wayland defines
69 button codes in this manner.
70 activate_button <button>
72 Sets the button to be used for the activate (primary click) tray
73 item event. The default is BTN_LEFT (0x110).
74 context_button <button>
76 Sets the button to be used for the context menu (right click) tray
77 item event. The default is BTN_RIGHT (0x111).
78 secondary_button <button>
80 Sets the button to be used for the secondary (middle click) tray
81 item event. The default is BTN_MIDDLE (0x112).
82 tray_output none|all|<name>
84 Sets the output that the tray will appear on or none. Unlike i3bar,
85 swaybar should be able to show icons on any number of bars and
86 outputs without races. Because of this, the default value for this
87 is all.
88 tray_padding <px> [px]
90 Sets the pixel padding of the system tray. This padding will
91 surround the tray on all sides and between each item. The default
92 value for px is 2.
93 icon_theme <name>
95 Sets the icon theme that sway will look for item icons in. This
96 option has no default value, because sway will always default to
97 the fallback theme, hicolor.
98
100 Colors are defined within a colors { } block inside a bar { } block.
101 Colors must be defined in hex. i.e. #rrggbb or #rrggbbaa when including
102 the alpha channel.
103 background <color>
105 Background color of the bar.
106 statusline <color>
108 Text color to be used for the statusline.
109 separator <color>
111 Text color to be used for the separator.
112 focused_background <color>
114 Background color of the bar on the currently focused monitor
115 output. If not used, the color will be taken from background.
116 focused_statusline <color>
118 Text color to be used for the statusline on the currently focused
119 monitor output. If not used, the color will be taken from
120 statusline.
121 focused_separator <color>
123 Text color to be used for the separator on the currently focused
124 monitor output. If not used, the color will be taken from
125 separator.
126 focused_workspace <border> <background> <text>
128 Border, background and text color for a workspace button when the
129 workspace has focus.
130 active_workspace <border> <background> <text>
132 Border, background and text color for a workspace button when the
133 workspace is active (visible) on some output, but the focus is on
134 another one. You can only tell this apart from the focused
135 workspace when you are using multiple monitors.
136 inactive_workspace <border> <background> <text>
138 Border, background and text color for a workspace button when the
139 workspace does not have focus and is not active (visible) on any
140 output. This will be the case for most workspaces.
141 urgent_workspace <border> <background> <text>
143 Border, background and text color for a workspace button when the
144 workspace contains a window with the urgency hint set.
145 binding_mode <border> <background> <text>
147 Border, background and text color for the binding mode indicator.
148 If not used, the colors will be taken from urgent_workspace.
149
151 sway(5)
152 07/26/2018 SWAY-BAR(5)