1VIM(1) General Commands Manual VIM(1)
2
6 vim - Vi IMproved, a programmer's text editor
7
9 vim [options] [file ..]
10 vim [options] -
11 vim [options] -t tag
12 vim [options] -q [errorfile]
13 ex gex
15 view
16 gvim gview vimx evim eview
17 rvim rview rgvim rgview
18
20 Vim is a text editor that is upwards compatible to Vi. It can be used
21 to edit all kinds of plain text. It is especially useful for editing
22 programs.
23 There are a lot of enhancements above Vi: multi level undo, multi win‐
25 dows and buffers, syntax highlighting, command line editing, filename
26 completion, on-line help, visual selection, etc.. See ":help
27 vi_diff.txt" for a summary of the differences between Vim and Vi.
28 While running Vim a lot of help can be obtained from the on-line help
30 system, with the ":help" command. See the ON-LINE HELP section below.
31 Most often Vim is started to edit a single file with the command
33 vim file
35 More generally Vim is started with:
37 vim [options] [filelist]
39 If the filelist is missing, the editor will start with an empty buffer.
41 Otherwise exactly one out of the following four may be used to choose
42 one or more files to be edited.
43 file .. A list of filenames. The first one will be the current
45 file and read into the buffer. The cursor will be posi‐
46 tioned on the first line of the buffer. You can get to the
47 other files with the ":next" command. To edit a file that
48 starts with a dash, precede the filelist with "--".
49 - The file to edit is read from stdin. Commands are read
51 from stderr, which should be a TTY.
52 -t {tag} The file to edit and the initial cursor position depends on
54 a "tag", a sort of goto label. {tag} is looked up in the
55 tags file, the associated file becomes the current file and
56 the associated command is executed. Mostly this is used
57 for C programs, in which case {tag} could be a function
58 name. The effect is that the file containing that function
59 becomes the current file and the cursor is positioned on
60 the start of the function. See ":help tag-commands".
61 -q [errorfile]
63 Start in quickFix mode. The file [errorfile] is read and
64 the first error is displayed. If [errorfile] is omitted,
65 the filename is obtained from the 'errorfile' option
66 (defaults to "AztecC.Err" for the Amiga, "errors.err" on
67 other systems). Further errors can be jumped to with the
68 ":cn" command. See ":help quickfix".
69 Vim behaves differently, depending on the name of the command (the exe‐
71 cutable may still be the same file).
72 vim The "normal" way, everything is default.
74 ex Start in Ex mode. Go to Normal mode with the ":vi" command.
76 Can also be done with the "-e" argument.
77 view Start in read-only mode. You will be protected from writing
79 the files. Can also be done with the "-R" argument.
80 gvim gview
82 The GUI version. Starts a new window.
83 gex Starts a new gvim window in Ex mode. Can also be done with
85 the "-e" argument to gvim
86 vimx Starts gvim in "Vi" mode similar to "vim", but with addi‐
88 tional features like xterm clipboard support
89 evim eview
91 The GUI version in easy mode. Starts a new window. Can also
92 be done with the "-y" argument.
93 rvim rview rgvim rgview
95 Like the above, but with restrictions. It will not be possi‐
96 ble to start shell commands, or suspend Vim. Can also be
97 done with the "-Z" argument.
98
100 The options may be given in any order, before or after filenames.
101 Options without an argument can be combined after a single dash.
102 +[num] For the first file the cursor will be positioned on line
104 "num". If "num" is missing, the cursor will be positioned
105 on the last line.
106 +/{pat} For the first file the cursor will be positioned in the
108 line with the first occurrence of {pat}. See ":help
109 search-pattern" for the available search patterns.
110 +{command}
112 -c {command}
114 {command} will be executed after the first file has been
115 read. {command} is interpreted as an Ex command. If the
116 {command} contains spaces it must be enclosed in double
117 quotes (this depends on the shell that is used). Example:
118 Vim "+set si" main.c
119 Note: You can use up to 10 "+" or "-c" commands.
120 -S {file} {file} will be sourced after the first file has been read.
122 This is equivalent to -c "source {file}". {file} cannot
123 start with '-'. If {file} is omitted "Session.vim" is used
124 (only works when -S is the last argument).
125 --cmd {command}
127 Like using "-c", but the command is executed just before
128 processing any vimrc file. You can use up to 10 of these
129 commands, independently from "-c" commands.
130 -A If Vim has been compiled with ARABIC support for editing
132 right-to-left oriented files and Arabic keyboard mapping,
133 this option starts Vim in Arabic mode, i.e. 'arabic' is
134 set. Otherwise an error message is given and Vim aborts.
135 -b Binary mode. A few options will be set that makes it pos‐
137 sible to edit a binary or executable file.
138 -C Compatible. Set the 'compatible' option. This will make
140 Vim behave mostly like Vi, even though a .vimrc file
141 exists.
142 -d Start in diff mode. There should be two, three or four
144 file name arguments. Vim will open all the files and show
145 differences between them. Works like vimdiff(1).
146 -d {device} Open {device} for use as a terminal. Only on the Amiga.
148 Example: "-d con:20/30/600/150".
149 -D Debugging. Go to debugging mode when executing the first
151 command from a script.
152 -e Start Vim in Ex mode, just like the executable was called
154 "ex".
155 -E Start Vim in improved Ex mode, just like the executable was
157 called "exim".
158 -f Foreground. For the GUI version, Vim will not fork and
160 detach from the shell it was started in. On the Amiga, Vim
161 is not restarted to open a new window. This option should
162 be used when Vim is executed by a program that will wait
163 for the edit session to finish (e.g. mail). On the Amiga
164 the ":sh" and ":!" commands will not work.
165 --nofork Foreground. For the GUI version, Vim will not fork and
167 detach from the shell it was started in.
168 -F If Vim has been compiled with FKMAP support for editing
170 right-to-left oriented files and Farsi keyboard mapping,
171 this option starts Vim in Farsi mode, i.e. 'fkmap' and
172 'rightleft' are set. Otherwise an error message is given
173 and Vim aborts.
174 -g If Vim has been compiled with GUI support, this option
176 enables the GUI. If no GUI support was compiled in, an
177 error message is given and Vim aborts.
178 -h Give a bit of help about the command line arguments and
180 options. After this Vim exits.
181 -H If Vim has been compiled with RIGHTLEFT support for editing
183 right-to-left oriented files and Hebrew keyboard mapping,
184 this option starts Vim in Hebrew mode, i.e. 'hkmap' and
185 'rightleft' are set. Otherwise an error message is given
186 and Vim aborts.
187 -i {viminfo}
189 When using the viminfo file is enabled, this option sets
190 the filename to use, instead of the default "~/.viminfo".
191 This can also be used to skip the use of the .viminfo file,
192 by giving the name "NONE".
193 -L Same as -r.
195 -l Lisp mode. Sets the 'lisp' and 'showmatch' options on.
197 -m Modifying files is disabled. Resets the 'write' option.
199 You can still modify the buffer, but writing a file is not
200 possible.
201 -M Modifications not allowed. The 'modifiable' and 'write'
203 options will be unset, so that changes are not allowed and
204 files can not be written. Note that these options can be
205 set to enable making modifications.
206 -N No-compatible mode. Reset the 'compatible' option. This
208 will make Vim behave a bit better, but less Vi compatible,
209 even though a .vimrc file does not exist.
210 -n No swap file will be used. Recovery after a crash will be
212 impossible. Handy if you want to edit a file on a very
213 slow medium (e.g. floppy). Can also be done with ":set
214 uc=0". Can be undone with ":set uc=200".
215 -nb Become an editor server for NetBeans. See the docs for
217 details.
218 -o[N] Open N windows stacked. When N is omitted, open one window
220 for each file.
221 -O[N] Open N windows side by side. When N is omitted, open one
223 window for each file.
224 -p[N] Open N tab pages. When N is omitted, open one tab page for
226 each file.
227 -R Read-only mode. The 'readonly' option will be set. You
229 can still edit the buffer, but will be prevented from acci‐
230 dentally overwriting a file. If you do want to overwrite a
231 file, add an exclamation mark to the Ex command, as in
232 ":w!". The -R option also implies the -n option (see
233 above). The 'readonly' option can be reset with ":set
234 noro". See ":help 'readonly'".
235 -r List swap files, with information about using them for
237 recovery.
238 -r {file} Recovery mode. The swap file is used to recover a crashed
240 editing session. The swap file is a file with the same
241 filename as the text file with ".swp" appended. See ":help
242 recovery".
243 -s Silent mode. Only when started as "Ex" or when the "-e"
245 option was given before the "-s" option.
246 -s {scriptin}
248 The script file {scriptin} is read. The characters in the
249 file are interpreted as if you had typed them. The same
250 can be done with the command ":source! {scriptin}". If the
251 end of the file is reached before the editor exits, further
252 characters are read from the keyboard.
253 -T {terminal}
255 Tells Vim the name of the terminal you are using. Only
256 required when the automatic way doesn't work. Should be a
257 terminal known to Vim (builtin) or defined in the termcap
258 or terminfo file.
259 -u {vimrc} Use the commands in the file {vimrc} for initializations.
261 All the other initializations are skipped. Use this to
262 edit a special kind of files. It can also be used to skip
263 all initializations by giving the name "NONE". See ":help
264 initialization" within vim for more details.
265 -U {gvimrc} Use the commands in the file {gvimrc} for GUI initializa‐
267 tions. All the other GUI initializations are skipped. It
268 can also be used to skip all GUI initializations by giving
269 the name "NONE". See ":help gui-init" within vim for more
270 details.
271 -V[N] Verbose. Give messages about which files are sourced and
273 for reading and writing a viminfo file. The optional num‐
274 ber N is the value for 'verbose'. Default is 10.
275 -v Start Vim in Vi mode, just like the executable was called
277 "vi". This only has effect when the executable is called
278 "ex".
279 -w {scriptout}
281 All the characters that you type are recorded in the file
282 {scriptout}, until you exit Vim. This is useful if you
283 want to create a script file to be used with "vim -s" or
284 ":source!". If the {scriptout} file exists, characters are
285 appended.
286 -W {scriptout}
288 Like -w, but an existing file is overwritten.
289 -x Use encryption when writing files. Will prompt for a crypt
291 key.
292 -X Don't connect to the X server. Shortens startup time in a
294 terminal, but the window title and clipboard will not be
295 used.
296 -y Start Vim in easy mode, just like the executable was called
298 "evim" or "eview". Makes Vim behave like a click-and-type
299 editor.
300 -Z Restricted mode. Works like the executable starts with
302 "r".
303 -- Denotes the end of the options. Arguments after this will
305 be handled as a file name. This can be used to edit a
306 filename that starts with a '-'.
307 --echo-wid GTK GUI only: Echo the Window ID on stdout.
309 --help Give a help message and exit, just like "-h".
311 --literal Take file name arguments literally, do not expand wild‐
313 cards. This has no effect on Unix where the shell expands
314 wildcards.
315 --noplugin Skip loading plugins. Implied by -u NONE.
317 --remote Connect to a Vim server and make it edit the files given in
319 the rest of the arguments. If no server is found a warning
320 is given and the files are edited in the current Vim.
321 --remote-expr {expr}
323 Connect to a Vim server, evaluate {expr} in it and print
324 the result on stdout.
325 --remote-send {keys}
327 Connect to a Vim server and send {keys} to it.
328 --remote-silent
330 As --remote, but without the warning when no server is
331 found.
332 --remote-wait
334 As --remote, but Vim does not exit until the files have
335 been edited.
336 --remote-wait-silent
338 As --remote-wait, but without the warning when no server is
339 found.
340 --remote-tab[-wait][-silent]
342 As --remote but use tab page per file
343 --role Set a unique role to identify the main window
345 --serverlist
347 List the names of all Vim servers that can be found.
348 --servername {name}
350 Use {name} as the server name. Used for the current Vim,
351 unless used with a --remote argument, then it's the name of
352 the server to connect to.
353 --socketid {id}
355 GTK GUI only: Use the GtkPlug mechanism to run gvim in
356 another window.
357 --version Print version information and exit.
359
361 Type ":help" in Vim to get started. Type ":help subject" to get help
362 on a specific subject. For example: ":help ZZ" to get help for the
363 "ZZ" command. Use <Tab> and CTRL-D to complete subjects (":help cmd‐
364 line-completion"). Tags are present to jump from one place to another
365 (sort of hypertext links, see ":help"). All documentation files can be
366 viewed in this way, for example ":help syntax.txt".
367
369 /usr/share/vim/vim81/doc/*.txt
370 The Vim documentation files. Use ":help doc-file-list"
371 to get the complete list.
372 /usr/share/vim/vim81/doc/tags
374 The tags file used for finding information in the docu‐
375 mentation files.
376 /usr/share/vim/vim81/syntax/syntax.vim
378 System wide syntax initializations.
379 /usr/share/vim/vim81/syntax/*.vim
381 Syntax files for various languages.
382 /etc/vimrc System wide Vim initializations.
384 ~/.vimrc Your personal Vim initializations.
386 /etc/gvimrc System wide gvim initializations.
388 ~/.gvimrc Your personal gvim initializations.
390 /usr/share/vim/vim81/optwin.vim
392 Script used for the ":options" command, a nice way to
393 view and set options.
394 /usr/share/vim/vim81/menu.vim
396 System wide menu initializations for gvim.
397 /usr/share/vim/vim81/bugreport.vim
399 Script to generate a bug report. See ":help bugs".
400 /usr/share/vim/vim81/filetype.vim
402 Script to detect the type of a file by its name. See
403 ":help 'filetype'".
404 /usr/share/vim/vim81/scripts.vim
406 Script to detect the type of a file by its contents.
407 See ":help 'filetype'".
408 /usr/share/vim/vim81/print/*.ps
410 Files used for PostScript printing.
411 For recent info read the VIM home page:
413 <URL:http://www.vim.org/>
414
416 vimtutor(1)
417
419 Most of Vim was made by Bram Moolenaar, with a lot of help from others.
420 See ":help credits" in Vim.
421 Vim is based on Stevie, worked on by: Tim Thompson, Tony Andrews and
422 G.R. (Fred) Walter. Although hardly any of the original code remains.
423
425 Probably. See ":help todo" for a list of known problems.
426 Note that a number of things that may be regarded as bugs by some, are
428 in fact caused by a too-faithful reproduction of Vi's behaviour. And
429 if you think other things are bugs "because Vi does it differently",
430 you should take a closer look at the vi_diff.txt file (or type :help
431 vi_diff.txt when in Vim). Also have a look at the 'compatible' and
432 'cpoptions' options.
433 2006 Apr 11 VIM(1)