1xrdp.ini(5) xrdp.ini(5)
2
6 xrdp.ini - Configuration file for xrdp(8)
7
10 This is the man page for xrdp.ini, xrdp(8) configuration file. It is
11 composed by a number of sections, each one composed by a section name,
12 enclosed by square brackets, followed by a list of <parameter>=<value>
13 lines.
14 xrdp.ini supports the following sections:
16 [Globals] - sets some global configuration settings for xrdp(8).
19 [Logging] - logging subsystem parameters
22 [Channels] - channel subsystem parameters
25 All options and values (except for file names and paths) are case
28 insensitive, and are described in detail below.
29
32 The options to be specified in the [Globals] section are the following:
33 address=ip address
36 Specify xrdp listening address. If not specified, defaults to
37 0.0.0.0 (all interfaces).
38 autorun=session_name
41 Section name for automatic login. If set and the client supplies
42 valid username and password, the user will be logged in automat‐
43 ically using the connection specified by session_name.
44 If session_name is empty, the LOGIN DOMAIN from the client with
46 be used to select the section. If no domain name is supplied,
47 the first suitable section will be used for automatic login.
48 bitmap_cache=[true|false]
51 If set to 1, true or yes this option enables bitmap caching in
52 xrdp(8).
53 bitmap_compression=[true|false]
56 If set to 1, true or yes this option enables bitmap compression
57 in xrdp(8).
58 bulk_compression=[true|false]
61 If set to 1, true or yes this option enables compression of bulk
62 data in xrdp(8).
63 certificate=/path/to/certificate
66 key_file=/path/to/private_key
68 Set location of TLS certificate and private key. They must be
69 written in PEM format. If not specified, defaults to
70 /etc/xrdp/cert.pem, /etc/xrdp/key.pem.
71 This parameter is effective only if security_layer is set to tls
73 or negotiate.
74 channel_code=[true|false]
77 If set to 0, false or no this option disables all channels
78 xrdp(8). See section CHANNELS below for more fine grained
79 options.
80 crypt_level=[low|medium|high|fips]
83 Regulate encryption level of Standard RDP Security. This param‐
84 eter is effective only if security_layer is set to rdp or nego‐
85 tiate.
86 Encryption in Standard RDP Security is controlled by two set‐
88 tings: Encryption Level and Encryption Method. The only sup‐
89 ported Encryption Method are 40BIT_ENCRYPTION and 128BIT_ENCRYP‐
90 TION. 56BIT_ENCRYPTION is not supported. This option controls
91 the Encryption Level:
92 low All data sent from the client to the server is protected
94 by encryption based on the maximum key strength sup‐
95 ported by the client. This is the only level that the
96 traffic sent by the server to client is not encrypted.
97 medium All data sent between the client and the server is pro‐
99 tected by encryption based on the maximum key strength
100 supported by the client (client compatible).
101 high All data sent between the client and the server is pro‐
103 tected by encryption based on the server's maximum key
104 strength (sever compatible).
105 fips All data sent between the client and server is protected
107 using Federal Information Processing Standard 140-1 val‐
108 idated encryption methods. This level is required for
109 Windows clients (mstsc.exe) if the client's group policy
110 enforces FIPS-compliance mode.
111 fork=[true|false]
114 If set to 1, true or yes for each incoming connection xrdp(8)
115 forks a sub-process instead of using threads.
116 hidelogwindow=[true|false]
119 If set to 1, true or yes, xrdp will not show a window for log
120 messages. If not specified, defaults to false.
121 max_bpp=[8|15|16|24|32]
124 Limit the color depth by specifying the maximum number of bits
125 per pixel. If not specified or set to 0, unlimited.
126 pamerrortxt=error_text
129 Specify text passed to PAM when authentication failed. The maxi‐
130 mum length is 256.
131 port=port
134 Specify TCP port to listen on for incoming connections. The
135 default for RDP is 3389.
136 require_credentials=[true|false]
139 If set to 1, true or yes, xrdp requires clients to include user‐
140 name and password initial connection phase. In other words, xrdp
141 doesn't allow clients to show login screen if set to true. If
142 not specified, defaults to false.
143 security_layer=[tls|rdp|negotiate]
146 Regulate security methods. If not specified, defaults to negoti‐
147 ate.
148 tls Enhanced RDP Security is used. All security operations
150 (encryption, decryption, data integrity verification,
151 and server authentication) are implemented by TLS.
152 rdp Standard RDP Security, which is not safe from man-in-
155 the-middle attack, is used. The encryption level of
156 Standard RDP Security is controlled by crypt_level.
157 negotiate
160 Negotiate these security methods with clients.
161 ssl_protocols=[SSLv3] [TLSv1] [TLSv1.1] [TLSv1.2] [TLSv1.3]
164 Enables the specified SSL/TLS protocols. Each value should be
165 separated by comma. SSLv2 is always disabled. At least one pro‐
166 tocol should be given to accept TLS connections. This parameter
167 is effective only if security_layer is set to tls or negotiate.
168 tcp_keepalive=[true|false]
171 Regulate if the listening socket uses socket option
172 SO_KEEPALIVE. If set to 1, true or yes and the network connec‐
173 tion disappears without closing messages, the connection will be
174 closed.
175 tcp_nodelay=[true|false]
178 Regulate if the listening socket uses socket option TCP_NODELAY.
179 If set to 1, true or yes, no buffering will be performed in the
180 TCP stack.
181 tcp_send_buffer_bytes=buffer_size
184 tcp_recv_buffer_bytes=buffer_size
186 Specify send/recv buffer sizes in bytes. The default value
187 depends on operating system.
188 tls_ciphers=cipher_suite
191 Specifies TLS cipher suite. The format of this parameter is
192 equivalent to which openssl(1) ciphers subcommand accepts.
193 (ex. $ openssl ciphers 'HIGH:!ADH:!SHA1')
195 This parameter is effective only if security_layer is set to tls
197 or negotiate.
198 use_fastpath=[input|output|both|none]
201 If not specified, defaults to none.
202 black=000000
205 grey=c0c0c0
207 dark_grey=808080
209 blue=0000ff
211 dark_blue=00007f
213 white=ffffff
215 red=ff0000
217 green=00ff00
219 background=000000
221 These options override the colors used internally by xrdp(8) to
222 draw the login and log windows. Colors are defined using a
223 hexadecimal (hex) notation for the combination of Red, Green,
224 and Blue color values (RGB). The lowest value that can be given
225 to one of the light sources is 0 (hex 00). The highest value is
226 255 (hex FF).
227
230 The following parameters can be used in the [Logging] section:
231 LogFile=/var/log/xrdp.log
234 This options contains the path to logfile. It can be either
235 absolute or relative.
236 LogLevel=level
239 This option can have one of the following values:
240 CORE or 0 - Log only core messages. these messages are _always_
242 logged, regardless the logging level selected.
243 ERROR or 1 - Log only error messages
245 WARNING, WARN or 2 - Logs warnings and error messages
247 INFO or 3 - Logs errors, warnings and informational messages
249 DEBUG or 4 - Log everything. If sesman is compiled in debug
251 mode, this options will output many more low-level message, use‐
252 ful for developers
253 EnableSyslog=[true|false]
256 If set to 1, true or yes this option enables logging to syslog.
257 Otherwise syslog is disabled.
258 SyslogLevel=level
261 This option sets the logging level for syslog. It can have the
262 same values of LogLevel. If SyslogLevel is greater than
263 LogLevel, its value is lowered to that of LogLevel.
264
267 The Remote Desktop Protocol supports several channels, which are used
268 to transfer additional data like sound, clipboard data and others.
269 Channel names not listed here will be blocked by xrdp. Not all chan‐
270 nels are supported in all cases, so setting a value to true is a pre‐
271 requisite, but does not force its use.
272 Channels can also be enabled or disabled on a per connection basis by
273 prefixing each setting with channel. in the channel section.
274 rdpdr=[true|false]
277 If set to 1, true or yes using the RDP channel for device redi‐
278 rection is allowed.
279 rdpsnd=[true|false]
282 If set to 1, true or yes using the RDP channel for sound is
283 allowed.
284 drdynvc=[true|false]
287 If set to 1, true or yes using the RDP channel to initiate addi‐
288 tional dynamic virtual channels is allowed.
289 cliprdr=[true|false]
292 If set to 1, true or yes using the RDP channel for clipboard re‐
293 direction is allowed.
294 rail=[true|false]
297 If set to 1, true or yes using the RDP channel for remote appli‐
298 cations integrated locally (RAIL) is allowed.
299 xrdpvr=[true|false]
302 If set to 1, true or yes using the RDP channel for XRDP Video
303 streaming is allowed.
304
307 A connection section is made of a section name, enclosed in square
308 brackets, and the following entries:
309 name=<session name>
312 The name displayed in xrdp(8) login window's combo box.
313 lib=../vnc/libvnc.so
316 Sets the library to be used with this connection.
317 username=<username>|{base64}<base64-encoded-username>|ask
320 Specifies the username used for authenticating in the connec‐
321 tion. If set to ask, user name should be provided in the login
322 window.
323 If the username includes comment out symbols such as '#', or
325 ';', the username can be provided in base64 form prefixing
326 "{base64}".
327 password=<password>|{base64}<base64-encoded-password>|ask
330 Specifies the password used for authenticating in the connec‐
331 tion. If set to ask, password should be provided in the login
332 window.
333 This parameter can be provided in base64 form as well as user‐
335 name. See also examples below.
336 ip=127.0.0.1
339 Specifies the ip address of the host to connect to.
340 port=<number>|-1
343 Specifies the port number to connect to. If set to -1, the
344 default port for the specified library is used.
345 xserverbpp=<number>
348 Specifies color depth of the backend X server. The default is
349 the color depth of the client. Only Xvnc and X11rdp use that
350 setting. Xorg runs at 24 bpp.
351 code=<number>|0
354 Specifies the session type. The default, 0, is Xvnc, 10 is
355 X11rdp, and 20 is Xorg with xorgxrdp modules.
356
359 This is an example xrdp.ini:
360 [Globals]
362 bitmap_cache=true
363 bitmap_compression=true
364 [Xorg]
366 name=Xorg
367 lib=libxup.so
368 username=ask
369 password=ask
370 ip=127.0.0.1
371 port=-1
372 code=20
373 [vnc-any]
375 name=vnc-any
376 lib=libvnc.so
377 ip=ask
378 port=ask5900
379 username=na
380 password={base64}cGFzc3dvcmQhCg==
381
384 /etc/xrdp/xrdp.ini
385
388 xrdp(8), sesman(8), sesrun(8), sesman.ini(5)
389 for more info on xrdp see http://www.xrdp.org/
391xrdp team 0.9.10 xrdp.ini(5)