1cpuplug_selinux(8) SELinux Policy cpuplug cpuplug_selinux(8)
2
6 cpuplug_selinux - Security Enhanced Linux Policy for the cpuplug pro‐
7 cesses
8
10 Security-Enhanced Linux secures the cpuplug processes via flexible
11 mandatory access control.
12 The cpuplug processes execute with the cpuplug_t SELinux type. You can
14 check if you have these processes running by executing the ps command
15 with the -Z qualifier.
16 For example:
18 ps -eZ | grep cpuplug_t
20
24 The cpuplug_t SELinux type can be entered via the cpuplug_exec_t file
25 type.
26 The default entrypoint paths for the cpuplug_t domain are the follow‐
28 ing:
29 /usr/sbin/cpuplugd
31
33 SELinux defines process types (domains) for each process running on the
34 system
35 You can see the context of a process using the -Z option to ps
37 Policy governs the access confined processes have to files. SELinux
39 cpuplug policy is very flexible allowing users to setup their cpuplug
40 processes in as secure a method as possible.
41 The following process types are defined for cpuplug:
43 cpuplug_t
45 Note: semanage permissive -a cpuplug_t can be used to make the process
47 type cpuplug_t permissive. SELinux does not deny access to permissive
48 process types, but the AVC (SELinux denials) messages are still gener‐
49 ated.
50
53 SELinux policy is customizable based on least access required. cpuplug
54 policy is extremely flexible and has several booleans that allow you to
55 manipulate the policy and run cpuplug with the tightest access possi‐
56 ble.
57 If you want to allow all domains to execute in fips_mode, you must turn
61 on the fips_mode boolean. Enabled by default.
62 setsebool -P fips_mode 1
64
68 The SELinux process type cpuplug_t can manage files labeled with the
69 following file types. The paths listed are the default paths for these
70 file types. Note the processes UID still need to have DAC permissions.
71 cluster_conf_t
73 /etc/cluster(/.*)?
75 cluster_var_lib_t
77 /var/lib/pcsd(/.*)?
79 /var/lib/cluster(/.*)?
80 /var/lib/openais(/.*)?
81 /var/lib/pengine(/.*)?
82 /var/lib/corosync(/.*)?
83 /usr/lib/heartbeat(/.*)?
84 /var/lib/heartbeat(/.*)?
85 /var/lib/pacemaker(/.*)?
86 cluster_var_run_t
88 /var/run/crm(/.*)?
90 /var/run/cman_.*
91 /var/run/rsctmp(/.*)?
92 /var/run/aisexec.*
93 /var/run/heartbeat(/.*)?
94 /var/run/corosync-qnetd(/.*)?
95 /var/run/corosync-qdevice(/.*)?
96 /var/run/corosync.pid
97 /var/run/cpglockd.pid
98 /var/run/rgmanager.pid
99 /var/run/cluster/rgmanager.sk
100 cpuplug_lock_t
102 cpuplug_var_run_t
105 root_t
108 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
110 /
111 /initrd
112 sysfs_t
114 /sys(/.*)?
116
119 SELinux requires files to have an extended attribute to define the file
120 type.
121 You can see the context of a file using the -Z option to ls
123 Policy governs the access confined processes have to these files.
125 SELinux cpuplug policy is very flexible allowing users to setup their
126 cpuplug processes in as secure a method as possible.
127 STANDARD FILE CONTEXT
129 SELinux defines the file context types for the cpuplug, if you wanted
131 to store files with these types in a diffent paths, you need to execute
132 the semanage command to sepecify alternate labeling and then use
133 restorecon to put the labels on disk.
134 semanage fcontext -a -t cpuplug_var_run_t '/srv/mycpuplug_con‐
136 tent(/.*)?'
137 restorecon -R -v /srv/mycpuplug_content
138 Note: SELinux often uses regular expressions to specify labels that
140 match multiple files.
141 The following file types are defined for cpuplug:
143 cpuplug_exec_t
147 - Set files with the cpuplug_exec_t type, if you want to transition an
149 executable to the cpuplug_t domain.
150 cpuplug_initrc_exec_t
154 - Set files with the cpuplug_initrc_exec_t type, if you want to transi‐
156 tion an executable to the cpuplug_initrc_t domain.
157 cpuplug_lock_t
161 - Set files with the cpuplug_lock_t type, if you want to treat the
163 files as cpuplug lock data, stored under the /var/lock directory
164 cpuplug_var_run_t
168 - Set files with the cpuplug_var_run_t type, if you want to store the
170 cpuplug files under the /run or /var/run directory.
171 Note: File context can be temporarily modified with the chcon command.
175 If you want to permanently change the file context you need to use the
176 semanage fcontext command. This will modify the SELinux labeling data‐
177 base. You will need to use restorecon to apply the labels.
178
181 semanage fcontext can also be used to manipulate default file context
182 mappings.
183 semanage permissive can also be used to manipulate whether or not a
185 process type is permissive.
186 semanage module can also be used to enable/disable/install/remove pol‐
188 icy modules.
189 semanage boolean can also be used to manipulate the booleans
191 system-config-selinux is a GUI tool available to customize SELinux pol‐
194 icy settings.
195
198 This manual page was auto-generated using sepolicy manpage .
199
202 selinux(8), cpuplug(8), semanage(8), restorecon(8), chcon(1), sepol‐
203 icy(8), setsebool(8)
204cpuplug 19-06-18 cpuplug_selinux(8)