hypervvssd_selinux(8)

1hypervvssd_selinux(8)      SELinux Policy hypervvssd     hypervvssd_selinux(8)
2
3
4

NAME

6       hypervvssd_selinux  - Security Enhanced Linux Policy for the hypervvssd
7       processes
8

DESCRIPTION

10       Security-Enhanced Linux secures the hypervvssd processes  via  flexible
11       mandatory access control.
12
13       The  hypervvssd  processes  execute with the hypervvssd_t SELinux type.
14       You can check if you have these processes running by executing  the  ps
15       command with the -Z qualifier.
16
17       For example:
18
19       ps -eZ | grep hypervvssd_t
20
21
22

ENTRYPOINTS

24       The  hypervvssd_t SELinux type can be entered via the hypervvssd_exec_t
25       file type.
26
27       The default entrypoint paths for the hypervvssd_t domain are  the  fol‐
28       lowing:
29
30       /usr/sbin/hypervvssd
31

PROCESS TYPES

33       SELinux defines process types (domains) for each process running on the
34       system
35
36       You can see the context of a process using the -Z option to ps
37
38       Policy governs the access confined processes have  to  files.   SELinux
39       hypervvssd policy is very flexible allowing users to setup their hyper‐
40       vvssd processes in as secure a method as possible.
41
42       The following process types are defined for hypervvssd:
43
44       hypervvssd_t
45
46       Note: semanage permissive -a hypervvssd_t  can  be  used  to  make  the
47       process  type  hypervvssd_t permissive. SELinux does not deny access to
48       permissive process types, but the AVC (SELinux  denials)  messages  are
49       still generated.
50
51

BOOLEANS

53       SELinux  policy is customizable based on least access required.  hyper‐
54       vvssd policy is extremely flexible and has several booleans that  allow
55       you  to  manipulate  the  policy  and  run hypervvssd with the tightest
56       access possible.
57
58
59
60       If you want to allow all domains to execute in fips_mode, you must turn
61       on the fips_mode boolean. Enabled by default.
62
63       setsebool -P fips_mode 1
64
65
66

MANAGED FILES

68       The SELinux process type hypervvssd_t can manage files labeled with the
69       following file types.  The paths listed are the default paths for these
70       file types.  Note the processes UID still need to have DAC permissions.
71
72       cluster_conf_t
73
74            /etc/cluster(/.*)?
75
76       cluster_var_lib_t
77
78            /var/lib/pcsd(/.*)?
79            /var/lib/cluster(/.*)?
80            /var/lib/openais(/.*)?
81            /var/lib/pengine(/.*)?
82            /var/lib/corosync(/.*)?
83            /usr/lib/heartbeat(/.*)?
84            /var/lib/heartbeat(/.*)?
85            /var/lib/pacemaker(/.*)?
86
87       cluster_var_run_t
88
89            /var/run/crm(/.*)?
90            /var/run/cman_.*
91            /var/run/rsctmp(/.*)?
92            /var/run/aisexec.*
93            /var/run/heartbeat(/.*)?
94            /var/run/corosync-qnetd(/.*)?
95            /var/run/corosync-qdevice(/.*)?
96            /var/run/corosync.pid
97            /var/run/cpglockd.pid
98            /var/run/rgmanager.pid
99            /var/run/cluster/rgmanager.sk
100
101       root_t
102
103            /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
104            /
105            /initrd
106
107

FILE CONTEXTS

109       SELinux requires files to have an extended attribute to define the file
110       type.
111
112       You can see the context of a file using the -Z option to ls
113
114       Policy governs the access  confined  processes  have  to  these  files.
115       SELinux  hypervvssd  policy  is  very  flexible allowing users to setup
116       their hypervvssd processes in as secure a method as possible.
117
118       STANDARD FILE CONTEXT
119
120       SELinux defines the file context  types  for  the  hypervvssd,  if  you
121       wanted  to store files with these types in a diffent paths, you need to
122       execute the semanage command to sepecify alternate  labeling  and  then
123       use restorecon to put the labels on disk.
124
125       semanage  fcontext -a -t hypervvssd_unit_file_t '/srv/myhypervvssd_con‐
126       tent(/.*)?'
127       restorecon -R -v /srv/myhypervvssd_content
128
129       Note: SELinux often uses regular expressions  to  specify  labels  that
130       match multiple files.
131
132       The following file types are defined for hypervvssd:
133
134
135
136       hypervvssd_exec_t
137
138       -  Set files with the hypervvssd_exec_t type, if you want to transition
139       an executable to the hypervvssd_t domain.
140
141
142
143       hypervvssd_unit_file_t
144
145       - Set files with the hypervvssd_unit_file_t type, if you want to  treat
146       the files as hypervvssd unit content.
147
148
149
150       Note:  File context can be temporarily modified with the chcon command.
151       If you want to permanently change the file context you need to use  the
152       semanage fcontext command.  This will modify the SELinux labeling data‐
153       base.  You will need to use restorecon to apply the labels.
154
155

COMMANDS

157       semanage fcontext can also be used to manipulate default  file  context
158       mappings.
159
160       semanage  permissive  can  also  be used to manipulate whether or not a
161       process type is permissive.
162
163       semanage module can also be used to enable/disable/install/remove  pol‐
164       icy modules.
165
166       semanage boolean can also be used to manipulate the booleans
167
168
169       system-config-selinux is a GUI tool available to customize SELinux pol‐
170       icy settings.
171
172

AUTHOR

174       This manual page was auto-generated using sepolicy manpage .
175
176