1minissdpd_selinux(8) SELinux Policy minissdpd minissdpd_selinux(8)
2
6 minissdpd_selinux - Security Enhanced Linux Policy for the minissdpd
7 processes
8
10 Security-Enhanced Linux secures the minissdpd processes via flexible
11 mandatory access control.
12 The minissdpd processes execute with the minissdpd_t SELinux type. You
14 can check if you have these processes running by executing the ps com‐
15 mand with the -Z qualifier.
16 For example:
18 ps -eZ | grep minissdpd_t
20
24 The minissdpd_t SELinux type can be entered via the minissdpd_exec_t
25 file type.
26 The default entrypoint paths for the minissdpd_t domain are the follow‐
28 ing:
29 /usr/sbin/minissdpd
31
33 SELinux defines process types (domains) for each process running on the
34 system
35 You can see the context of a process using the -Z option to ps
37 Policy governs the access confined processes have to files. SELinux
39 minissdpd policy is very flexible allowing users to setup their miniss‐
40 dpd processes in as secure a method as possible.
41 The following process types are defined for minissdpd:
43 minissdpd_t
45 Note: semanage permissive -a minissdpd_t can be used to make the
47 process type minissdpd_t permissive. SELinux does not deny access to
48 permissive process types, but the AVC (SELinux denials) messages are
49 still generated.
50
53 SELinux policy is customizable based on least access required. miniss‐
54 dpd policy is extremely flexible and has several booleans that allow
55 you to manipulate the policy and run minissdpd with the tightest access
56 possible.
57 If you want to allow all domains to execute in fips_mode, you must turn
61 on the fips_mode boolean. Enabled by default.
62 setsebool -P fips_mode 1
64 If you want to disable kernel module loading, you must turn on the
68 secure_mode_insmod boolean. Enabled by default.
69 setsebool -P secure_mode_insmod 1
71
75 The SELinux process type minissdpd_t can manage files labeled with the
76 following file types. The paths listed are the default paths for these
77 file types. Note the processes UID still need to have DAC permissions.
78 cluster_conf_t
80 /etc/cluster(/.*)?
82 cluster_var_lib_t
84 /var/lib/pcsd(/.*)?
86 /var/lib/cluster(/.*)?
87 /var/lib/openais(/.*)?
88 /var/lib/pengine(/.*)?
89 /var/lib/corosync(/.*)?
90 /usr/lib/heartbeat(/.*)?
91 /var/lib/heartbeat(/.*)?
92 /var/lib/pacemaker(/.*)?
93 cluster_var_run_t
95 /var/run/crm(/.*)?
97 /var/run/cman_.*
98 /var/run/rsctmp(/.*)?
99 /var/run/aisexec.*
100 /var/run/heartbeat(/.*)?
101 /var/run/corosync-qnetd(/.*)?
102 /var/run/corosync-qdevice(/.*)?
103 /var/run/corosync.pid
104 /var/run/cpglockd.pid
105 /var/run/rgmanager.pid
106 /var/run/cluster/rgmanager.sk
107 minissdpd_var_run_t
109 /var/run/minissdpd.pid
111 /var/run/minissdpd.sock
112 root_t
114 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
116 /
117 /initrd
118
121 SELinux requires files to have an extended attribute to define the file
122 type.
123 You can see the context of a file using the -Z option to ls
125 Policy governs the access confined processes have to these files.
127 SELinux minissdpd policy is very flexible allowing users to setup their
128 minissdpd processes in as secure a method as possible.
129 STANDARD FILE CONTEXT
131 SELinux defines the file context types for the minissdpd, if you wanted
133 to store files with these types in a diffent paths, you need to execute
134 the semanage command to sepecify alternate labeling and then use
135 restorecon to put the labels on disk.
136 semanage fcontext -a -t minissdpd_var_run_t '/srv/myminissdpd_con‐
138 tent(/.*)?'
139 restorecon -R -v /srv/myminissdpd_content
140 Note: SELinux often uses regular expressions to specify labels that
142 match multiple files.
143 The following file types are defined for minissdpd:
145 minissdpd_conf_t
149 - Set files with the minissdpd_conf_t type, if you want to treat the
151 files as minissdpd configuration data, usually stored under the /etc
152 directory.
153 minissdpd_exec_t
157 - Set files with the minissdpd_exec_t type, if you want to transition
159 an executable to the minissdpd_t domain.
160 minissdpd_initrc_exec_t
164 - Set files with the minissdpd_initrc_exec_t type, if you want to tran‐
166 sition an executable to the minissdpd_initrc_t domain.
167 minissdpd_var_run_t
171 - Set files with the minissdpd_var_run_t type, if you want to store the
173 minissdpd files under the /run or /var/run directory.
174 Paths:
177 /var/run/minissdpd.pid, /var/run/minissdpd.sock
178 Note: File context can be temporarily modified with the chcon command.
181 If you want to permanently change the file context you need to use the
182 semanage fcontext command. This will modify the SELinux labeling data‐
183 base. You will need to use restorecon to apply the labels.
184
187 semanage fcontext can also be used to manipulate default file context
188 mappings.
189 semanage permissive can also be used to manipulate whether or not a
191 process type is permissive.
192 semanage module can also be used to enable/disable/install/remove pol‐
194 icy modules.
195 semanage boolean can also be used to manipulate the booleans
197 system-config-selinux is a GUI tool available to customize SELinux pol‐
200 icy settings.
201
204 This manual page was auto-generated using sepolicy manpage .
205
208 selinux(8), minissdpd(8), semanage(8), restorecon(8), chcon(1), sepol‐
209 icy(8), setsebool(8)
210minissdpd 19-06-18 minissdpd_selinux(8)