1openhpid_selinux(8)         SELinux Policy openhpid        openhpid_selinux(8)
2
3
4

NAME

6       openhpid_selinux - Security Enhanced Linux Policy for the openhpid pro‐
7       cesses
8

DESCRIPTION

10       Security-Enhanced Linux secures the  openhpid  processes  via  flexible
11       mandatory access control.
12
13       The  openhpid  processes  execute with the openhpid_t SELinux type. You
14       can check if you have these processes running by executing the ps  com‐
15       mand with the -Z qualifier.
16
17       For example:
18
19       ps -eZ | grep openhpid_t
20
21
22

ENTRYPOINTS

24       The openhpid_t SELinux type can be entered via the openhpid_exec_t file
25       type.
26
27       The default entrypoint paths for the openhpid_t domain are the  follow‐
28       ing:
29
30       /usr/sbin/openhpid
31

PROCESS TYPES

33       SELinux defines process types (domains) for each process running on the
34       system
35
36       You can see the context of a process using the -Z option to ps
37
38       Policy governs the access confined processes have  to  files.   SELinux
39       openhpid policy is very flexible allowing users to setup their openhpid
40       processes in as secure a method as possible.
41
42       The following process types are defined for openhpid:
43
44       openhpid_t
45
46       Note: semanage permissive -a openhpid_t can be used to make the process
47       type  openhpid_t permissive. SELinux does not deny access to permissive
48       process types, but the AVC (SELinux denials) messages are still  gener‐
49       ated.
50
51

BOOLEANS

53       SELinux  policy is customizable based on least access required.  openh‐
54       pid policy is extremely flexible and has several  booleans  that  allow
55       you  to manipulate the policy and run openhpid with the tightest access
56       possible.
57
58
59
60       If you want to allow all domains to execute in fips_mode, you must turn
61       on the fips_mode boolean. Enabled by default.
62
63       setsebool -P fips_mode 1
64
65
66

PORT TYPES

68       SELinux defines port types to represent TCP and UDP ports.
69
70       You  can  see  the  types associated with a port by using the following
71       command:
72
73       semanage port -l
74
75
76       Policy governs the access  confined  processes  have  to  these  ports.
77       SELinux  openhpid policy is very flexible allowing users to setup their
78       openhpid processes in as secure a method as possible.
79
80       The following port types are defined for openhpid:
81
82
83       openhpid_port_t
84
85
86
87       Default Defined Ports:
88                 tcp 4743
89                 udp 4743
90

MANAGED FILES

92       The SELinux process type openhpid_t can manage files labeled  with  the
93       following file types.  The paths listed are the default paths for these
94       file types.  Note the processes UID still need to have DAC permissions.
95
96       cluster_conf_t
97
98            /etc/cluster(/.*)?
99
100       cluster_var_lib_t
101
102            /var/lib/pcsd(/.*)?
103            /var/lib/cluster(/.*)?
104            /var/lib/openais(/.*)?
105            /var/lib/pengine(/.*)?
106            /var/lib/corosync(/.*)?
107            /usr/lib/heartbeat(/.*)?
108            /var/lib/heartbeat(/.*)?
109            /var/lib/pacemaker(/.*)?
110
111       cluster_var_run_t
112
113            /var/run/crm(/.*)?
114            /var/run/cman_.*
115            /var/run/rsctmp(/.*)?
116            /var/run/aisexec.*
117            /var/run/heartbeat(/.*)?
118            /var/run/corosync-qnetd(/.*)?
119            /var/run/corosync-qdevice(/.*)?
120            /var/run/corosync.pid
121            /var/run/cpglockd.pid
122            /var/run/rgmanager.pid
123            /var/run/cluster/rgmanager.sk
124
125       openhpid_log_t
126
127            /var/log/dynsim[0-9]*.log
128
129       openhpid_var_lib_t
130
131            /var/lib/openhpi(/.*)?
132
133       openhpid_var_run_t
134
135            /var/run/openhpid.pid
136
137       root_t
138
139            /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
140            /
141            /initrd
142
143       snmpd_var_lib_t
144
145            /var/agentx(/.*)?
146            /var/net-snmp(/.*)
147            /var/lib/snmp(/.*)?
148            /var/net-snmp(/.*)?
149            /var/lib/net-snmp(/.*)?
150            /var/spool/snmptt(/.*)?
151            /usr/share/snmp/mibs/.index
152
153

FILE CONTEXTS

155       SELinux requires files to have an extended attribute to define the file
156       type.
157
158       You can see the context of a file using the -Z option to ls
159
160       Policy  governs  the  access  confined  processes  have to these files.
161       SELinux openhpid policy is very flexible allowing users to setup  their
162       openhpid processes in as secure a method as possible.
163
164       STANDARD FILE CONTEXT
165
166       SELinux  defines the file context types for the openhpid, if you wanted
167       to store files with these types in a diffent paths, you need to execute
168       the  semanage  command  to  sepecify  alternate  labeling  and then use
169       restorecon to put the labels on disk.
170
171       semanage  fcontext  -a  -t   openhpid_var_run_t   '/srv/myopenhpid_con‐
172       tent(/.*)?'
173       restorecon -R -v /srv/myopenhpid_content
174
175       Note:  SELinux  often  uses  regular expressions to specify labels that
176       match multiple files.
177
178       The following file types are defined for openhpid:
179
180
181
182       openhpid_exec_t
183
184       - Set files with the openhpid_exec_t type, if you want to transition an
185       executable to the openhpid_t domain.
186
187
188
189       openhpid_initrc_exec_t
190
191       -  Set files with the openhpid_initrc_exec_t type, if you want to tran‐
192       sition an executable to the openhpid_initrc_t domain.
193
194
195
196       openhpid_log_t
197
198       - Set files with the openhpid_log_t type, if you want to treat the data
199       as openhpid log data, usually stored under the /var/log directory.
200
201
202
203       openhpid_var_lib_t
204
205       -  Set files with the openhpid_var_lib_t type, if you want to store the
206       openhpid files under the /var/lib directory.
207
208
209
210       openhpid_var_run_t
211
212       - Set files with the openhpid_var_run_t type, if you want to store  the
213       openhpid files under the /run or /var/run directory.
214
215
216
217       Note:  File context can be temporarily modified with the chcon command.
218       If you want to permanently change the file context you need to use  the
219       semanage fcontext command.  This will modify the SELinux labeling data‐
220       base.  You will need to use restorecon to apply the labels.
221
222

COMMANDS

224       semanage fcontext can also be used to manipulate default  file  context
225       mappings.
226
227       semanage  permissive  can  also  be used to manipulate whether or not a
228       process type is permissive.
229
230       semanage module can also be used to enable/disable/install/remove  pol‐
231       icy modules.
232
233       semanage port can also be used to manipulate the port definitions
234
235       semanage boolean can also be used to manipulate the booleans
236
237
238       system-config-selinux is a GUI tool available to customize SELinux pol‐
239       icy settings.
240
241

AUTHOR

243       This manual page was auto-generated using sepolicy manpage .
244
245

SEE ALSO

247       selinux(8), openhpid(8), semanage(8), restorecon(8),  chcon(1),  sepol‐
248       icy(8), setsebool(8)
249
250
251
252openhpid                           19-06-18                openhpid_selinux(8)
Impressum