1srvsvcd_selinux(8) SELinux Policy srvsvcd srvsvcd_selinux(8)
2
3
4
6 srvsvcd_selinux - Security Enhanced Linux Policy for the srvsvcd pro‐
7 cesses
8
10 Security-Enhanced Linux secures the srvsvcd processes via flexible
11 mandatory access control.
12
13 The srvsvcd processes execute with the srvsvcd_t SELinux type. You can
14 check if you have these processes running by executing the ps command
15 with the -Z qualifier.
16
17 For example:
18
19 ps -eZ | grep srvsvcd_t
20
21
22
24 The srvsvcd_t SELinux type can be entered via the srvsvcd_exec_t file
25 type.
26
27 The default entrypoint paths for the srvsvcd_t domain are the follow‐
28 ing:
29
30 /usr/sbin/srvsvcd, /opt/likewise/sbin/srvsvcd
31
33 SELinux defines process types (domains) for each process running on the
34 system
35
36 You can see the context of a process using the -Z option to ps
37
38 Policy governs the access confined processes have to files. SELinux
39 srvsvcd policy is very flexible allowing users to setup their srvsvcd
40 processes in as secure a method as possible.
41
42 The following process types are defined for srvsvcd:
43
44 srvsvcd_t
45
46 Note: semanage permissive -a srvsvcd_t can be used to make the process
47 type srvsvcd_t permissive. SELinux does not deny access to permissive
48 process types, but the AVC (SELinux denials) messages are still gener‐
49 ated.
50
51
53 SELinux policy is customizable based on least access required. srvsvcd
54 policy is extremely flexible and has several booleans that allow you to
55 manipulate the policy and run srvsvcd with the tightest access possi‐
56 ble.
57
58
59
60 If you want to allow all domains to execute in fips_mode, you must turn
61 on the fips_mode boolean. Enabled by default.
62
63 setsebool -P fips_mode 1
64
65
66
67 If you want to allow confined applications to run with kerberos, you
68 must turn on the kerberos_enabled boolean. Enabled by default.
69
70 setsebool -P kerberos_enabled 1
71
72
73
75 The SELinux process type srvsvcd_t can manage files labeled with the
76 following file types. The paths listed are the default paths for these
77 file types. Note the processes UID still need to have DAC permissions.
78
79 cluster_conf_t
80
81 /etc/cluster(/.*)?
82
83 cluster_var_lib_t
84
85 /var/lib/pcsd(/.*)?
86 /var/lib/cluster(/.*)?
87 /var/lib/openais(/.*)?
88 /var/lib/pengine(/.*)?
89 /var/lib/corosync(/.*)?
90 /usr/lib/heartbeat(/.*)?
91 /var/lib/heartbeat(/.*)?
92 /var/lib/pacemaker(/.*)?
93
94 cluster_var_run_t
95
96 /var/run/crm(/.*)?
97 /var/run/cman_.*
98 /var/run/rsctmp(/.*)?
99 /var/run/aisexec.*
100 /var/run/heartbeat(/.*)?
101 /var/run/corosync-qnetd(/.*)?
102 /var/run/corosync-qdevice(/.*)?
103 /var/run/corosync.pid
104 /var/run/cpglockd.pid
105 /var/run/rgmanager.pid
106 /var/run/cluster/rgmanager.sk
107
108 root_t
109
110 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
111 /
112 /initrd
113
114 srvsvcd_var_lib_t
115
116
117 srvsvcd_var_run_t
118
119 /var/run/srvsvcd.pid
120
121
123 SELinux requires files to have an extended attribute to define the file
124 type.
125
126 You can see the context of a file using the -Z option to ls
127
128 Policy governs the access confined processes have to these files.
129 SELinux srvsvcd policy is very flexible allowing users to setup their
130 srvsvcd processes in as secure a method as possible.
131
132 STANDARD FILE CONTEXT
133
134 SELinux defines the file context types for the srvsvcd, if you wanted
135 to store files with these types in a diffent paths, you need to execute
136 the semanage command to sepecify alternate labeling and then use
137 restorecon to put the labels on disk.
138
139 semanage fcontext -a -t srvsvcd_var_lib_t '/srv/mysrvsvcd_con‐
140 tent(/.*)?'
141 restorecon -R -v /srv/mysrvsvcd_content
142
143 Note: SELinux often uses regular expressions to specify labels that
144 match multiple files.
145
146 The following file types are defined for srvsvcd:
147
148
149
150 srvsvcd_exec_t
151
152 - Set files with the srvsvcd_exec_t type, if you want to transition an
153 executable to the srvsvcd_t domain.
154
155
156 Paths:
157 /usr/sbin/srvsvcd, /opt/likewise/sbin/srvsvcd
158
159
160 srvsvcd_var_lib_t
161
162 - Set files with the srvsvcd_var_lib_t type, if you want to store the
163 srvsvcd files under the /var/lib directory.
164
165
166
167 srvsvcd_var_run_t
168
169 - Set files with the srvsvcd_var_run_t type, if you want to store the
170 srvsvcd files under the /run or /var/run directory.
171
172
173
174 srvsvcd_var_socket_t
175
176 - Set files with the srvsvcd_var_socket_t type, if you want to treat
177 the files as srvsvcd var socket data.
178
179
180
181 Note: File context can be temporarily modified with the chcon command.
182 If you want to permanently change the file context you need to use the
183 semanage fcontext command. This will modify the SELinux labeling data‐
184 base. You will need to use restorecon to apply the labels.
185
186
188 semanage fcontext can also be used to manipulate default file context
189 mappings.
190
191 semanage permissive can also be used to manipulate whether or not a
192 process type is permissive.
193
194 semanage module can also be used to enable/disable/install/remove pol‐
195 icy modules.
196
197 semanage boolean can also be used to manipulate the booleans
198
199
200 system-config-selinux is a GUI tool available to customize SELinux pol‐
201 icy settings.
202
203
205 This manual page was auto-generated using sepolicy manpage .
206
207
209 selinux(8), srvsvcd(8), semanage(8), restorecon(8), chcon(1), sepol‐
210 icy(8), setsebool(8)
211
212
213
214srvsvcd 19-06-18 srvsvcd_selinux(8)